CEN 2023 M-Sport Ford Puma Rally 1:8 RTR

CEN 2023 M-Sport Ford Puma Rally 1:8 RTR

Brand: CEN CML

Part Number: CEN8999

£429.00 Web Price RRP £479.99

In stock: Usually ships same day

Request Price Match

FINANCE AVAILABLE

Upgrade to a higher performance battery pack and charger with this pro spec combo

1 x Voltz 4000mAh Hard Case LiPo - 7.4v 2S 50C - Deans #VZ0310
1 x eTronix Powerpal 3.0 AC/DC Performance Charger/Discharger - 80W 10A #ET0202

saving you £58.99 over RRP!

LiPo batteries are the latest craze to hit the RC scene and provide approximately 20% more runtime and power than comparable NiCd/NiMh batteries.

1 x Voltz 4000mAh Hard Case LiPo - 7.4v 2S 50C - Deans #VZ0310
1 x eTronix PowerPal EZ-4 50W LiPo Charger #ET0225

saving you £56.99 over RRP!

Fancy insane speed? Then look no further than 3 cell LiPo packs, delivering a huge 11.1v of power!

1 x eTronix PowerPal EZ-4 50W LiPo Charger #ET0225
1 x Voltz 3600mah Hard Case Low Profile 3S 11.1V 40C LiPo Pack - Deans #VZ0341

saving you £57.59 over RRP!

Upgrade to a higher performance battery pack and charger with this pro spec combo

1 x eTronix Deans Charge Lead (4mm Connectors) #ET0268
1 x Voltz 3600mah Hard Case Low Profile 3S 11.1V 40C LiPo Pack - Deans #VZ0341
1 x eTronix Powerpal 3.0 AC/DC Performance Charger/Discharger - 80W 10A #ET0202

saving you £59.82 over RRP!

CEN 2023 M-Sport Ford Puma Rally 1:8 RTR Features

ESC  

  • 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HobbyWing).
  • 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
  • Water-Proof and Dust-Proof for All Weather.
  • Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
  • Built-In Capacitor Module.
  • Automatic Throttle Range Calibration.
  • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
  • Over-Heat Protection and Throttle Signal Loss Protection.
  • 5 Levels of acceleration/punch.
  • 9 Levels of maximum brake force.

Motor

  • CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

 Servo

  • 12Kg Metal Gear Servo (By Savox).
  • 4.8V - 0.26 sec/60° 10.0 kg-cm.
  • 6.0V - 0.23 sec/60° 12.0 kg-cm.
  • With 25T Horn Gear Spline.

Radio System

AMP-30 TX 3-Channel Transmitter.

  • Frequencies: 2.4GHz.
  • Digital Trimming.
  • Steering Dual-Rate (ST D/R) Adjustment.
  • End Point Adjustment (EPA).
  • Build in Failsafe.
  • Power Supply: 4 x AA Batteries (Not Included).

AMP30 RX 3-Channel Receiver.

  • Frequency: 2.4GHz.
  • Power Supply: DC 4.8 ~ 6.0V.
  • Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body

  • Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition
  • Fully Detailed Injection-Molded Body Accessories Body Details
  • Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

Chassis

  • 3mm Aluminum Chassis
  • Front and Rear 3mm Aluminum Shock Towers
  • Aluminum Arm Brace
  • Full Precision Ball Bearing Support
  • Wider Body Mount Positions for Better Support
  • Front Skid plate with Durable Foam Bumper
  • Injection-Molded Rear Diffuser
  • Easy Access Battery Tray
  • Battery Tray Size 142mm x 48mm

Suspension

  • Aerodynamic Lower Arm Suspension Design
  • Big Bore Oil Filled Adjustable Coil Over Shocks
  • 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
  • Racing Spring
  • Adjustable Turnbuckles
  • Adjustable Wheelbase +/- 6mm

Gear Ratio

  • Spur / Pinion 46/14T 3.29:1
  • Ring & Pinion 40/17T 2.35:1

Drivetrain

  • Full Time 4-Wheels Drive
  • Center Shaft Drivetrain for more power transferred to the wheels

Metal Transmission Gears

  • Aluminum Adjustable Motor Mount
  • Oil Filled Two Differential Drive System      
  • Center Direct Drive
  • Hight Efficient Transmission System
  • 6 Gear Bevel Gear Type Differential
  • Front / Rear Harden Steel Dog Bone and outdrives

Wheel

  • High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

Tyres

  • High Performance Racing Rubber Compound Tyres 56 x 80 x 35.50 mm.

Specifications

Chassis Length: 18.11 inches (460mm)
Chassis Width: 9.06 inches (230mm)
Wheelbase: 11.80 inches (300mm)
Ground Clearance: 0.98 inches (25mm)
Weight: 5.51 lb. 2.5kg

Needed To Complete

  • Battery and charger (Recommend 2S - 3S Lipo Battery)

 

  • Brand: CEN CML
  • Part No: CEN8999
  • Barcode: 4717873089990
  • Scale: 1:8
  • Build Level: Assembled (RTR)
  • Power Source: Electric - Brushless
  • Surface Type: Off Road
  • Vehicle Type: Touring / Rally Car

Free UK Delivery!

This item is over £100, so qualifies for free standard UK shipping!

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

- 4th January 2024

I recently purchase this RC Car (my first in a very long time) and I can honestly say I am blown away by the looks and performance (I am running 3S Lipo). The Service from Wheelspin Models was great, no issues at all. Highly recommended!

Hi I want to order the cen racing ford puma wrc When will it be back in stock?? And if I order can you give me a rough idea when I’ll receive it
Asked by Dean Filby on 7th September 2023

Stock statuses including due dates if know are below the add to cart button.

Answered by: Steve @ Wheelspin Models

Is there an easy way to see what (if any) upgrades are available for this RC Car?
Asked by Martin on 25th October 2023

No upgrades have been release yet as soon as they are they will be under the spares section as optional parts.

Answered by: Steve @ Wheelspin Models

Hi, are you able to recommend a suitable gyro for this RC car? Thanks
Asked by Martin on 4th January 2024

Yes this one will work well SCH-SK-600142-02

Answered by: Steve @ Wheelspin Models

How can you bye this on finance I don't know how it works
Asked by Matthew 3 on 9th March 2024

There are several options available to you on our website - there are either PayPal pay in three, or finance options when you go to the checkout.

Answered by: Rich @ Wheelspin Models

Hi, are you able to provide the dimensions of the drive shafts pls? I only need one drive shaft and the £22 for the shaft and cups is excessive. Thanks
Asked by Martin Nicholls on 7th April 2024

Those dog bones are 56mm from pin to pin.

Answered by: Rich @ Wheelspin Models

Ask a Question Write a Review