The amazing "Intergalactic" version of Ken Block's latest Ford Fiesta ST RX43 racer is now available in a 1/8th scale WR8 Flux version! HPI Flux power is able to propel Ken's replica from a standing start into wild racing action and 60+ mph (100+km/h) with a simple pull of the trigger, so it's the perfect way to copy Ken's epic performances with your friends!
Underneath the replica Ken Block Ford Fiesta ST RX43 body, the WR8 Flux chassis is based on the HPI Bullet RC monster truck, which means it's massively tough and can take a real beating on- or off-road! The WR8 Flux is powered by a massive 4000KV brushless motor and waterproof 3S-capable speed controller, delivering power through the same tough bevel gear differentials and fully ball bearing-supported 4WD shaft drivetrain of the Bullet monster truck. Combine this with WR8 rally-style suspension geometry, custom-designed shock towers and dampers and extra-thick sway bars for extra control! Top it off with semi-slick tarmac tires and replica fifteen52 TurboMac and Turbo-Fan wheels and you've got an instant head-turner in your hands!
The WR8 is crammed with awesome features that enhance its durability anywhere you want to take it, including a high ground clearance, skidplate, foam front bumper, optimized rally-style suspension geometry, shock debris guards, mud deflectors on the chassis and much more. It's the ideal machine to race your friends on Gymkhana-style courses and multi-surface tracks, or anywhere you like!
Like all HPI Racing RTR (Ready-To-Run) cars, the WR8 Flux is completely pre-built: all you have to do is open the box, install the batteries and you are ready for awesome stunt action! 4 AA alkaline HPI Plazma batteries are included for the transmitter, all you have to provide is a 2S or 3S LiPo battery for the car, plus a LiPo charger.
Nitro & Micro versions also available
Easy To Drive!
The HPI WR8 FLUX is super-easy to drive and get familiar with – all you have to do is install a battery, plug it in and switch on the radio and car. It’s that easy! To drive the car, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - hold it there to go into reverse. It takes seconds to get used to this easy operation, and in no time at all you’ll be ripping off jaw-dropping moves, just like Ken Block in his head-to-head races!
Replica fifteen52 Wheels and Real Rubber Tires
For the ultimate in replica looks and fantastic performance, every HPI WR8 with Ken Block’s Ford Fiesta ST RX43 body is fitted with replica fifteen52 Turbomac wheels in a matching wild color scheme. The wheels really help the car stand out as a scale replica, and for extreme performance, the wheels are wrapped with semi-slick HPI tires molded in real rubber. The grippy rubber compound helps the car stick to asphalt or tarmac for real racing action, and the treaded design gives you plenty of grip even on dusty paved surfaces!
Suspension Just Like Ken’s Full-Size Car!
Fans of racing cars, from real ones to little ones, know that to get the best out of your car you need to have a sturdy, tuneable suspension system. That’s why the HPI WR8 uses double wishbone suspension at all four corners, fitted with real coil over oil-filled shock absorbers and thick sway bars front and rear, just like real racing cars! Thick main suspension arms are mated to durable uprights fitted with a pair of rubber-sealed ball bearings for performance that matches Ken’s Ford Fiesta ST RX43.
Full Adjustability Just Like The Real Thing!
All this function is nothing if you can’t customize the car to your liking. Although we’ve set the car to be just about perfect right out of the box, you can easily adjust loads of settings, exactly like a real racing car! Ride height, shock angle and more are simple to adjust if you want to dive under the hood – HPI make it easy to be your own race car mechanic AND driver! Drive like Ken, or work on his car: it’s easy to do both with the Ken Block WR8 FLUX!
FLUX VEKTOR 4000KV MOTOR
The FLUX VEKTOR 4000KV motor delivers massive power - plenty of juice for instant acceleration and enough power to pull out of just about any sideways drift. Option pinion gears are available to fine-tune the speed and torque delivery! The brushless design assures maximum performance with nearly no maintenance required.
FLUX VAPOR PRO SPEED CONTROLLER
With the capacity to handle 2S and 3S LiPo power, the FLUX VAPOR Pro electronic speed control is able to handle the latest, most powerful batteries you can fit in the WR8 FLUX. The VAPOR Pro features an integrated cooling fan to keep it cool in warm conditions, reverse so you can back out of jams with ease, and for maximum adjustability it's fully programmable with our optional #100573 USB Programming Kit.
The WR8 is super easy to upgrade to make it faster, more responsive, even cooler-looking, tougher and more durable. Swap the wheels for different styles and colors, change the tires for gravel or other off-road surfaces, add alloy braces and suspension parts, lower the weight with woven graphite options and beef up the drivetrain with hardened steel parts - the choice is yours!
There's no getting around it: this is an amazingly detailed replica of Ken Block's Ford Fiesta ST RX43! From the front splitter to the rear wing, and from the roof air intake to the amazing fifteen52 Turbomac wheels, this car looks like the real thing! Every detail of Ken’s real car is replicated in 1/8th scale, from the grilles and headlights to the double-level rear wing and spoiler. If you want to drive like Ken, you’ve got to have his car, and HPI have the only authorized RC replica of Ken’s Ford Fiesta ST RX43 car!
Tire Diameter: 80mm
Drivetrain: Full-Time Shaft 4WD
WHAT YOU NEED:
Ford Motor Company Trademarks and Trade Dress used
license to HPI RACING.
All commercial and publicity rights to use or market the name 'Ken Block'
and '43 Racing, LLC' is licensed exclusively through Wasserman Media Group, LLC.
Specification may be subject to change
This item is over £100, so qualifies for free standard UK shipping!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
This car (along with pretty much every RTR these days) is only supplied with a steerwheel type radio. However, you could change over by simply changing to a different Transmitter and Receiver.
Answered by: Ben @ Wheelspin Models
This is the brushless version.
Answered by: Ben @ Wheelspin Models