Add a radio system, steering servo, batteries and charger to your new model. Note, you may also wish to choose some bodyshell paint from our range.
1 x eTronix Pulse EX2 Sport - 2 Channel 2.4Ghz Radio Set #ET1060 | |
1 x EP Super Duty 3000mAh NiMh Stick Pack - 7.2v - Tamiya Connector #SCH-EP3000S | |
1 x Tamiya NiMh/NiCd Trickle Charger - UK Plug #HC-ACS48T | |
1 x Power HD 1812MG Waterproof Metal Geared Servo - 18kg - 0.12s #HD-1812MG |
saving you £31.29 over RRP!
Add a better specification radio system, steering servo, higher capacity battery and fast charger to your new Tamiya model. Note, you may also wish to choose some bodyshell paint from our range.
1 x HPI Plazma 1.5V Alkaline AA Battery (4Pcs) #HPI-101939 | |
1 x eTronix Pulse EX2 Sport - 2 Channel 2.4Ghz Radio Set #ET1060 | |
1 x Voltz 5300mAh NiMh Stick Pack - 7.2v - Tamiya Connector #VZ0025 | |
1 x Savox SW0231MG+ Waterproof Metal Gear Digital Servo - 15kg - 0.17s #SAV-SW0231MG+ | |
1 x Ansmann Tamiya AC/DC Delta 3 Fast NiMh Charger #HC-AC3001 |
saving you £36.88 over RRP!
Step Up with this Sporty Evolution of the TT-02!
This sporty evolution of the TT-02 chassis sees the efficient shaft-driven 4WD unit given newly-designed parts and gives users the ability to make setup adjustments across the board, making it great for racing! It is equipped with long reversible suspension arms, and rigid metal suspension mounts. The rear is set up with 3°of toe-in. CVA oil dampers are attached to specially-designed 3.0mm thick FRP damper stays, with optimum damper angle and rebound stroke providing excellent road holding. Turnbuckle upper arms and steering linkage allow fuss-free adjustment of camber and front toe. Power loss is minimized by the use of full ball bearings and metal cup joints and drive shafts.
Featured Components
- Reversible Suspension Arms
- CVA Oil Shocks
- FRP Front & Rear Damper Stays (newly-designed)
- Metal Suspension Mounts (w/3°rear toe-in)
- Metal Wheel Axles, Gearbox Joints & Drive Shafts
- Full Ball Bearings
- Turnbuckle Upper Arms & Steering Linkage
- Die-Cast Metal Hex Wheel Hubs
The chassis utilizes reversible suspension arms and newly-designed metal suspension mounts. Features turnbuckle upper arms.
Newly-designed FRP front and rear damper stays combine with CVA oil shocks for superior road handling.
The chassis is equipped with durable metal drive shafts and gearbox joints.
Specifications
- Length: 385mm, Width: 187mm
- Wheelbase: 257mm
- Tire Width/Diameter: 24/64mm (Front & Rear)
- Bathtub-type Frame
- Shaft Driven 4WD
- Front/Rear 4-Bevel Resin Differentials
- 3-Piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension
- CVA Oil Shocks
- Gear Ratio = 8.27:1 (10 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
- Torque-Tuned Motor
- Full Ball Bearings
- Electronic Speed Controller (ESC) is sold separately.
Separately Required Items
- 2-Channel R/C Unit with ESC
- Battery Pack & Charger
- R6/AA/UM3 batteries for transmitter
- Body
This item is over £100, so qualifies for free standard UK shipping!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
Yes you can run brushless if you wish
Answered by: Ben @ Wheelspin Models
Most 190mm , 195mm and 200mm touring car bodies will fit this chassis but please go off the dimensions.
Answered by: Steve W @ Wheelspin Models
Yes this comes with full metal bearing set
Answered by: Si @ Wheelspin Models