Associated Trophy Rat Brushless - RTR

Associated Trophy Rat Brushless - RTR

Brand: Associated

Part Number: AS70019

£311.49 Web Price RRP £349.99

Shadow stock: Usually ships within 2 days

Request Price Match

FINANCE AVAILABLE

LiPo batteries are the latest craze to hit the RC scene and provide approximately 20% more runtime and power than comparable NiCd/NiMh batteries.

1 x Voltz 4000mAh Hard Case LiPo - 7.4v 2S 50C - Deans #VZ0310
1 x eTronix PowerPal EZ-4 50W LiPo Charger #ET0225

saving you £44.50 over RRP!

Upgrade to a higher performance battery pack and charger with this pro spec combo

1 x Voltz 4000mAh Hard Case LiPo - 7.4v 2S 50C - Deans #VZ0310
1 x eTronix Powerpal 3.0 AC/DC Performance Charger/Discharger - 80W 10A #ET0202

saving you £46.50 over RRP!

TEAM ASSOCIATED TROPHY RAT BRUSHLESS RTR TRUCK

Team Associated's Ready-To-Run 1:10 replica of Northrup Fabrication's Trophy Rat is wrapped around the chassis and engineering of the 9-time R.O.A.R. Short Course National Championship-winning truck.

Starting life as a 1937 International shell, the full-scale Trophy Rat has gone over 1,500 man hours (and counting) from conceptualization to completion. The goal for this build was to accomplish the perfect blend between a trophy truck and a rat rod with an LS6 Corvette engine for a heart. Something that could be used as a daily driver, but also take to the King of Hammers or local road course.

Team Associated's Ready-To-Run 1:10 replica of Northrup Fabrication's Trophy Rat is wrapped around the chassis and engineering of the 9-time R.O.A.R. Short Course National Championship-winning truck. The Trophy Rat is both all show and all go!

The truck features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro which allows vehicle stability to be adjusted to flow with the terrain. A Reedy metal-gear digital high-torque servo and LED lights front and rear round out the Trophy Rat!

The suspension also received an upgrade with the addition of adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox now comes with a heavy-duty sealed-gear differential and externally adjustable V2 slipper clutch. 81mm CVA driveshafts increase traction and chassis support. Hex-drive wheels come standard on the Trophy Rat with realistic off road wheels and tires to keep the truck gripping the ground.

Team Associated Trophy Rat Ready-To-Run Features:

  • Based on the 9-time R.O.A.R. National Champion short-course race truck platform
  • 2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver; featuring built-in adjustable gyro
  • High-torque, metal-gear Reedy Servo with spring style servo saver
  • Powerful Reedy 3300kV Brushless motor
  • Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
  • Realistic Trophy Rat Body based on the Northrup Fabrication's "Trophy Rat"
  • Realistic Method Wheels with 12mm front and rear hex-drive nuts
  • Four integrated LEDs included, 2 front, 2 rear
  • Water-resistant enclosed receiver box
  • Durable and lightweight aluminum top shaft
  • Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
  • Metric hardware throughout
  • 14 precision rubber-sealed ball bearings
  • Durable front and rear body mounts
  • Rear CVA drive shafts for more reliability
  • Aluminum 12mm big bore coil-over shock absorbers
  • 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
  • Rugged steel turnbuckles for adjustable camber and front toe-in
  • Fully adjustable suspension geometry
  • Vertical ball ends for roll center adjustments, front and rear
  • Many Factory Team options already available!

Spec Check:

  • Power Source: Electric
  • Terrain: Off-Road
  • Body Style: Truck
  • Scale Size: 1:10 Scale
  • Assembly Level: Ready-To-Run*
  • Length: 481mm (18.94in)
  • Width: 282mm (11.1in)
  • Wheelbase: 322mm (12.68in)
  • Weight: 1834g (4.04lbs)
  • Drive: 2WD

Please Note: This kit requires the following for completion: 4 x AA batteries, NiMH or LiPo battery with High Current T-Plug & Battery Charger.

 

  • Brand: Associated
  • Part No: AS70019
  • Barcode: 784695700192
  • Scale: 1:10
  • Build Level: Assembled (RTR)
  • Vehicle Type: Buggy
  • Power Source: Electric - Brushless
  • Surface Type: Off Road

Free UK Delivery!

This item is over £100, so qualifies for free standard UK shipping!

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

what is the top speed and is it mostly plastic?
Asked by Mason on 1st February 2021

Most models are "mostly plastic" I guess... Keeps weight down..!

Top speed isn't quoted but I'd estimate around 40mph or so

Answered by: Ben @ Wheelspin Models

what is the main material of the chassis and parts?
Asked by Mason on 17th March 2021

Composite plastics - like pretty much all RC's

Answered by: Ben @ Wheelspin Models

Could I swap in a 3s system in?
Asked by Alex on 1st May 2021

You could fit one yes , but it may strain the gears on the car with that much power through it . 

Answered by: Anthony @ Wheelspin Models

Ask a Question Write a Review