XRAY XT2
1/10 LUXURY STADIUM TRUCK 2WD
2018 All-new
- Recent EOS Champion and USA Champion platform
- All-in-one concept includes specific parts to build the XT2 for particular track conditions on either Carpet or Dirt:
- Both types of gearboxes and motor plates allowing positioning of the motor in lower position (Carpet) or upper position (Dirt)
- Gear differential (Carpet) and ball differential (Dirt)
- Two different hardness of suspension arms: medium (Dirt), hard (Carpet)
- Two different rear shock towers: composite (Carpet), graphite (Dirt)
- Both types of composite battery straps to fit two different gear boxes
- Both types of composite mounts for upper brace to fit two different gear boxes
- Composite gear cover to protect the gear box from dirt
- New shorter front composite chassis front brace allows mounting of new graphite side guard brace to adjust front chassis flex
- New graphite chassis side guard brace for increased stability and performance
- New secure steering linkage mounting increases reliability of the steering assembly
- New shock absorber lower shims give more precise shock shaft movement
- New shock absorber O-rings for better sealing and shock performance
- New suspension pin washers prevent the suspension pins from coming out, increasing reliability
General
- Recent EOS Champion and USA Champion platform
- All-in-one concept includes specific parts to build the XT2 for particular track conditions on either Carpet or Dirt:
- Both types of gearboxes and motor plates allowing positioning of the motor in lower position (Carpet Edition) or upper position (Dirt Edition)
- Gear differential (Carpet Edition) and ball differential (Dirt Edition) included
- Based on the ultra-successful XB2 platform
- Full compatibility and interchangeable parts
- Designed for highest performance at all levels of racing
- Engineered with attention to smallest details
- Manufactured with legendary artistic craftsmanship from premium European materials
- EFRA, ROAR, FEMCA spec compliant
- Super easy to build, set up, maintain, and drive
- Developed, designed, and styled by European Champion Martin Bayer and Dipl. Eng. Juraj Hudy, manufactured exclusively by XRAY in Europe in the world's most sophisticated RC manufacturing facility
- Setting the new benchmark for premium quality, reliability and performance
- Premium XRAY service & support
Chassis
- Optimal chassis weight distribution & balance
- Both types of gearboxes and motor plates allowing positioning of the motor in lower position (Carpet Edition) or upper position (Dirt Edition)Unique XRAY Multi-Flex™ technology for easy chassis flex adjustment
- Swiss 7075 T6 hardcoated 2.0mm aluminum chassis: lightweight, strong, rigid
- Electronics layout allows for moving the batteries frontwards/rearwards, as well as using standard or mid-size servos and either using saddle pack or short pack batteries
- Composite side guards are an integral part of the XT2 Multi-Flex™ system
- Shorter front composite chassis front brace allows mounting of new graphite side guard brace to adjust front chassis flex
- Custom-designed front lower chassis brace, available in medium and hard hardness for specific track conditions
- Front protection bumper
- Custom-designed upper deck, available in medium and hard hardness for specific track conditions
- Swiss 7075 T6 aluminum motor plate
- Both types of composite battery straps to fit two different gear boxes with foam spacer
- Lightweight, strong composite shock towers with multiple shock mounting positions (Carpet Edition) & graphite rear shock tower (Dirt Edition)
- Pre-drilled centerline holes for easy balancing with the HUDY Chassis Balancing Tool #107880
Drivetrain & Differentials:
- Conventional gear-driven 2WD off-road stadium truck
- Unique gear box, Gear Box and Motor Plate with lowered top shaft, forward-shifted motor for improved steering and handling on higher-traction surfaces
- Included rear gear differential with adjustable oil viscosity, 53T gear & internal satellite gears (Carpet Edition)
- Included externally-adjustable ball differential, 53T gear & axial bearings (Dirt Edition)36T (Carpet Edition) & 25T (Dirt Edition) graphite composite idler gears
- 20T super-lightweight Swiss 7075 T6 hardcoated aluminum top shaft
- Robust slip-adjustable clutch with 81T main spur gear molded from exclusive secret blend of composite material
- 3-pad slipper clutch with ultra-efficient SLS material for more efficient & precise slip adjustment, and HUDY Spring Steel™ hardened outdrives for extra lifespan and reliability
- Constant velocity drives (CVD) are manufactured from special HUDY Spring Steel™ for reduced weight and increased durability
- Ultra-lightweight 12mm wheel hex drive hubs CNC-machined from Swiss 7075 T6 and additionally black-coated have ultra-true hex clamping design which ensures solid mounting of the wheel
- Full set of 22 high-speed, blue-sealed ball-bearings are used throughout the drivetrain to ensure maximum efficiency, degreased and oiled with AeroShell® Fluid 12 for maximum smoothness and long life
Suspension
- Integrated Suspension Settings (I.S.S.) for quick & easy suspension geometry setting using eccentric bushings inserted into Swiss 7075 T6 aluminum suspension holders
- Specially-designed suspension components manufactured from carefully formulated custom composite mixtures to ensure proper flex and durability
- Race-perfected suspension geometry for superior performance and versatility in all racing conditions.
- Suspension arms are available in medium, hard and graphite hardness for specific track conditions
- Suspension parts: steering blocks, caster blocks and uprights are available in medium and hard hardness for specific track conditions
- Lower composite arm mount with integrated 26° kick-up angle; optional aluminum and brass arm mounts available
- Lightweight, rigid caster blocks can achieve different overall caster angles using included caster bushings
- Tiny yet tough steering blocks comprised of composite steering blocks + graphite Ackermann extensions
- Adjustable weight balance & wheelbase via included shims on outer suspension pins
- Compact rear uprights with 0° toe and 6 different upper roll center positions
- HUDY Spring Steel™ material for turnbuckles (featuring a tougher core) is used for front & rear upright linkages, and steering system.
- Front anti-roll bar manufactured from special spring steel material to stabilize the car at front is mounted to the front body mount & can be easily adjusted via linkages; laser-engraved markings for easy identification, available in different sizes for fine-tuning
- Optionally available rear anti-roll bar set to stabilize the rear of the car; easily adjusted via linkages; laser-engraved markings for easy identification, available in different sizes for fine-tuning
- Suspension pin washers prevent the suspension pins from coming out, increasing reliability
Steering
- Simple yet effective dual-arm steering system
- Secure steering linkage mounting increases reliability of the steering assembly
- Fully bearing-equipped with 8 high-speed ball-bearings for very precise steering
- Easily-adjustable Ackermann by quickly changing the steering link mounting positions on the steering plate
- Bump steer adjustment for more aggression
- Ackermann adjustment via included shims or using various graphite extension plates on steering blocks
Shocks
- Consistent, reliable, membrane-free shocks with bleed-screw shock cap design feature up-stop & downstop adjustment via shims (under shock collar, and under pistons, respectively)
- Swiss 7075 T6 aluminum shock bodies, lower nut & bleeder shock caps
- Super-precise molded Delrin™ pistons are offered with 2-hole & different diameters (1.6mm & 1.7mm) for precise shock adjustment, for custom adjustment, a set of blank pistons (no holes) are also included
- Shock rods are machined from a special steel material, precision hand-ground for maximum smooth operation and additionally hardened for increased lifespan
- Premium shock springs designed specifically to complement the XT2 shocks; manually measured, selected and matched into pairs to guarantee equal length and damping characteristics; laser engraved for easy identification
- Full line of linear -or- progressive shock springs available
- Premium silicone oils laboratory tested and calibrated to ensure highest possible consistency and quality
Body, Wings, Wheels:
- High-downforce, low-profile aerodynamic Lexan™ body designed to perfectly fit the XT2, features high-downforce areas (including front window and top roof flow channels) for proper air flow, and side downforce areas for higher stability.
- Tough composite side guards feature double-sided Velcro™ tape to seal the body perfectly to the chassis and seal against dirt.
- Effective rear wing was designed to work perfectly with the XRAY XT2 body. Made from strong Lexan™ material, the wing is supported on the wing mounts by extra flat shims to better support and extend the life of the wing.
- Specially designed 12mm hex hub wheels for high-competition racing; featuring reinforcement ribs to eliminate deformation and molded from very flexible material to retain shape even after impacts (available as option only)
Assembly, Set-up & Support:
- Premium 3D full-color Instruction Manual & supplementary sheets
- To fully understand the set-up possibilities we recommend the legendary HUDY Set-up Book which is loaded with over 40 pages of high-quality pictures and easy-to-read RC car set-up explanations
- Exclusive Virtual Online Setup Sheet database with thousands of set-up sheets for race tracks around the world
- Premium, unmatched XRAY online support
Adjustment Possibilities:
- Fully-adjustable front and rear suspension geometry: caster, camber, rear toe, kick-up, anti-squat, ride height, downstops, track-width, roll center, wheelbase, Multi-Flex™
- Adjustable rear differential action
- Adjustable slipper clutch
- Adjustable HUDY Sprint Steel™ turnbuckles (steering, front & rear upper links)
- Multiple upper & lower shock mounting locations at front & rear
- Adjustable Ackermann and bumpsteer
- Adjustable front anti-roll bar
- Optional adjustable rear anti-roll bar
- Chassis pre-drilled holes for weight balance adjustment
|
Dimensions
|
| Class: | 1/10 electric 2WD off-road stadium truck |
| Width: | Adjustable 313-319mm |
| Length: | 319mm (420 with wing) |
| Wheelbase: | Adjustable 289-294mm |
| Weight: | 920g |
| Ready-to-run weight: | 1900g |
|
Chassis
|
| Chassis: | CNC-machined Swiss 7075 T6 aluminum 2mm |
| Front upper deck: | Hard composite |
|
Suspension
|
| Suspension: | Adjustable suspension via Integrated Suspension System I.S.S. |
| Rear suspension: | Lower arm with adjustable upper camber link |
| Front suspension: | Lower arm with adjustable upper camber link and with adjustable caster 0°, 2.5° and 5° |
| Rear upright: | Composite 0° toe-in with dual arm mounting and 7 roll center positions |
| Shocks: | Membrane free shock absorbers with Delrin pistons |
| Shock towers: | Composite front and rear shock towers include multiple shock positions (Carpet Edition) & Graphite rear shock tower (Dirt Edition) |
|
Drivetrain
|
| Type: | 2WD |
| Primary: | Pinion / spur |
| Drive shafts: | HUDY Spring Steel™ CVD drive shafts |
| Differential: | Sealed gear differential, 6 gear, silicone-filled (Carpet Edition) Hard coated ball differential (Dirt Edition) |
| Slipper clutch: | Adjustable 3-Pad |
| Bearings: | Rubber-sealed high-speed bearings |
|
Gearing
|
| Primary ratio: | 1:2.65 |
| Gear Box gear: |
Message via Facebook Messenger
Message via WhatsApp