This item is also listed in the following categories:
VOLTZ 5000mah 2S 7.4V 50C HARDCASE LiPO STICK BATTERY PACK
Experience the rugged durability of Voltz RC LiPo power with this 5000mAh 7.4V 50C hard case lithium polymer battery suitable for all radio control vehicles. The hard shell provides extra protection for the battery, allowing the RCcar to be driven to its extremes whilst maintaining great power.p>
Specifications
Declaration of Conformity
VZ0317 Declaration of Conformity
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
no complaints about this battery.
Excellent battery with matching cell resistance
I've been using this battery for the last 13 months in my HPI Jumpshot Flux (400kv brushless setup 2wd stadium truck), a TT02 with 17.5t brushless setup and an Associated MT10 (3300kv 4wd 1/10th monster truck). these are just bashing around my back garden/the park and never skate park style bashing. Unfortunately it has now started to puff and not balance charge correctly. It was always storage charged within 12 hours of use and always charged at 1C (5amps). Its not a bad service life but my Corally Sport racing pack i purchased at the same time used in the same cars is still going strong and balance charging quickly with low IR. Bottom line it was a decent cheap punchy battery while it lasted
Yes that will work with Carange brushless or Vantage brushless
Answered by: Ben @ Wheelspin Models
These come with a deans connector as pictured.
If your FMS plane has a deans then yes, that should connect fine.
Answered by: Ben @ Wheelspin Models
Yes, it will work - just make sure your ESC is set to LiPo cut-off mode.
You will also need to either change the connector on your ESC to deans, or use an adapter such as ET0817
Answered by: Ben @ Wheelspin Models
Yes this will work, just make sure to set the ESC to LiPo mode
Answered by: Ben @ Wheelspin Models
Yes
Answered by: Ben @ Wheelspin Models
Yes that would work
Answered by: Ben @ Wheelspin Models
Yes, that will fit that car.
These have a deans connector, so you will either need to change the connector on your car or use an adapter.
Answered by: Ben @ Wheelspin Models
2S cut off is 6v minimum
Answered by: Ben @ Wheelspin Models
Around 25+ mins or so
Answered by: Ben @ Wheelspin Models
Probably around 25-30 mins depending on driving style.
Answered by: Ben @ Wheelspin Models
Maybe around 25 mins depending on how you drive.
Answered by: Ben @ Wheelspin Models
Yes that will fit
Answered by: Ben @ Wheelspin Models
It will work yes, but i suspect you'd want something higher cell count and soft case
Answered by: Ben @ Wheelspin Models
Yes it should fit
Answered by: Ben @ Wheelspin Models
Yes that should fit
Answered by: Ben @ Wheelspin Models
Yes they will work nicely with that
Answered by: Ben @ Wheelspin Models
Yes these have standard xH balance leads
Answered by: Ben @ Wheelspin Models
You'd be better with a round case pack eg C-49440 for a better fit
Answered by: Ben @ Wheelspin Models
You'd be better with a round case pack eg C-49440 for a better fit
Answered by: Ben @ Wheelspin Models
Afraid I don't know what that is sorry..
Answered by: Ben @ Wheelspin Models
Probably around 25 mins or so , depending on driving style
Answered by: Ben @ Wheelspin Models
No these will be too large. V797311 looks to be the battery you need
Answered by: Ben @ Wheelspin Models
Yes that should fit a Savage XS
Answered by: Ben @ Wheelspin Models
No sorry you need a round case lipo for this chassis .
Answered by: Anthony @ Wheelspin Models
Yes that should fit
Answered by: Ben @ Wheelspin Models
Yes they will fit.
Answered by: Steve W @ Wheelspin Models
Yes it will fit that will take around 8 hours on the original charger.
Answered by: Steve W @ Wheelspin Models
Yes it will fit but the connector is different and the esc will need to be put into lipo mode.
Answered by: Steve W @ Wheelspin Models
That is the battery we recommend and the biggest that will fit, the carnage brushless is 2s lipo maximum so you cannot run 3s lipos im afraid.
Answered by: Steve W @ Wheelspin Models
Yes this would plug straight in to the side of the charger, You could if you wanted to, to give you more wire use a 2s balance extension lead like ET0245
Answered by: Si @ Wheelspin Models
Yes it will but it has a deans connector on it so you will need a deans to traxxas adaptor O-LGL-ADAPT16
Answered by: Steve @ Wheelspin Models
Yes, this will work for you but you will need a deans charge lead ET0268
Answered by: Si @ Wheelspin Models
Yes that would work fine.
Answered by: Steve @ Wheelspin Models
No, as your battery tray is the older round type design, you need a round case lipo where the leads come from the middle of one of the ends, something like this would work for you.
Answered by: Si @ Wheelspin Models