HOBBYWING XERUN AXE 550-2700KV FOC SENSORED B/LESS V1.1 COMBO
Intelligent Torque Output and Speed Closed-loop Control for Easy Control!
The ESC will automatically increase torque to help vehicle overcome the resistance when going up, reduce the torque to help vehicle stabilize and control the speed when going downhill (and prevent vehicle from turning over when going downhill too fast). With the intelligent torque output, driving can become simple and easy.
The XeRun AXE motor, 550er size and 5mm shaft, with 2700KV is hardware specifically adapted to the XeRun AXE FOC speed controller and can only be used with it.
The motor is built with the Hobbywing patented "Staggered Pole" rotor design and the 4-pole motor has extremely low cogging efffect and super small torque ripple. Super soft response and start-up behavior at low speeds is the result.
The motor and controller are connected via a waterproof, special sensor plug.
Specifications ESC
Type: Brushless FOC
Current cont./peak: 60A/360A
Input Voltage: 2S-3S LiPo, 6S-9S NiMH
Motor Limits: Only XeRun-AXE serie of motors
BEC: 6V/7.4V, 4A
Waterproof: Yes
Programmable: Bluetooth and APP "HW LINK"
Size: 47.4x36.2x24.6mm
Weight: 82g
Application: 1/10 Rock Crawler
Specifications Motor
Type: Brushless FOC
Poles: 4
KV Rating: 2700KV
LiPo cells: 2S-3S No Load Current: 2.7A
Outer Diameter: 36.0mm
Length: 66.2mm
Shaft Diameter: 5.0mm
Shaft Length: 16mm
Weight: 289g
Application: 1/10 - 1/8 Rock Crawler Rock Racer
Two Simple UK Delivery Options
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
We Ship Worldwide!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
No product reviews yet!
Will this fit my Trx4 defender? Thank Daz
Asked by Daz on 21st May 2020
Yes that will work well in a TRX-4
Answered by: Ben @ Wheelspin Models
How will the original Trx4 pinion fit this motor as it has a 5mm shaft and the pinion is for a 3.17mm?
Asked by Ian on 3rd June 2020
Ah sorry, no - these have a 5mm shaft, so you would need a 5mm shaft pinion
Answered by: Ben @ Wheelspin Models
Does this come soldered
Asked by James on 19th June 2020
No these are not soldered up
Answered by: Ben @ Wheelspin Models
Hobbywing Xerun AXE V1.1 ESC Combo With 2700Kv FOC
hi what pinion gear do i need for this the 10 tooth gear on my trx4 titan motor is 3mm shaft and on the axe is 5mm
Asked by Jeremy on 30th June 2020
You need 32DP pinions for the TRX-4, so any 32DP 5mm pinions will fit this. eg say TRX5640 TRX5643 or TRX5644
Answered by: Ben @ Wheelspin Models
Do they come with a ESC fan?
Asked by David on 15th July 2020
No , you can fit one if you wish?
Answered by: Anthony @ Wheelspin Models
