Multiplex Multimate 82094

• Multipurpose programming tool

Programming device and servo tester in one … the convenient tool for adjusting and programming MULTIPLEX products, such as receivers, speed controllers and servos. The usual methods of programming devices such as speed controllers using the transmitter stick, or a PC or laptop, tend to be rather involved. You can now eliminate them completely - whether you are working in the living room, the workshop or at the flying field. Many receivers and brushless speed controllers in the current MULTIPLEX range can be adjusted and programmed easily and quickly using the MULTImate, as can a series of HiTEC digital servos. The MULTImate can be updated at any time in order to handle new devices as they are introduced. The unit also includes an integral servo tester with manual and automatic modes. The MULTImate can therefore be used to operate all current RC components without the need for a receiver and transmitter. The 2 x 16-character LCD screen includes software-controlled contrast adjustment, while the switchable backlighting makes it very easy to read even in bright ambient conditions. The unit is operated using a philosophy based on that of our COCKPIT SX: the 3-D digi-adjustor is used to select functions, while the comprehensible screen texts lead you intuitively through the menu system. Finally you can forget all about those sleepless nights spent poring over operating instructions. A menu is provided for selecting the screen language: German and English are available. The device is designed to be efficient and ergonomic in operation. For example, the MULTImate is of symmetrical shape, which means that left-handers will find it just as easy to use as right-handers, while the large adjustment wheel of the 3-D digi-adjustor is simple to operate with the thumb.

Free updates can be downloaded from the MULTIPLEX website at any time, keeping the MULTImate up-to-date with the latest software. The updates are transferred to the device using either of the optional PC interface leads (# 8 5149 USB PC lead, or # 8 5150 serial PC lead). This makes the MULTImate futureproof; even today it is prepared for use with new generations of receivers, servos and speed controllers, as well as other equipment from the MULTIPLEX stable. At present the MULTImate can be used to program the following types of device:

MULTIPLEX „RX-SYNTH IPD" receivers
• Read out the error count memory separately for each type of error (signal, field strength, low voltage)
• Configure error counter
• Activate FAIL-SAFE separately for each servo
• Set FAIL-SAFE and HOLD times
• Display RF channel
• Display receiver type and software version
• Reset to default settings
MULTIPLEX „RX-SYNTH M-PCM" receivers
• Read out the error count memory separately for each type of error (signal, field strength, low voltage)
• Configure error counter
• Activate FAIL-SAFE separately for each servo
• Set FAIL-SAFE and HOLD times
• Display RF channel
• Display receiver type and software version
• Reset to default settings
MULTIcont BL-XX speed controllers
• Set battery type / low-voltage cut-off (LiPo, NiXX)
• Brake (On / Off)
• Reverse motor direction
• Additional for MULTICONT BL XX S-BEC speed controllers
• Low-voltage cut-off (reduce motor power or instant motor cut-off)
• Motor running characteristics ( normal or soft start)
• switching frequency ( 8 or 16 kHz)
• governor mode
HiTEC digital servos (capable of communicating with the

HFP-10 programming device)
• Reverse direction of servo rotation
• Servo transit speed
• Servo dead-zone
• FAIL-SAFE (On / Off / FAIL-SAFE position)
• Servo travels (left / right) and centre