This is a pair of Pro-Line Trencher 2.8" All Terrain Tires Mounted on Desperado Black Wheels for Electric Stampede®/Rustler® Rear. Pro-Line is very excited to announce the availability of the Trencher 2.8" pre-mounted to the wheel that you need. Making your truck the toughest looking one on the block has never been easier now with the Trenchers premounted to the Desperado wheels. We take the guess work out of your glue job by doing the mounting for you so you can spend your time having fun!
Pro-Line's world class development team spent several months of research, development and testing to ensure that the Trencher 2.8" tire will perform above and beyond your expectations in any condition that you take your truck. Whether it is loose or hard-packed dirt, sand, snow, street or gravel the Trencher 2.8" tire is up to the task. If you only buy one wheel and tire combo for your truck, this is the one to buy!
The Trencher tread was designed to have ultimate traction combined with long-lasting durability. Each tire lug is shaped to dig into whatever surface you are running on and is ultra-thick so that it is extremely durable. The popular Trencher tread pattern can also be found on Short Course, 40 Series Monster Truck and the Baja 5T, so if you love them on your Electric Stampede® or Electric Rustler®, be sure to get them all!
Trencher 2.8" Tires and Desperado 2.8" Wheels featured on Big Squid under Evan's 5 Minutes
Evan stated, "I recently got a couple sets of Pro-Line 2.8" Trencher tires and the new 2.8" Desperado wheels for my Traxxas Stampede 4x4. As you can see from the picture, they look completely awesome... Beauty is only skin deep of course, so putting these out on the track was the real test. I can honestly say that these tires and wheels woke this truck up all over again for me! The tires have better traction on every surface, and the slightly larger size makes backflips even on 2S almost easy. The foam inserts help eat up a lot of rough terrain and make the truck steer and drive more predictable... It holds a better line under power, is much more controllable on the ground or in the air, and draws plenty of attention from onlookers with the backflips and dirt roosts. After 10 or so packs on all kinds of surfaces, I see very little wear, which is also very cool. I like these tires so much I went out and got a set for my Stampede 2x4! These tires and wheels are totally tentacles!"
See Our Full Line of Pre-Mounted Tires!
Customer testimonial:
Just bought and installed a set of Pro-Line Trenchers for my VXL Rustler. I'm more than happy with how well they perform, quite surprised. Just had to email and thank you guys for the great job. I'll be buying a Pro-Line body next :) Keep up the great work!
-Dakota Todd
Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear.
Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.
Please note: All tires & wheels are sold in pairs, unless otherwise noted.
Stampede®, JATO® and Rustler® are registered trademarks of Traxxas® L.P
Features
- Horizontal H shaped tread for ridiculous amounts of traction and side-to-side stability
- Over-sized tall tread are second-to-none in durability and longevity
- Extremely detailed sidewall design for that tough off-road look
- Official Pro-Line logo and Trencher name embossed on sidewall of tire
-
Made in the USA, since 1982 - Read about Pro-Line Racing's History
- Aggressive 6-spoke wheel design
- Molded in Bead-loc ring for scale look
- Made out of durable nylon material
What's Included
Fits
-
Traxxas® Stampede® Electric Rear
-
Traxxas® Rustler® Electric Rear
- Other 1:10 Monster Trucks with 12mm Hexes
Specs
| Height: |
|
4.87" (124mm) |
| Width: |
|
2.86" (73mm) |
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
Hi would these fit on the helion select four 10 sc?
Asked by Dean on 12th August 2016
Not really, they would probably foul the bodyshell. The Select Four is a Short Course Truck so you'd be best sticking with Short Course tyres.
Answered by: Ben @ Wheelspin Models
Please can you let me know if this wheel and tyre will fit the HPI Jumpshot MT?
Asked by Lee on 20th October 2016
Yes, they should fit your Jumpshot as they use the same 12mm hex.
Answered by: Ben @ Wheelspin Models
Will these fit on a traxxas slash 2wd if I raise the body?
Asked by Archie Blair on 1st January 2017
If you clear the bodyshell out the way, then yes they will fit on the axles.
Answered by: Ben @ Wheelspin Models
do they have an offset, would they fit an ftx viper and what is the width many thanks
Asked by James on 7th January 2018
Width is approx 73mm. They are designed to fit Traxxsa stampede/rustler rear, I'm afraid we've not tried them on an FTX Viper but would assume they should be somewhere close.
Answered by: Ben @ Wheelspin Models
With the correct body mods, will these fit straight on to a slash 4x4?
Asked by Neil on 20th May 2018
They are 12mm hex so will in theory fit - however you'd be better with SC wheels on your Slash, eg PL1159-13 or PL1190
Answered by: Ben @ Wheelspin Models
Would these be a good wheel/tyre upgrade for a hpi e firestorm flux. Mainly used on grass dirt?
Asked by Andrew on 7th March 2019
Yes, those would work well on a firestorm flux.
Answered by: Ben @ Wheelspin Models
Hi! Will these fit my Stampede VXL 4x4 please?
Asked by Stephen Calderbank on 11th June 2020
Yes those should fit
Answered by: Ben @ Wheelspin Models
