3MM White LED Set (Pair) RC4WD

1/14�4X4�Overland RTR Truck w/Utility Bed
Payment Information: Due to the value of this product, the only forms of payment that will be accepted are Affirm and Bank Transfer. Please do not choose�Credit Card�or PayPal when checking out as we will cancel the order. Feel free to email us at <span class="__cf_email__" data-cfemail="1f6c6a6f6f706d6b5f6d7c2b687b317c7072">[email&iuml;&iquest;&frac12;protected]</span> if you have any questions.
Important Note: Due to the size and weight of this product, this product has to be shipped in its own container.� It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $160 to ship anywhere in the US and all international countries due to the size and weight.
Specifications:

• Hard Plastic European Style Front Cab
• Full Metal 2 Speed Transmission (Planetary Gears)
• Transfer Case (Billet Aluminum)
• Scale Fuel Tank (Billet Aluminum)
• Super Scaled Leaf Spring Suspension Setup
• Scale Rims (Billet Aluminum)
• Remote Lockable Front and Rear Axles (Locking Differential)
• Full Metal Front and Rear Axle Housing
• Steel Scale Drive Shaft
• Realistic Front Cab Latch
• LiPo Cutoff
• Molded Fuel Tank
• Rear Light Guards�
• Scale Light Buckets (Fits 3-5mm LED)
• Recommended Payload: 8.0kg / 17.6lbs
• Painted Body
• Scale Wheels and Tires
• Brushed Motor
• Length: 24.9in / 633mm
• Width: 9.05in / 230mm
• Height: 10.7in / 273mm (Including Antenna)
• Weight: 6.0kg / 13.2lbs
• Axle Gear Ratio: 2.6 : 1
• Maximum Load: 12kg / 26.4lbs
• First Gear 1:64, Second Gear 1:16 (Transmission)
• Basic 4 Channel 2.4Ghz Radio
• This Product Is Professionally Pre-assembled
• Manufactured by JDCustoms
• 30 Days Limited Warranty

\
What's Included:

• 1x 1/14 4X4 Overland RTR Truck w/Utility Bed
  

Required Parts:

• 5200mAh 11.1V 3S 25C LiPo Battery Pack with XT60 Plug (Battery Size: 5.59 x 1.77 x 1.57in / 142 x 45 x 40mm )
• 4x AA Batteries for Radio (Z-S1718)

Instruction Manuals:

• Click here to download.

Notes:

• Must turn on the transmitter before starting the ESC.
• ESC Supports XT60 Connector
• While some components may come assembled, it may be in your best interests to check the products to ensure all hardwares are tight. In some cases you may want to apply threadlock to some of the hardwares that were already installed.
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• Use threadlock sparingly.
• Do not over tighten screws, otherwise, you may strip the thread.
• Do not use more than 3S battery. (11.1 volt(s))
• This product is for experienced R/C users. Not recommended if you just started with R/C.