ProLine Menace HP 3.8 Belted Tyre On Raid Black 8x32 17mm Hex Wheels (2)

This is a pair of Menace HP 3.8" tires. Pro-Line Menace tires are 1:1 racing-inspired tread designed to give your 1/8 Monster Truck massive traction on your street, parking lot, or track.

The Menace HP tires are BELTED to handle extreme power and high speeds with ease. No tire ballooning here! Transform the handling of your truck with the low-profile carcass, deep grooves, and long-lasting compound, also great for speed runs! These tires and Raid 3.8" wheels have been developed from the ground up to be lightweight and durable enough to handle extreme bashing with your KRATON™ 6S, KRATON™ 4S, MAXX®, or whatever other 17mm-hex rigs you run, to give you the best all-around bashing experience possible.

The Menace HP 3.8" tires come pre-mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO634500). The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the pre-mounted Menace tires now!

* Note that the Menace HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Menace HP tires that is 75 mph or about 4,500 RPM. Over-revving your Menace HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two, or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.*

Please note: All tires & wheels are sold in pairs, unless otherwise noted

PRO1020610 | Menace HP 3.8" Street BELTED Tires Mounted on Raid Black 8x32 Removable Hex Wheels (2) for 17mm MT Front or Rear

MAXX® is a registered trademark of Traxxas® L.P.

• Lightweight and Durable
• BELTED Tire Handles Extreme Power and High Speeds with Ease
• Racing-inspired Tread and Low-Profile Carcass, Great for Speed-Runs
• Maximum Long Lasting Street Traction
• Foam Inserts Included
• Made in the USA, since 1982

• Removable Hexes Allow you to Easily Replace Damaged Hexes
• 17mm Zero & 1/2" Wide Offset 8x32 Hexes are Included
• Upgrade your Hex to 17mm Aluminum (PRO635600 & PRO635300)
• Wheel Made from High-strength, Durable DuPont Nylon Material
• Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
• M3 Wheel Hex Hardware Included
• Made in the USA, since 1982

• KRATON™ 6S (ARA8608V5, ARA106053)
• KRATON™ 4S (ARA4408V2)
• TALION™ 6S (ARA8707)
• MAXX®
• Other 1/8 and 1/10 Vehicles with 17mm Hex

ProLine Menace HP 3.8 Belted Tyre On Raid Black 8x32 17mm Hex Wheels (2) Specfications:

• Package Type: Pre-Mounted
• Tire Type: Street
• Track Surface: Street / All-road
• Wheel Position: Front/Rear
• Tire Tread: Menace HP BELTED
• Vehicle Type: Monster Truck
• Compound / Hardness: Medium
• Color: Black
• Scale: 1/8
• Inner Tire / Outer Wheel Diameter: 3.8 in
• Product Width: 3.3" (84 mm)
• Insert Material: Open Cell
• Product Height: 5.55" (141 mm)
• Quantity Option: 2 in a package
• Tire Compound: Medium
• Wheel Hex Size: 17mm
• Wheel Type: Raid

• (2) Menace HP 3.8" Street BELTED Tires Mounted on Raid Black 8x32 Removable Hex 17mm Wheels
• (2) 8x32 to 17mm 1/2" Offset Hex Adapters
• (2) 8x32 to 17mm Zero Offset Hex Adapters
• (16) M3 x 12mm long SHCS hardware