DHC-2 Beaver is a single-engine, high-wing, propeller-driven STOL aircraft. It is used for cargo, passenger hauling, aerial application, and has been widely adopted by armed forces as a utility aircraft. Produced from 1947-1967 by de Havilland Canada. The United States Army purchased several hundred; nine DHC-2s are still in service with the Civil Air Patrol for search and rescue. The Royal New Zealand Air Force used the Beaver for expedition to the South Pole.
Dynam has replicated the plane into this beautiful EPO model and features plenty of scale details. With a total of five LEDs on factory fitted on the plane, two LED on each wing and one on the fuselage night flying is possible .Included in the box is conventional landing gear and a set of floats for taking off and landing on water. The floats include dual steerable rudder which provides excellent control on water. The Beaver is flap ready from the factory, all you have to do is connect the servos and linkages in the wings and you are ready to go.
FeaturesMaterial: EPO Foam
Wing Span: 1500mm(59in)
Flying Weight: 1400-1750g
Wing Loading: 58g/dm²
Fuselage Length: 958mm(37.7in)
CG: 45 - 50mm from the leading edge at the wing root
Motor: Detrum BM3720A-KV650:
ESC: TC Skylord 50A ESC
Propeller:2-Blade Prop 13*6
Servo: 7x 9g
Elevator: Yes
Rudder: Yes
Ailerons: Yes
Flaps: Yes
Landing Gear: Float&Fixed gear
EDF: N/A
Floats: Yes
Tx Requirement: 6 Channel or above transmitter
Rx Requirement: 6-Channel receiver
Li-Po Battery: 14.8V 2200~2800mAh,25C
Appr. Assembly Time: 1 hour
Aircraft Type: Seaplane
Pilot Level: Experienced
Appr. Flight Time: 8min
Requires to finish: 6 channel radio and transmitter, 4S 2200mAh LiPo battery
For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.