Looking for a step up from the basic package? Why not take a larger capacity battery coupled with a fast charger.
1 x Ansmann Tamiya AC/DC Delta 3 Fast NiMh Charger #HC-AC3001 | |
1 x EP Super Duty 3000mAh NiMh Stick Pack - 7.2v - Tamiya Connector #SCH-EP3000S |
saving you £8.30 over RRP!
Fastrax Roto Start (with Force/SH Plate)
Start your nitro R/C engine effortlessly using this new Roto Start with powerful 550 motor. Insert the 6mm shaft with hexball tip into the new Torque-Slip design backplate receptacle to start your engine. The torque slip back plate features a specially design 'slip' unit to avoid possible damage should the engine lock up.
Fits 12mm hex one way bearing and features 27mm hole spacings
Tech Note: Starting any engine should be done in short, sharp bursts. These are NOT designed to be "held on" for more than 15+ seconds at a time - doing so will cause heat build up and gear damage.
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
Good service excellent quality
I believe it's for the larger SH engines only.
Answered by: Ben @ Wheelspin Models
Yes it should do.
Answered by: Ben @ Wheelspin Models
Yes, this includes backplate and the hand unit.
Answered by: Ben @ Wheelspin Models
I believe so, but we're not 100% sure as we don't sell that engine.
Answered by: Ben @ Wheelspin Models
Doubtful, unless it has a retro-fitted Force engine.
Answered by: Ben @ Wheelspin Models
Hmm, it's doubtful - it will only fit Force engines.
Answered by: Ben @ Wheelspin Models
We don't have that engine here to try - however it's very doubtful.
Answered by: Ben @ Wheelspin Models
This is listed as fitting SH engines, so whilst we haven't tried it ourselves, we believe so yes.
Answered by: Ben @ Wheelspin Models
No, you'd want the Hobao version FT02623H
Answered by: Ben @ Wheelspin Models
No, the Hellfire had a K series engine so needs HPI Roto start HPI-87148
Answered by: Ben @ Wheelspin Models
No, this won't fit the Schumacher
Answered by: Ben @ Wheelspin Models
Yes it should fit.
Answered by: Ben @ Wheelspin Models
It will, but there is work to be done to make it work.
It will bolt onto the engine with no issues at all, but, the backplate hits the chassis, so the engine has to be shimmed up around 2mm, not a job for a novice, bit it is achievable
Answered by: Ben @ Wheelspin Models
It's unlikely to fit, sorry.
Answered by: Ben @ Wheelspin Models
It's unlikley to fit that sorry.
Answered by: Ben @ Wheelspin Models
Force .46 isn't one we've tried... If it's a Force 4.6 (4.6cc) then that should fit based on our experience.
Answered by: Ben @ Wheelspin Models
No it won't sorry
Answered by: Ben @ Wheelspin Models
Now added an image to show the dimensions on this :-)
Answered by: Ben @ Wheelspin Models
If you have the G3.0 engine then yes I believe this will fit
Answered by: Ben @ Wheelspin Models
It will fit Force/SH engines.... If you truck has one of those with the dimensions listed - it should fit.
Answered by: Ben @ Wheelspin Models
Afraid there's nothing that I know to that will fit that.
You would be better looking at a starter box such as FAST555
Answered by: Ben @ Wheelspin Models
Sorry but no we don't have one
Answered by: Ben @ Wheelspin Models
Possibly - dimensions are as shown in the image at https://wheelspin.s3.eu-west-2.amazonaws.com/img/FT02623F-a1f2.jpg
Answered by: Ben @ Wheelspin Models
I can't confirm as we don't sell that model - but please check dimensions shown in our image at https://wheelspin.s3.eu-west-2.amazonaws.com/img/FT02623F-a1f2.jpg
Answered by: Ben @ Wheelspin Models
No, but the FT02623H will work (if you have non COPS engine)
Answered by: Ben @ Wheelspin Models
No.
FAST565 can fit the Carnage with some modifications... So might fit the Torro, however - it's not something anyone here has tried or would recommend. We would therefore ere on the side of caution and say that they're not compatible.
Answered by: Ben @ Wheelspin Models
No, sorry
Answered by: Ben @ Wheelspin Models
Yes, if you have a 12mm hex and an F series engine
Answered by: Ben @ Wheelspin Models
Afraid not 100% sure on that - please check the dimensions listed at
Answered by: Ben @ Wheelspin Models
I don't think so sorry
Answered by: Ben @ Wheelspin Models
Not a model we sell - so I'm really not able to advise sorry
Answered by: Ben @ Wheelspin Models
Yes it is.
Answered by: Steve W @ Wheelspin Models
Yes it will fit.
Answered by: Steve W @ Wheelspin Models
It will not fit straight away and would require modifications so it is not something we recommend.
Answered by: Steve @ Wheelspin Models
Yes, this will work as long as you have an SH engine.
Answered by: Si @ Wheelspin Models
Yes this should work on that engine
Answered by: Si @ Wheelspin Models
This will use a standard 7.2 Nimh pack something like this VZ0010
Answered by: Si @ Wheelspin Models
You will need a 7.2v Nimh battery - we list a combo on our page that you can use for this.
Answered by: Rich @ Wheelspin Models