Absima ASB1 Sand Buggy Brushless

Absima ASB1 Sand Buggy Brushless

Brand: Absima

Part Number: AB-12212

£219.00 Web Price RRP £244.78

In stock: Usually ships same day

Request Price Match

LiPo batteries are the latest craze to hit the RC scene and provide approximately 20% more runtime and power than comparable NiCd/NiMh batteries.

1 x Voltz 5000mAh Hard Case LiPo - 7.4V 2S 50C - Deans #VZ0317
1 x Radient Mistral LED LiPo/NiMH 5A Charger #RDNA0465

saving you £33.83 over RRP!

Upgrade to a higher performance battery pack and charger with this pro spec combo

1 x Kyosho Peak Hard Case LiPo - 5000mAh 7.4V 2S 45C - Deans #PEK00545
1 x eTronix Powerpal 3.0 AC/DC Performance Charger/Discharger - 80W 10A #ET0202

saving you £37.15 over RRP!

Show Spares and Option Parts

Absima presents our new 4WD 1:10 Sandy Buggy, based on the existing proven design of the AB1 the ASB1…finally you get what you want, a high quality and robust model for beginners and street bashers. The extremely robust construction of the AB1 chassis makes the car handle the rough and tumble it deserves. The upper deck, shock towers are made ​​of aluminium for extra strength, all plastic parts are made with extra strong flexible material. The reliable 4WD drivetrain make the ASB1 suitable for all terrains. A water resistant 45A ESC (LiPo & NiMH Compatible) and a 540 size 3421 KV brushless motor gives you extra power to be in front of the rest with speeds up to 60 KM/H.  The ASB1 also has the extra protection of the dirt  cover to protect the electronics and battery pack. Also included is a water resistant steering servo for extra protection against those damp conditions!

Absima ASB1 Sand Buggy Brushless Features:

  • Ready to Run 
  • 4 wheel drive
  • Ball raced transmission
  • Adjustable oil filled shocks
  • CVD steel drive shafts
  • Powerful 3421KV Brushless motor
  • Water resistant speed controller with Deans connector
  • Water resistant steering servo
  • 2.4Ghz CR2s V2 radio system
  • Gear differentials front & rear
  • Aluminium engine mount
  • Completely covered transmission
  • Adjustable turnbuckles
  • Aluminium upper deck
  • Aluminium shock towers front & rear
  • Servo saver
  • Fully finished painted body

Absima ASB1 Sand Buggy Brushless Tech Spec:

  • Length: 425mm
  • Width: 285mm
  • Height: 150mm
  • Weight: 1595g
  • Wheelbase: 293mm
  • Chassis clearance: 40mm
  • Speed: +60 KM/H

Required to complete: 7.4V 2s LiPo or 7.2V NiMH Battery pack and suitable charger. 4 X AA Batteries required for the transmitter

  • Brand: Absima
  • Part No: AB-12212
  • Scale: 1:10
  • Build Level: Assembled (RTR)
  • Vehicle Type: Buggy
  • Power Source: Electric - Brushless
  • Surface Type: Off Road

Free UK Delivery!

This item is over £100, so qualifies for free standard UK shipping!

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No reviews yet!
Can you drive this fully under water e.g. in a puddle?
Asked by Linus Kerkham on 28th August 2017

No - submerging is not recommended.

The occasional splash through a wet puddle, car park, etc would be fine.

Answered by: Ben @ Wheelspin Models

If I buy online and you have the item in stock could I collect in store?
Asked by Wayne Cannon on 16th October 2017

You are welcome to buy instore - but we would need to take payment instore. We can't accept payment online for collection instore.

Answered by: Ben @ Wheelspin Models

Please can you tell me the run time of the Voltz 2500mAh Hard Case LiPo - 7.4V 30C - Deans battery in this car please
Asked by Jeremy on 25th October 2017

That's a basic LiPo, so we'd estimate around 15 mins, depending on your driving style.  For comparison a 5000mah LiPo would give around 25-30 mins runtime.

Answered by: Ben @ Wheelspin Models

Can this be used with a 3 cell battery
Asked by James on 28th November 2017

Recommended maximum is 2S.

Answered by: Ben @ Wheelspin Models

Whats the top speed out of the box and how long does the included battery last?
Asked by Aston on 11th March 2018

Top speed would be around 40mph or so on a 2S LiPo battery.  A battery isn't included, but a 4000mah pack would give around 20-25 mins runtime, depending on your driving style

Answered by: Ben @ Wheelspin Models

Can you run this modle on 3s with standered stock motor and esc
Asked by Andrew on 1st April 2018

No, 2S is the recommended maximum

Answered by: Ben @ Wheelspin Models

could i use a 11.1 volt battery on this
Asked by Fenton Birch on 7th September 2018

It's 2S recommended maximum

Answered by: Ben @ Wheelspin Models

Hi does the Anbisma sand buggy come with the raqdio controller i wanted a twin stick not a wheel type. Is this in the pack or sold seperately
Asked by Mark Fuller on 2nd January 2019

Yes, this is RTR with the transmitter included.

It's a pistol type radio. You could change for a stick system if you wanted - you'd just need to change the transmitter and receiver for something like AB-2000021


Answered by: Ben @ Wheelspin Models

Are batteries included
Asked by Adam Bullock on 14th March 2020

No, this does not include batteries

Answered by: Ben @ Wheelspin Models

Is this compatible with 3s?
Asked by Antony Sloan on 10th April 2020

No, 2S max

Answered by: Ben @ Wheelspin Models

Do these come with a controller handset too?
Asked by Mark Todd on 4th December 2020

Yes these include a transmitter

Answered by: Ben @ Wheelspin Models

hi can i run this car on 3s lipo
Asked by Paul on 12th January 2021

2S is the recommended max on these

Answered by: Ben @ Wheelspin Models

What battery and charger dose the Absma ASB1 Sand buggy come with as standard?
Asked by Dave on 7th March 2021

These do not come with battery/charger

Answered by: Ben @ Wheelspin Models

Ask a Question Write a Review