This item is also listed in the following categories:
Everything you need to get your shiny new electric model out on the road!
1 x Voltz 1800mAh NiMh Stick Pack - 7.2v #VZ0010 | |
1 x Tamiya NiMh/NiCd Trickle Charger - UK Plug #HC-ACS48T |
saving you £3.45 over RRP!
Fastrax Roto Start (with Hyper 21 Plate)
Start your nitro R/C engine effortlessly using this new Roto Start with powerful 550 motor. Insert the 6mm shaft with hexball tip into the new Torque-Slip design backplate receptacle to start your engine. The torque slip back platefeatures a specially design 'slip' unit to avoid possible damage should the engine lock up.
Please Note: This item is not compatible with the new HoBao Cops design of pull-start engines.
Tech Note: Starting any engine should be done in short, sharp bursts. These are NOT designed to be "held on" for more than 15+ seconds at a time - doing so will cause heat build up and gear damage.
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
I bought it for my hobao hyper 7 tq sport. Very good product and exactly as described.
Great product from Fastrax once again, makes starting my Hyper .21 a breeze! Would highly recommend.
Very good quality +++
I'm afraid not, sorry. It will only work on the Hobao/Mac Hyper 21/28 engines.
Answered by: Ben @ Wheelspin Models
Yes, this should fit your Hyper 7 TQ 21.
Answered by: Ben @ Wheelspin Models
I'm afraid we don't sell Hong Nor, so can't be 100% certain, but I'd assume it's a no as the Hyper .21 and .28 are quite a specific fitment.
You mention Force, if your engine uses a Force .28 pullstart, you may find the HPI F series rotostart HPI-87130 may fit.
Answered by: Ben @ Wheelspin Models
Answered by: Ben @ Wheelspin Models
The backplate is not sold separately, sorry.
Answered by: Ben @ Wheelspin Models
This won't fit thunder tiger engines sorry
Answered by: Ben @ Wheelspin Models
Yes, the backplate is included
Answered by: Ben @ Wheelspin Models
Yes, that will fit the Hyper SS.
Answered by: Ben @ Wheelspin Models
Answered by: Ben @ Wheelspin Models
No, this will not fit the Hobao .30 with COPS starter system.
Answered by: Ben @ Wheelspin Models
Yes, if you have the Hyper 21 or 28 engine this should fit.
Answered by: Ben @ Wheelspin Models
It will bolt on as the bolt pattern is the same, but will not work on a COPS engine sorry.
Answered by: Ben @ Wheelspin Models
No, this will only fit Hobao.
There is a version FT02623F which is listed for SH engines, but please be aware there are many different variants - so we couldn't advise if it would fit your application.
Answered by: Ben @ Wheelspin Models
No. You can use any 7.2v NiMh stick pack such as those shown in our combo package - VZ0014 and charger HC-C606014
Answered by: Ben @ Wheelspin Models
No, it's designed solely for Hyper 21/28 engines.
Answered by: Ben @ Wheelspin Models
I don't believe so, only the Hobao Hyper 21 or 28
Answered by: Ben @ Wheelspin Models
Thanks for the info...!
Answered by: Ben @ Wheelspin Models
Yes, this will work on your Hyper 7.
Answered by: Ben @ Wheelspin Models
Not if it is a cops engine, which all have been since late 2016
Answered by: Ben @ Wheelspin Models
No will not work with a cops, only a starter box for this engine if you wish to move away from the pull start
Answered by: Ben @ Wheelspin Models
Yes we ship worldwide, to see shipping costs simply add the item to your basket and choose your country from the drop down list on the "view cart" page.
Answered by: Ben @ Wheelspin Models
No, sorry
Answered by: Ben @ Wheelspin Models
No this does not include battery or charger but we do list them in our combo pack
Answered by: Ben @ Wheelspin Models
No it won't fit that
Answered by: Ben @ Wheelspin Models
Spare backplates are FT02624-11
Answered by: Ben @ Wheelspin Models
Yes provided it does not have the COPS system
Answered by: Ben @ Wheelspin Models
Doubtful sorry
Answered by: Ben @ Wheelspin Models
If it's the later COPS version (green pullstart handle) then I'm afraid these won't fit sorry
Answered by: Ben @ Wheelspin Models
Not that I know to sorry
Answered by: Ben @ Wheelspin Models
No it won't you need one for the Force engines. Please call the store and one of the team will advise you.
Answered by: Anthony @ Wheelspin Models
Yes this will fit for you.
Answered by: Si @ Wheelspin Models
This will take a standard 7.2v NiMh battery, something like this HPI-160152
Answered by: Si @ Wheelspin Models
This is not compatable with the new Hyper engines with the cops pull start, if your car has a green handel for the pull start then it will not work.
Answered by: Si @ Wheelspin Models
No that is for hobao engines only , we do not know of one that will fit the dynamite engine.
Answered by: Steve @ Wheelspin Models
It is not designed for that engine so we cannot recommend it.
Answered by: Steve @ Wheelspin Models
Only if it is not a COPS engine (which says cops on the pullstart and the pullstart has a green handle)
This will not fit a Hobao COPS engine.
Answered by: Steve @ Wheelspin Models
No that will not fit , there is not a roto start for that engine and they suggest using a starter box.
Answered by: Steve @ Wheelspin Models