RC4WD Outcry Extreme Speed Controller ESC w/ Program Card RC4WD

Outcry Extreme Speed Controller ESC w/ Program Card
This new Outcry III Water-resistant ESC features great characteristics for scale trail driving, making it the perfect choice for any scale build!
Specifications:

• Input Voltage: 2-3S Lipo/5-9 Cells NiMH
• Built-in Powerful Switch-mode BEC
• BEC Output Voltage-Current: 6V / 7.4V @ 8A
• Cont. / Peak Current : 80A / 400A
• Applicable to All Weather Conditions 
• Multiple Protection Functions: Low Voltage Protection, Over-temperature Protection
• Recommended Motors: 540 /550 / 775 Motors
• Size: 1.96 x 1.68 x 1.04in / 50 x 42.9 x 26.5mm
• Program Card Working Voltage: 5.0V - 8.0V
• Program Card Size: 1.53 x 0.47 x 22.0in / 38.9 x 12.0 x 55.9mm
• Total Weight: 1.37oz / 110.5g
• Battery Plug: XT60

Shown installed on RC4WD Carbon Assault 1/10th Monster Truck w/ Manticore Lexan Body Set (Z-RTR0041) for example (Not Included)
What's Included:

• 1x Outcry Extreme Speed Controller ESC 
• 1x LED Program Card
• 1x XT60 Female to Tamiya Male Connector Adapter
  1x Extension Wire 150mm

Optional Parts:

• 540 Crawler Brushed Motor 80T (Z-E0001)
• 540 Crawler Brushed Motor 65T (Z-E0002)
• 540 Crawler Brushed Motor 55T (Z-E0003)
• 540 Crawler Brushed Motor 45T (Z-E0004)
• 540 Crawler Brushed Motor 35T (Z-E0005)
• RC4WD Brushed 45T Boost Rebuildable Crawler 540 Motor (Z-E0041)
• Brushed 35T Boost Rebuildable Crawler 540 Motor (Z-E0045)
• 540 Crawler Brushed Motor 20T (Z-E0065)
• 540 Crawler Brushed Motor 27T (Z-E0067)

Instruction Manuals:

• Click here to download.

Notes:

• Prior to proceeding, be sure to either remove the pinion from the motor or elevate the truck so the wheels are not able to touch the ground.
• Do not touch this product while in use to avoid injury. Product emits heat and thus, the heatsink may become extremely hot.
• This product is water-resistant. 
• Begin using your ESC by calibrating with your transmitter. We strongly recommend all users to use the “Fail Safe” function on the radio system and set (F/S) to “Output OFF” or “Neutral Position” . Example of calibrating Neutral range and Endpoint.