Features Current servos have the appearance of high speed and high power from the response of 2.4GHz and the power from Li-po batteries respectively. This creates a huge demand upon the servo. The RSx is the racing servo with the durability and operability to employ this high-spec demand. HCS (High
FeaturesCurrent servos have the appearance of high speed and high power from the response of 2.4GHz and the power from Li-po batteries respectively. This creates a huge demand upon the servo. The RSx is the racing servo with the durability and operability to employ this high-spec demand.
HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos is changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers.
If you want to use servos by HCS, please use with HCS compatible receivers.
RSx3 series is equipped with a Coreless motor.The RSx3-one10 Response provides a smooth operating feeling by the use of a Coreless motor.
A smooth cornering characteristic is provided.
Installed preset settingsThe following factory MODEL settings are pre-installed.
You can chenge setting by Servo model selector.
Model1: Standard setting(All category)
2:Mild setting
3:Standard setting
4:Standard setting
5:Standard setting
*Model1 has been selected in factory setting.
Made in JapanThe RSx2-one10 series: all essential parts such as the case, the gear, the motor are made in Japan.
At the domestic factory the close inspections are executed through the delivery to secure “Thorough Made in Japan” product reliability.
ICS You can change servo's setting when you use our software" ICS Servo Manager".
Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
You can select value by grip situation for best setting servos.
Specifications<Speed type servo>
#Torque: 9.0Kg-cm Speed: 0.07sec/60deg(@7.4V)
#Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V)
#HCS Compatible
#Dimensions: 41×25.5×21mm (Low Profile)
#Weight: 51.0g
#Oprating voltage: 6.0 to 7.4V (Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#Core-less Motor
#Dual bearings
#Hard servo gear shaft
#The aluminum heat sink middle case
#Gold plated connector
#Black cable
#Recommend category
1/10 EP On road, 1/10 GP On road, 1/10 EP Off road.
*Please use to steering control.