Your Cart: £0.00
View Cart and Checkout
Arrows Hobby Vector 6 Axis Gyro System

Arrows Hobby Vector 6 Axis Gyro System

Brand: Arrows Hobby

Part No: ARRVEC-AH010

£19.94 RRP £20.99

In Stock: Usually ships same day

Collect Instore

Designed specifically to be the perfect R/C co-pilot, the Vector Flight Control System sits waiting in the wings (not literally) ready to be employed when you need it most. Three transmitter-controlled flight conditions are available. In Stability Mode the unit automatically returns your aircraft to level flight when no control inputs are detected. This is perfect for beginners and instrumental in correcting mistakes that have the potential to ruin your day. Switch to Dynamic Mode and full control of your model is regained, the Vector assisting only to reduce the effect of turbulence, resulting in significantly smoother flying characteristics. Finally, Direct Mode switches the Vector off, allowing you to experience a flight without electronic intervention. Suitable for both S.Bus and PPM control systems the Vector is a small, lightweight, fit and forget unit that lies between your receiver and servos and promises to simply and effectively improve performance and correct mistakes.

Manuals & Parts Explosions:

Manual

Arrows Hobby Vector 6 Axis Gyro System Tech Specs:

  • Shipping Weight: 0.02kg / 0.05lbs
      • Brand: Arrows Hobby
      • Part No: ARRVEC-AH010
      • Barcode: 5051121252774

      This item is also listed in the following additional categories:

      Standard Shipping

      £3.95 to most of the UK

      Express Shipping

      £6.95 to most of the UK

      Worldwide Shipping

      Available at checkout

      Reviews
      No specific product reviews yet, why not write one?
      WRITE A REVIEW
      All reviews are subject to moderation
      Questions & Answers
      Real questions from real customers. Why not ask your own?
      will this fit a efly tasman
      David Needham / 11th June 2024

      Yes that should work.

      Rich @ Wheelspin Models
      Will this work with the arrow bae hawk 50 mm with flysky fs i4 x with A6 reciever thanks
      Kevin / 29th April 2024

      Yes this is an inline gyro system so would work in most planes with most transmitters.

      Si @ Wheelspin Models
      Do the vector gyros work well on Arrows Hobby aircraft
      Peter / 21st December 2023

      Yes they are designed for these planes.

      Steve @ Wheelspin Models
      Does the Arrows Hobby Vector 6 Axis Gyro System work with a Spektrum Rx and 6e Tx ? If so I want 3
      Ian Lauder / 15th November 2023

      Yes it will but it is only really suggested for certain planes and is quite slow , most people tend to use the reflex system instead FMSREF001

      Steve @ Wheelspin Models
      Hi guys, Will this suit any aircraft or is it specifically for the Arrows Bigfoot? I guess what I’m saying is, is it programmable. Cheers, Phil
      Phil / 27th September 2023

      That is recommended for the bigfoot only , we would suggest this as a more universal alternative FMSREF001

      Steve @ Wheelspin Models
      What wind speed is this rated for?
      Gaz / 26th September 2023

      This information is not supplied by the manufacturers as this is designed for the bigfoot which is quite a slow plane.

      Steve @ Wheelspin Models
      Can this be used with helicopters
      Stuart / 27th July 2023

      This could possibly work but the system programmed for separate Arrows models, it is very basic and does not have channel reverse, the chances of it being set up correctly for a heli is remote. We would not recommend this for heli's.

      Steve @ Wheelspin Models
      Will the 6 axis flight controller work with just throttle rudder and elevator servos i.e. three channel control
      Spencer / 25th June 2023

      yes this would work just having the Rudder and elevator plugged in .

      Si @ Wheelspin Models
      thanks for clarifying Steve. (see below) so is this gyro Spectrum compatible with a standard RX please ? Yes this will work with Spektrum but we would recommend using the spektrum reciever with the AS3X in it SPMAR637T Answered by: Si @ Wheelspin Models
      Andy / 28th April 2023

      yes that will work fine with a standard none as3x safe receiver.

      Steve @ Wheelspin Models
      Hi. if the SPMAR637T has built in AS3X why would you need the Vector 6 please ?
      Andy / 28th April 2023

      You would use one or the other , 2 gyros would work against each other.

      Steve @ Wheelspin Models
      Hi, is this vector 6 Spektrum compatible please?
      Andy / 5th April 2023

      Yes this will work with Spektrum but we would recommend using the spektrum reciever with the AS3X in it SPMAR637T

      Si @ Wheelspin Models
      ASK A QUESTION
      Usually a few e-mails per month. We don't spam.
      Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

      For more in depth queries, please contact us.