The convenience and performance of brushless technology is available for everyone with the Photon Sensorless Weatherproof System from Etronix. Simple to set-up and with a range of sensible KV rated motors for most r/c car applications and abilities the Photon is the ideal brushless start-up package or upgrade from a stock brushed set-up. An ideal choice for any 1/10th buggy, truggy, short course or truck application.
With the supplied programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs.
When choosing your new ESC/ESC and motor combo, please take note of the relevant motor and battery cell count limits.
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
No battery connection included.
The motor comes with connections fitted, the other half are included but not fitted so the customer can shorten motor wires and then solder on connections
Answered by: Ben @ Wheelspin Models
It'd be OK on 2S, but 3S would be too much.
Answered by: Ben @ Wheelspin Models
It will fit in that car no problem, but we'd recommend a 2S maximum.
Answered by: Ben @ Wheelspin Models
It'll fit - but is a bit underpowered for a truck of that weight.
A better choice would be say ET0425
Answered by: Ben @ Wheelspin Models
These come with deans connected.
Answered by: Anthony @ Wheelspin Models
It's a bit underpowered to be honest for a truck of that size.
Answered by: Ben @ Wheelspin Models
We don't sell HSP so I can't advise 100% - but this is a basic combo, you would want to stick to 2S maximum.
Answered by: Ben @ Wheelspin Models
Yes as a blitzer beetle uses a 540 size motor
Answered by: Anthony @ Wheelspin Models
It's a basic system but yes it would fit and run in that.
Pinion - I'd see how you get on but you will likely need to run a smaller one
Answered by: Ben @ Wheelspin Models
9.0R = 4350kv
Answered by: Ben @ Wheelspin Models
It's a bit underpowered for the Slash
Answered by: Ben @ Wheelspin Models
This is a bit underpowered for a bullet. Take a look at say HW38010203 or HW38010200
Answered by: Ben @ Wheelspin Models
Yes it would fit a TT01
Answered by: Ben @ Wheelspin Models
Sure, no reason why you cannot do that
Answered by: Ben @ Wheelspin Models
We don't sell HSP, so it's a bit hard to advise. This is a higher KV than your current system - but just bear in mind it is only a 45A ESC. It may be a touch quicker, but if you're after more speed I would look at a higher spec system eg say HW38010204
Answered by: Ben @ Wheelspin Models
Yes it will, just keep an eye on the motor temps then if it gets too hot then add a 1/10 size heatsink and fan.
Answered by: Anthony @ Wheelspin Models
Its will work but we would highly recommend this system which has more torque and can run on 2s or 3s lipo ,the one you linked will only run on 2s lipo .
wheelspinmodels.co.uk/i/300322/
Answered by: Steve W @ Wheelspin Models
Yes this is a standard 3.2mm shaft.
Answered by: Si @ Wheelspin Models