eTronix Photon 2.1FW Waterproof 45A ESC Combo With 11.0R 3450kV Motor

eTronix Photon 2.1FW Waterproof 45A ESC Combo With 11.0R 3450kV Motor

Brand: eTronix

Part Number: ET0416

£80.90 Web Price RRP £86.99

In stock: Usually ships same day

Request Price Match

ETRONIX PHOTON 2.1FW COMBO W/11.0R 3450KV MOTOR/45A ESC

The convenience and performance of brushless technology is available for everyone with the Photon Sensorless Waterproof System from Etronix. Simple to set-up and with a range of sensible KV rated motors for most r/c car applications and abilities the Photon is the ideal brushless start-up package or upgrade from a stock brushed set-up. An ideal choice for any 1/10th buggy, truggy, short course or truck application.

With the supplied programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs.

When choosing your new ESC/ESC and motor combo, please take note of the relevant motor and battery cell count limits.


ESC Motor Limit:

  • 2S Battery - 4350KV
  • 3S Battery - 2950KV
  • 4S Battery - Not Compatible

Adjustable Parameters

  • Cutoff Voltage (automatically detects the number of cells)
  • Running Mode (forward w/o reverse, forward/reverse, forward with pause then reverse)
  • Motor Timing (very low, low, normal, high, very high)
  • Initial Acceleration (low, medium, high, very high)
  • Throttle Percent Reverse (20% through to 100%)
  • Throttle Limit (0% through to 90%)
  • Percentage Braking (10% through to 100%)
  • Percentage Drag Brake (0% through to 30%)
  • Motor Rotation (normal, reverse)
  • Neutral Range (deadband setting 2% through to 10%)

Specifications

  • 2-3S Lipo
  • 5-10S NiMH/NiCd
  • 2A 6V BEC Output
  • 4 Pole sensorless brushless motor
  • 45A Constant current
  • 260A Burst current

 

Two Simple UK Delivery Options

Royal mail at £3.95, or Express at £6.95.

Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

Would this fit on an interceptor 400 heli?
Asked by Andy on 6th January 2017

This is a car system, and I'm afraid we don't sell that heli so are unable to advise

Answered by: Ben @ Wheelspin Models

Hi would this work/fit in a hpi esavage ??
Asked by Barrie on 5th April 2017

Yes, this would physically fit in your e-savage.

Answered by: Ben @ Wheelspin Models

Was looking at one of these combo packages to replace the brushed motor in a Maverick Strada. If this suitable? What is t he difference between 13.0R 2950kV and 11.0R 3450kV?
Asked by Steve Sherwood on 28th May 2018

If it's a Strada TC these would just about be OK - however they are not powerful enough for a truck/buggy. For those we'd look at say ET0430

Answered by: Ben @ Wheelspin Models

Hi there I was wondering what would be the best brushless waterproof engine and chip as its for my electric FTX carnage buggy
Asked by Darren Evans on 24th August 2018

This would fit your Carnage, but you'd be better looking at a higher Amp ESC such as ET0421 or ET0430

Answered by: Ben @ Wheelspin Models

Would this fit into a DHK wolf 1/10 brushed as a replacement ?
Asked by Neil on 9th September 2020

Yes that would fit

Answered by: Ben @ Wheelspin Models

What battery connector does this come with and does any of it need soldering (which I'm not keen on)?
Asked by Jeremy Ebdon on 30th September 2020

There's no connector on these so you would normally solder on your choice of connector.

Answered by: Ben @ Wheelspin Models

hi we have an ftx edge and we are looking to upgrade the motor, batterie and tire do you have any suggestions for me
Asked by Azhar on 15th February 2021

This would work nicely in there.

You could then run a 2S LiPo such as VZ0317

Answered by: Ben @ Wheelspin Models

Will the motor fit in a tamiya chassis
Asked by Jeremy on 2nd July 2022

Yes this will fit most Tamiya chassis that take a 540 size motor.

Answered by: Si @ Wheelspin Models

I'm fitting to upgrade the brushed system on my traxxas stampede. Would this combo work? Also the batteries I am pairing with this is Voltz 5000mAh Hard Case LiPo - 7.4V 2S 50C - Deans VZ0317. Will it physically fit the Stampede?
Asked by Ricky Venter on 22nd January 2024

Yes, this combo would work for you in that car, those batteried would be OK too.

Answered by: Si @ Wheelspin Models

Ask a Question Write a Review