GBP
€ Euro
$ USD
Radient Mistral LED LiPo/NiMH 5A Charger
Brand: Radient
Part No: RDNA0465
In Stock: Usually ships same day
Key Features
- LiPo, LiIon, and NiMH 50W charger
- Use AC (110-240V) or DC (11-18V) power source
- 2-6 cells LiPo
- 1-15 cell NiMH
- 0.1 - 5A charge rate
- Compact size (145x78x47mm) at 255g
- Includes 4 different charger leads
- Well ventilated case design
What's in the Box
- 1x Mistral multi-chemistry AC/DC charger
- 1x Figure 8 AC power lead
- 1x DC power lead with alligator clips
- 1x 4mm bullets to Deans male
- 1x HCT-female to Tamiya-male
- 1x HCT-female to XT60-male
- 1x HCT-male to Futaba-female
Weights & Dimensions
| Weight | 255g | 8.99oz |
| Shipping Weight | 0.48kg | 1.05lbs |
| Product Height | 47mm | 1.85in |
| Product Width | 78mm | 3.07in |
| Product Length | 145mm | 5.71in |
- Age Recommendation: 14+
- Compatible Battery Chemistry: LiPo
- AC Input Voltage: 110-240V
Secured by Stripe
- Brand: Radient
- Part No: RDNA0465
- Barcode: 841704100074
- Input Voltage:
• 12V
• 240V (UK mains) - Included Connectors:
• Deans
• Receiver
• Tamiya
• XH LiPo Balancers
• XT60 - Chemistry:
• LiPo
• NiMh / NiCd
This item is also listed in the following additional categories:
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
good product for little money.
i've got to say this is a great charger, it feels solid and well built, the loud beeps when it starts and stops charging is nice too, come with more than enough adapters too!
WRITE A REVIEW
Questions & Answers
You can use a mains plug or a 12v battery to power the Mistral.
Yes you can use this
This would work yes, as long as the batteries have the correct connector. However due to the Wattage Of the charger it would take a while to charge the 6s battery.
This would be a better option for you ET0202
Yes this will charge NimH batteries, you would choose the NimH setting then set the amps depending on the Mah of your battery
lets say 3000Mah so divide by 1000 = 3 so charger to be set at 3amps
No this does come with a croc type clip for a direct battery connection.
It will yes but with the charger being a 5.0a charger it will be running at full power with a 5000 Mah battery.
That depends on the capacity of the 3S pack.
For a 3000mah, charge at 3A, for 5000, charge at 5A, etc
No sorry you will need , this charger : ET0225
In theory, yes - but I wouldn't recommend it.
Yes, with a CLEC5 adapter
Yes, that would charge that fine with a suitable connector on the battery
Yes, you can adjust the charge rate between 0.1 - 5.0A
Yes, if your battery supports charging at that rate (most do not...)
They are 50W total power output
They will detect what voltage battery you have connected
You'd need both leads in to charge
Set it to 2A and it will charge in just under an hour
Yes, they indicate when charged
At 3A, would take around 45-55 mins
Not that we know to as yet, sorry.
ASK A QUESTION
For more in depth queries, please contact us.