JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in)

Fast, precise, snappy, rock-solid in high-g turns and beautifully smooth through graceful aerobatics, nothing quite beats the arrow-like flying qualities of the JPS-3 E2K pylon racer. That’s a recognised fact, for at the 2022 British National E2K Pylon Race Champs, JPS-3 designer and multiple pylon race champion, Paul Bardoe, flew this very design to victory.

Perfect for intermediate to advanced R/C pilots, this is model flying in one of its simplest yet most exciting and satisfying forms. Assemble in a matter of minutes, kit it out with a 1500KV outrunner, APC 8x8 i.c. prop, 80A ESC and 4S 2200mAh LiPo and you’ll just about be ready to punch holes in the sky.

JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in) Key Features:

• E2K race approved.
• Laser-cut balsa and ply.
• Pre-applied Oracover scheme.
• Quality hardware throughout.
• Suits 1500KV 4S electric set-ups.
• Pre-built and covered airframe components.
• Locked-in flying characteristics.
• Easy to hand-launch.
• Smooth, fast and bags of fun.

What's in the Box:

• 1x Pre-built and covered fuselage.
• 1x Pre-built and covered 2-piece wing.
• 1x Pre-built and covered tailplane.
• 1x Pre-built and covered fin.
• 1x Quality hardware pack.
• 1x Comprehensive instruction manual.

Needed to Complete:

• 1x 4-ch (minimum) Tx and Rx combo.
• 1x Radient 3536 1500KV outrunner.
• 1x ZTW Beatles G2 80A ESC.
• 1x 4S 2200mAh 50C LiPo.
• 3x Radient MS125MG servos.
• 1x APC 8x8" i.c. propeller.

Manuals & Parts Explosions:

JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in) Tech Specs:

• Shipping Weight: 1.04kg / 2.29lbs
• Product Length: 737mm / 29in
• Product Wingspan: 1,016mm / 40in

• Completion Level: ARTF
• Experience Level: Intermediate / Advanced
• Assembly Time: 300min
• Recommended Usage Environment: Designated outdoor model flying facility
• Colour: Red / White / Blue
• Material: Balsa / ply