RC4WD D44 Plastic Complete Rear Axle

RC4WD D44 Plastic Complete Rear Axle
Specifications:

• Durable Injection Molded Black Nylon
• Clockable C's
  
• Removable Diff Cover
• Engineered and Manufactured by RC4WD
• Heavy Duty Bevel Gear Set 38T/13T
• 12mm Steel Wheel Hex
• 5mm Axle Output Shaft
• Weight: 5.55oz / 157g

Shown installed with Axial SCX10 Jeep Rubicon and Rok Lox 1.9" Comp Tires (Z-T0093) for example (Not Included)
Shown installed with Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 Jeep (Z-S1338), Axial SCX10 Jeep Rubicon, D44 Link Set for SCX 10CMS(SCX10 Width) (Z-S1072), Chassis Mounted Steering Servo Kit with Panhard Bar for Axial SCX10 (Z-S0923) and RC4WD Jeep JK Rampage Recovery Bumper to fit Axial SCX10 Chassis (Z-S0434) for example (Not Included)
What's Included:

• 1x RC4WD D44 Plastic Complete Rear Axle

Optional Parts:

• D44 Rear Axle Upper Link Mount (Black) (Z-S0971)
• D44 Rear Axle Upper Link Mount (Gun Metal) (Z-S0972)
• RC4WD Ballistic Fabrications D44 Axle Cover (Z-S1600)
• RC4WD ARB Diff Cover for D44 Axle (Z-S1607)
• D44 Aluminum Diff Cover (Silver) (Z-S1745)
• Differential Gear Set for D44 and Axial Axles (Z-G0079)
• Heavy Duty Bevel Gear Set 36T/14T (Z-G0080)

Replacement Parts:

• D44 Plastic Rear Axle Replacement Parts (Z-A0120)
• RC4WD 12mm Axle Wheel Hexes (Z-S0239)
• Heavy Duty Bevel Gear Set 38T/13T (Z-G0071)
• Heavy Duty Differential Locker (Z-S1682)
• Aluminum Diff Case for D44 and Axial Axles (Z-S1683)
• RC4WD Assembly Combo Pack (Oil, Thread Lock, Grease) (Z-S1732)
  

Replacement Hardware:

• 2x M4 Lock Nuts (Z-S0620)
• 2x Metal Shield Bearing 5x10x4mm (Z-S0686)
• 2x Metal Shield Bearing 5x11x4mm (Z-S0683)
• 2x Metal Shield Bearing 10x15x4mm (Z-S0837)
• 2x Metal Shield Bearing 6x10x3mm (Z-S0680)
• 2x Nylock Nuts M4 (Z-S1265)
• 4x Steel Socket Head Cap Screw M1.6 X 6mm (Z-S1236)
• 1x M4 E-clip (Z-S0919)
• 4x Button Head Self Tapping Screws M3 X 5mm (Z-S1689)
• 4x Socket Head Self Tapping Screws M2 X 6mm (Z-S1584)
• 2x Button Head Self Tapping Screws M3 X 10mm (Z-S1578)
• 1x Flat Head Self Tapping Screws M3 X 14mm (Z-S1704)

Notes:

• Fits Axial Jeep Wrangler Rubicon SCX10. But you will need Z-A0104.
• Some components may come preassembled. Our assembly team works hard to provide you the best product possible, but it is always a good idea to ensure all hardware is tight and add additional grease to the gears as needed.
• The XVD unit allows for a large amount of steering. In order to prevent premature failure, it's recommended that you set your radio's steering EPA to limit the steering from being maxed out.
  

This product has been tested and approved by the Recon G6. It is Recon G6 Certified.