This item is also listed in the following categories:
Weight | 255g | 8.99oz |
Shipping Weight | 0.48kg | 1.05lbs |
Product Height | 47mm | 1.85in |
Product Width | 78mm | 3.07in |
Product Length | 145mm | 5.71in |
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
good product for little money.
i've got to say this is a great charger, it feels solid and well built, the loud beeps when it starts and stops charging is nice too, come with more than enough adapters too!
Not that we know to as yet, sorry.
Answered by: Ben @ Wheelspin Models
At 3A, would take around 45-55 mins
Answered by: Ben @ Wheelspin Models
Yes, they indicate when charged
Answered by: Ben @ Wheelspin Models
Set it to 2A and it will charge in just under an hour
Answered by: Ben @ Wheelspin Models
You'd need both leads in to charge
Answered by: Ben @ Wheelspin Models
They are 50W total power output
They will detect what voltage battery you have connected
Answered by: Ben @ Wheelspin Models
Yes, if your battery supports charging at that rate (most do not...)
Answered by: Ben @ Wheelspin Models
Yes, you can adjust the charge rate between 0.1 - 5.0A
Answered by: Ben @ Wheelspin Models
Yes, that would charge that fine with a suitable connector on the battery
Answered by: Ben @ Wheelspin Models
Yes, with a CLEC5 adapter
Answered by: Ben @ Wheelspin Models
In theory, yes - but I wouldn't recommend it.
Answered by: Ben @ Wheelspin Models
No sorry you will need , this charger : ET0225
Answered by: Anthony @ Wheelspin Models
That depends on the capacity of the 3S pack.
For a 3000mah, charge at 3A, for 5000, charge at 5A, etc
Answered by: Ben @ Wheelspin Models
It will yes but with the charger being a 5.0a charger it will be running at full power with a 5000 Mah battery.
Answered by: Anthony @ Wheelspin Models
No this does come with a croc type clip for a direct battery connection.
Answered by: Anthony @ Wheelspin Models
Yes this will charge NimH batteries, you would choose the NimH setting then set the amps depending on the Mah of your battery
lets say 3000Mah so divide by 1000 = 3 so charger to be set at 3amps
Answered by: Si @ Wheelspin Models
This would work yes, as long as the batteries have the correct connector. However due to the Wattage Of the charger it would take a while to charge the 6s battery.
This would be a better option for you ET0202
Answered by: Si @ Wheelspin Models