eTronix Photon 2.1W 45 AMP Splashproof Brushless ESC

eTronix Photon 2.1W 45 AMP Splashproof Brushless ESC

Brand: eTronix

Part Number: ET0125

£35.09 Web Price RRP £38.99

In stock: Usually ships same day

Request Price Match

ETRONIX PHOTON 2.1W 45AMP SPLASHPROOF BRUSHLESS ESC

With systems available ranging from 45A through to 120A there is something within the Photon range for every 1/10th application. With the additional programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs. (available separately)

When choosing your new ESC/ESC and motor combo, please take note of the relevant motor and battery cell count limits.


ESC Motor Limit:
  • 2S Battery - 4350KV
  • 3S Battery - 2950KV
  • 4S Battery - Not Compatible
Spec Check:
  • Splashproof
  • 2-3S Lipo
  • 5-10S NiMH/NiCd
  • 2A 6V BEC Output
  • 4 Pole sensorless brushless motor
  • 45A Constant current
  • 260A Burst current
  • Dimensions 45x33x37mm (without fan)
  • Weight 90g

  • Brand: eTronix
  • Part No: ET0125
  • Barcode: 5055323967658
  • Motor Type: Brushless
  • Fitment: Standard Part
  • LiPo Compatible: Yes

Two Simple UK Delivery Options

Royal mail at £3.95, or Express at £6.95.

Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

what size are the bullet connectors on this ecs and with it work with the maverick strada brushless motor many thanks wayne rogers
Asked by Wayne Rogers on 9th November 2017

3.5mm sockets on the motor wires and Deans on the battery.

It should work OK with the Maverick brushless motor, but we have not tried it specifically.

Answered by: Ben @ Wheelspin Models

What width are the plugs that connect it to the motor?
Asked by Leo Gargiulo on 20th February 2018

The ESC does not come with any connectors as all when purchased at this part number, only the combos come with plugs, 3.5mm ones.

 

Answered by: Ben @ Wheelspin Models

Does the ETO126 E.tronix Photon 2.1w60 have reverse .
Asked by Derek Coffin on 22nd January 2020

Yes these have reverse

Answered by: Ben @ Wheelspin Models

Does this come with banana plug and bullet for motor thank you
Asked by Louis on 29th May 2020

ET0125 doesn’t come with any connectors. ET0125FTX is factory fitted with a deans connector for the battery and the same motor bullet/banana connectors as an FTX Carnage Brushless. (3/3.5mm? The exact size I cannot remember).

Answered by: Ben @ Wheelspin Models

Will it work with my ftx vantage
Asked by Stefan on 26th January 2021

Yes if you have the brushless vantage

Answered by: Ben @ Wheelspin Models

Hi whats the maximum recommended voltage for this with a 3s lipo and a 2950kv motor in my ftx carnage?
Asked by Matthew on 21st March 2021

This is 2S max, and at only 45A is low rated - I wouldn't use this in a heavier truck like the carnage

Answered by: Ben @ Wheelspin Models

Hi, I’m looking for an esc for a surpass hobby C3530 1400kv brushless and sensor less motor (running a RC car). Will this esc do the job? What I’m unsure about is the esc specification says “4 pole” motor - the surpass motor spec sheet says it has 14 poles! I have a quicrun 16bl30 running a 1100kv variant of the C3530 motor (rated at 30 amps) but the amp rating on the 1400kv motor is stated as 35 amps and the quicrun 60 amp esc seems a bit oversized for what I need. I’m also using a 3s lipo battery. Any suggestions would be much appreciated. Thanks, Robert
Asked by Robert on 19th February 2023

I would look at something like this and use a higher amp just in case  ET0126

Answered by: Si @ Wheelspin Models

Does this come soldered
Asked by Oliver on 26th July 2023

No this is the soldered version ET0125FTX

Answered by: Steve @ Wheelspin Models

Ask a Question Write a Review