FMS 1400MM J3 CUB V4 w/FLOAT ARTF w/o TX/RX/BATT w/REFLEX

The Piper J-3 Cub is an American light aircraft that was built between 1937 and 1947 By the Piper Aircraft Company as an affordable trainer. The aircraft has a simple, lightweight design which gives it good low-speed handling properties and short-field performance. During the WWII, J-3 Cub was designated as L-4 Grasshopper, used extensively for reconnaissance, transporting supplies, artillery spotting duties and medical evacuation of wounded soldiers.

Like its full-sized counterpart, the all-new FMS 1400mm J-3 V4 has excellent short takeoff and landing (STOL) and slow speed handling characteristics. FMS has dedicated significant amount of resources in making this aircraft as detailed as possible- components such as the engine and landing gear, among many others, are replicated in loving detail. Something worth noting is that FMS has made scale floats for the Cub as a response to popular demand from the community.

To mix things up a little, FMS has selected an attractive, historically accurate red paint scheme for the V4 Cub. Not all J-3’s were yellow!

For pilots who are looking for an easy-to-fly, scale aircraft that has gentle trainer characteristics, plenty of power and graceful lines from the golden-age of flight- the 1400mm FMS J-3 V4 is all of that, and more.

FMS 1400mm (55.1") J-3 Cub V4 Features:

• Powerful 3536-850KV motor, Predator 40A ESC
• Highly detailed scale engine and landing gear
• Simple structure for quick assembly
• Durable EPO material
• Optional scale floats (included)

Spec Check:

• Wingspan 1400mm/55.1in
• Overall Length 900mm/ 35.4in
• Flying Weight 1320g/oz
• Motor Size 3536-KV850
• ESC 40A
• Servo 9g Servo x 4
• Radio 4 Channel
• CG (center of gravity) 55-65mm(From Leading Edge)
• Prop Size 11*7
• Recommended Battery 11.1V 2200mAh 3s 25C
• Battery Connector: XT-60
• Aileron Yes
• Elevator Yes
• Rudder Yes
• Flaps No
• Retracts No
• Approx. Flying Duration 5 min
• Minimum Age Recommendation 14+
• Experience Level Intermediate
• Recommended Environment Outdoor
• Assembly Time 45 minutes
• Material Durable EPO
• Package Options PNP
• Reflex System

Please Note: This kit requires the following for completion: 2.4Ghz Radio System, Battery and Chargers.

For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org