ETRONIX PHOTON SC 2.1FW SYSTEM W/4200KV MOTOR/120A ESC
With systems available ranging from 45A through to 120A there is something within the Photon range for every 1/10th application.
Supplied with (ET0107) Etronix Photon SBS LED Programming Card
80A Specification :-
2-4S Lipo
5-12S NiMH/NiCd
3A 6V BEC Output
4 Pole sensorless bushless motor
80A Constant current
570A Burst Current
120A Specification :-
2-4S Lipo
5-12S NiMH/NiCd
3A 6V BECOutput
4 Pole sensorless bushless motor
120A Constant current
760A Burst Current
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
Yes, this would be OK in the SCORE, you'd need to watch the gearing to ensure it doesn't run too hot however.
Answered by: Ben @ Wheelspin Models
I know of customers running 3s with success if I'm being honest I think 4s would be a massive ask, the heat build up on the motor would be a killer
I think the ET0435 is a much better option, but it comes with a larger motor 8th scale size.
Answered by: Ben @ Wheelspin Models
Yes, that would be a good upgrade for your Helion - it should have enough power for a truck fo that size.
We'd recommend any good 2S or 3S battery.
Answered by: Ben @ Wheelspin Models
This can run 4S in lighter 1:10 models. As ever, please keep an eye on your ESC and motor temperatures.
Answered by: Ben @ Wheelspin Models
Yes that would work well in the Carnage.
Answered by: Ben @ Wheelspin Models
These are supplied without battery connector, so yes you can simply solder on your choice of connector.
Answered by: Ben @ Wheelspin Models
Yes it should be OK, however as always please keep an eye on motor/ESC temperatures and gear accordingly.
Answered by: Ben @ Wheelspin Models
These have a 5mm diameter shaft.
Answered by: Ben @ Wheelspin Models
Yes this will fit a carnage but will run on 2s lipo maximum
Answered by: Simon @ Wheelspin Models
These come without a connecotr - you will need to solder on whatever connector you wish to use.
Answered by: Ben @ Wheelspin Models
It'll be a bit big for that sorry- and has a 5mm shaft
Answered by: Ben @ Wheelspin Models
Yes that would work nicely in there.
Answered by: Ben @ Wheelspin Models
I think with this motor, 4S is going to be too high
Answered by: Ben @ Wheelspin Models
Yes, that would fit - just bear in mind it's a 5mm shaft.
It might be overkill - something like HW38010203 is probably better suited.
Battery I'd use say VZ0341
Answered by: Ben @ Wheelspin Models
This would likely fit the TT truggy, but too large for the TT-02
Answered by: Ben @ Wheelspin Models
Yes this motor and ESC would fit in to that car.
Answered by: Si @ Wheelspin Models
No that would melt very quickly you need a 1/8 scale system like this HW38010400
Answered by: Steve W @ Wheelspin Models
No this is 1/10 scale you need HW38010400
Answered by: Steve W @ Wheelspin Models