Hobbywing Xerun AXE V1.1 ESC Combo With 2300Kv FOC Motor

Hobbywing Xerun AXE V1.1 ESC Combo With 2300Kv FOC Motor

Brand: Hobbywing

Part Number: HW38020253


SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.


Why not contact our team to see if an alternative is available?






HOBBYWING XERUN AXE 540-2300KV FOC SENSORED B/LESS V1.1 COMBOFeatures

  • Word's First FOC brushless system for Rock Crawler, Field-Oriented Control for Super Linearity, High Torque and Extreme Silence.
  • Polarity Protection:  Yes, it is not a typo! No more "oops" moments.
  • The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals indicating the rotor position.
  • The waterproof and dust-proof design (*IP67 standards) allows the AXE brushless power system to be used in all weather & track conditions without any issue of damage caused to the system from water or dust. Damage to the vehicle caused by water, mud, or conditions should be monitored closely when running in muddy, wet, or adverse conditions.
  • Intelligent torque output and  speed closed-loop control for easy control, and consistent motor RPM under all loads.
  • The adjustable drag brake and drag brake rate control with the maximum drag brake of up to 200% (that’s near twice the drag brake of standard brushless power systems) can provide
  • unprecedented parking capacity on slopes, with no jerky stops.
  • The innovative built-in Bluetooth connectivity. allows users to read ESC data or update ESC firmware via a smartphone (installed with the HW LINK app).
  • The motor with 4 poles and 12 magnets, featuring Hobbywing’s “staggered pole” patent has zero cogging effect and torque ripple. It can work smoothly at low speeds. This greatly improves
  • the maneuverability of rock crawlers at low speeds.
  • The new sensor harness, which features the plug-and-screw design, has a silicone O ring inside. The new design and O ring not only provides a firm connection between motor and ESC but solves the “waterproof” challenge for sensor ports.
  • Advanced and secure electronic switch features a waterproof, dust-proof and shock-resistant design.
  • Multiple protections: low-voltage cutoff, thermal, fail-safe (throttle signal loss), motor lock-up, and overcurrent.

Important: Xerun AXE series is a close-system: Due to its advanced technology, HOBBYWING Xerun AXE ESC works exclusively with Xerun AXE brushless motor. 

 

Two Simple UK Delivery Options

Royal mail at £3.95, or Express at £6.95.

Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

Does this come with the wires and connectors already soldered or do you sell them separately?
Asked by Ryan Vince on 26th May 2020

No they are loose individual components, so you would normally cut the wires to length and solder yourself.

Answered by: Ben @ Wheelspin Models

Hi can you tell what battery this can take I’m running 3s 11.1v? Also will this fit in my trx4? and would it be more powerful than the standard motor?
Asked by Lee on 20th July 2020

This will work with an 11.1 lipo , yes alot more powerful than the standard unit.

Answered by: Anthony @ Wheelspin Models

Will this fit in my rc4wd tf2? will it work better than my stock brushed combo? Will I also have to change gearing?
Asked by Joe on 21st September 2020

Yes, that will fit and should give a great performance boost over brushed.

Gearing is quite subjective - we'd normally stick with the stock gearing and see how you get on, you can always modify later.

Answered by: Ben @ Wheelspin Models

Will this fit the Axial SCX iii Jeep builders kit?
Asked by Andyb on 22nd December 2020

Yes that should fit

Answered by: Ben @ Wheelspin Models

Hi, please could you assist? Would the Xeron AXE brushless Combo for crawlers connect up to my stick Futaba T4GRS controller with the Futba receiver okay ? FYI: Building up the GMade buffalo. Many thanks simon
Asked by Simon Morath on 22nd January 2021

Yes that would work with any receiver - should be fine in your setup

Answered by: Ben @ Wheelspin Models

Ask a Question Write a Review