Hobbywing MAX10 G2 140A ESC Combo With 3665SD 4000Kv G3 Motor

Hobbywing MAX10 G2 140A ESC Combo With 3665SD 4000Kv G3 Motor

Brand: Hobbywing

Part Number: HW38020345

£125.99 Web Price RRP £139.99

In stock: Usually ships same day

Request Price Match

HOBBYWING COMBO MAX10 G2 140A ESC 3665SD 4000KV BLK G3 MOTORFeatures

  • The EzRun Max10 G2 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of control feel and perfectly matches the EzRun 3652/3665 SD G3 motors.
  • Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more with greater effect.
  • The smart start-stop technology is introduced to the Max10 G2 ESC. The frameless fan will not be enabled to reduced noise and saving power. The fan will only work when the temperature rises to a certain level.
  • Compared with the previous generation of the MAX10 ESC, the total capacitance of the capacitor is increased by 74% and is overheating protected. The functions improve the power delivery from the battery to the ESC to avoid it from overloading and causing capacitors to explode.
  • Smart freewheeling technology enables the MAX10 G2 to have higher drive efficiency than the previous generation, resulting in lower operating temperatures and a minimum temperature of approximately 25°C lower than the previous generation.
  • After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging.
  • The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.

Specifications

Ezrun Series: 3665 SD G3
KV: 4000KV
P/n: 30402608
LiPo: 2-3S
R. (Ω): 0.00495Ω
No-load Current: 8.2A
Motor Diameter & Length: Φ=37 / L=65.8
Shaft Diameter & Length: Φ=5.0 / L=16.5
Pole: 4
Weight (g): 297.2g

 

Free UK Delivery!

This item is over £100, so qualifies for free standard UK shipping!

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

Would this fit a vorteks 3s ?
Asked by R Cree on 19th March 2023

Yes this would fit in that car for you but we would advise for on road use only on 3s lipo or off road on a 2s lipo.

Answered by: Si @ Wheelspin Models

Would a 4000kv motor suit a Traxxas Stampede better than the 3200kv?
Asked by Hugh Miller on 12th June 2023

We would normally advise not to go above 3500KV for an off road car on 3s lipo,  4000kv would be ok on 2s lipo.

Answered by: Si @ Wheelspin Models

Will this work well in a Tamiya tt02
Asked by James on 5th July 2023

Yes this will work in that car, the ESC is a little biiger than a normal one so it will be tight fit. but will work. if you wanted to look at an alternative, something like this will work.  SCH-SK-300060-02

Answered by: Si @ Wheelspin Models

When I bought a hobbywing brushless set I was told I’d have to solder the motor if I wanted sensored but I’m seeing hobby wing G2 and G3 motor/esc sets that look ready pre soldered. I want a ~4000kv sensored motor/esc to work with 2s lipo for my neo scorcher
Asked by John on 23rd October 2023

Yes these are soldered with XT60 connectors.

Answered by: Steve @ Wheelspin Models

I'm working to convert my HPI Bullet Nitro to Flux. And I'm looking for an ESC and a motor. Initially, I thought this could be a good fit as the stock motor was 4000 kv, and now I'm so confident about that. Will this combo be a nice fit for HPI Bullet????? This is my first car, so total noob here :)
Asked by Oleksii on 24th October 2023

We would recommend a lower kv something around the 3200 to 3300kv range will give more torque.

Answered by: Steve @ Wheelspin Models

Would this be the fastest combo to fit the Tamiya TT02-B or do you recommend another combo?? At the moment I’m running a Tamiya super stock BZ motor with 7.2v NIMH battery but need more speed!! Thanks
Asked by Lee on 5th December 2023

Hi we would recommend this combo

HW38020346

and then run a 2 or 3s lipo to suit.

You will be able to use your original pinion gear then and it will not stress the gears too much.

Answered by: Steve @ Wheelspin Models

Ask a Question Write a Review