RC4WD TCI Heavy Duty R4 Single Speed Scale Transmission w/ O/U Drive Transfer Case RC4WD

RC4WD TCI Heavy Duty R4 Single Speed Scale Transmission w/ O/U Drive Transfer Case
Specifications:

• CNC Machined Billet Aluminum Transmission Case
• Cast Metal Transfer Case
• Single Speed
• Gear Ratio: 18.1 : 1
• 14T 48P Pinion Gear
• Output Shaft OD: 0.19in / 5mm
• Total Weight: 13.3oz / 379.5g

Gearing Options:

• 15T/22T (Stock) : 1 : 1.47 Gear Ratio - Front axle goes same speed as rear
• To change the gear ratio remove the cover on the side with the two shafts.
• The following are the gear combinations of Rear Output to Front Output:
• 17T / 19T combo = 1:1.27 front axle will rotate 27% faster than rear
• 16T / 20T combo = 1:1.33 front axle will rotate 33% faster than rear
• 19T / 17T combo = 1:1.42 front axle will rotate 42% faster than rear
• 20T / 17T combo = 1:1.57 front axle will rotate 57% faster than rear
• 20T / 16T combo = 1:1.67 front axle will rotate 67% faster than rear
• This Transmission combines the R4 scale transmission and the Over/Underdrive transfer case into 1 unit. Fully assembled this will come with zero overdrive.
• If you would like to change out the gears please see the instructions. You can swap the t-case gears in the same manner as the Z-U0039.

Shown installed on RC4WD Trail Finder 2 RTR BLAZER Chassis with RC4WD 1/10 V8 Scale Engine (Z-S1043) and Trail Finder 2 V8 Engine Mounts (Z-S1239) for example (Not Included)
Shown installed on RC4WD Trail Finder 2 RTR Chassis with Motor Mount for R4 Transmission (Z-S1627) for example (Not Included)
What's Included:

• 1x RC4WD TCI Heavy Duty R4 Single Speed Scale Transmission w/ O/U Drive Transfer Case
• 1x 14T 48P Pinion Gear
• 1x 36T / 20T 48P Gear
• 1x 16T Gear
• 1x 17T Gear
• 1x 19T Gear
• 1x 20T Gear
• 10x M2.5 x 5mm Socket Head Cap Screws (Z-S1207)
• 6x M3 x 6mm Steel Button Head Cap Screws
• 6x M3 x 8mm Steel Button Head Cap Screws
• 1x Metal Shield Bearing 5 x 11 x 4mm
• 1x Silver Transmission Guard
• 1x Black Transfer Case Mount

Replacement Hardware:

• Steel Socket Head Cap Screws M2 X 6mm (Z-S0611)
• Steel Socket Head Cap Screws M2 x 10mm (Z-S0849)
• Steel Socket Head Cap Screws M2 x 12mm
• Steel Socket Head Cap Screws M2 x 25mm
• Steel Button Head Cap Screws M3 x 6mm (Z-S0651)
• Steel Button Head Cap Screws M3 x 8mm (Z-S0652)
• Socket Head Cap Screws M2.5 x 5mm (Z-S1207)
• Metal Shield Bearing 5 x 11 x 4mm (Z-S0683)

Notes:

• Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Midnight Edition) (Z-RTR0054)
• Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030)
• Fits RC4WD Trail Finder 2 RTR w/Chevrolet Blazer Body Set (Limited Edition) (Z-RTR0035)
• Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-k0049)
• Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054)
• Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058)
• Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059)