Traxxas ESC Calibration
KB61
Updated 2022-10-19 by Simon
Calibrating a Traxxas ESC.
This article will show you how to program your Traxxas electronic speed control. These programming steps are the same for Traxxas speed controls. Your Traxxas electronic speed control may require periodic programming to maintain optimal performance. If your vehicle stops responding to throttle input,
You calibrate the ESC by following the steps below
1, Power on the transmitter
2, Plug a fully charged battery in to the ESC
3, Press the button to turn the ESC on but do not release the button, keep it pressed until the led on the ESC goes red, then release the button, the led will flash
4, Pull full throttle on the transmitter and hold it, the led will flash red
5, Now hold full reverse the led will flash green
6, now leave in neutral position the ESC will now complete calibration
.