Fastrax Roto Start Hand Starter + SH Back Plate (Fits Carnage NT With Modification)

Fastrax Roto Start Hand Starter + SH Back Plate (Fits Carnage NT With Modification)

Brand: Fastrax

Part Number: FAST565


SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.


Why not contact our team to see if an alternative is available?






Convenient quick and easy starting has arrived with the new Roto-Start system from Fastrax. The ideal immediate upgrade from a pullstart system, this allows you to start vehicles that may not be ideally suited to box start systems. Ideal for vehicles such as the FTX Rampage and Outrage where the engine is mounted a little higher and away from the chassis. Fits SH engines and others (check fitment dimensions online for your backplate). Supplied with rotostart backplate assembly.

Requires a 7.2v battery that is housed inside the unit body.

Please Note: The Fastrax Roto Start is not a universal fit for all engines on the market. Please check the measurements listed below before fitting.

Centre Hex Housing 12mm size.

Distance between the centre of the fixed mounting holes is 38mm from top right to bottom left (27mm top right to bottom right).

Hex shaft measures 6.5mm across flats.

Note: Will fit FTX Carnage NT but a little competent modelling is required, as the backplate hits the chassis, so the engine needs to be shimmed up around 2mm

Tech Note: Starting any engine should be done in short, sharp bursts. These are NOT designed to be "held on" for more than 15+ seconds at a time - doing so will cause heat build up and gear damage.

Two Simple UK Delivery Options

Royal mail at £3.95, or Express at £6.95.

Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

​
Would this be suitable for a Maverick Neon XB emngine VX1.6
Asked by Bruce on 25th November 2018

I'm not sure, but would suggest unlikely that it will fit.

Answered by: Ben @ Wheelspin Models

Hello, will it work with standert xtm xt2 terminator2? Thanks.
Asked by Darius on 20th December 2018

I don't believe so, no.

Answered by: Ben @ Wheelspin Models

Hi does this work with the HPI Savage X4.6
Asked by James Starkey on 26th December 2018

There are a few different versions of that Savage so we can't advise fully.  However, if you measure your pullstart, we list the dimensions on this starter as:

  • Centre Hex Housing 12mm size.
  • Distance between the centre of the fixed mounting holes is 38mm from top right to bottom left (27mm top right to bottom right).

Answered by: Ben @ Wheelspin Models

Hi will this fit a nanda nrb-5 thanks paul.
Asked by Paul on 4th January 2019

No this won't fit sorry

Answered by: Ben @ Wheelspin Models

Hi, will it fit on nitro bull 28c?
Asked by Jaka on 25th April 2019

I don't know that model, but would guess it's unlikely to fit.

Answered by: Ben @ Wheelspin Models

will it fit carnage nt
Asked by Neil on 6th April 2020

Yes, as per description you will need to modify:

"Note: Will fit FTX Carnage NT but a little competent modelling is required, as the backplate hits the chassis, so the engine needs to be shimmed up around 2mm"

Answered by: Ben @ Wheelspin Models

Will the back plate be a straight fit for a force engine?
Asked by Mark on 9th July 2020

No, this is for SH engines

Answered by: Ben @ Wheelspin Models

Will this fit the engine in the Kyosho Inferno Neo 3.0?
Asked by Andrew Ernest on 13th August 2020

No I don't believe so

Answered by: Ben @ Wheelspin Models

Would it fit a thunder Tiger mta4 s28
Asked by Finlay on 26th September 2020

No this is designed for the SH brand of engines. 

Answered by: Anthony @ Wheelspin Models

Do you think this will fit an lrp zr.32 spec 4 engine as I'm fed up of the pull start
Asked by Nathan Allen on 20th October 2020

No I don't think that will fit sorry

Answered by: Ben @ Wheelspin Models

Hi I have a hpi trophy truggy 4.6 and have had it for over ten years using on and off for many years. I have a pull start at the moment but want to change to electric starter. It has a 12 mm one way bearing and holes are 27mm apart all round. Will this set fit ok for this model as I know there is a newer version of my truggy now
Asked by Matthew Jacobs on 30th December 2020

I think FT02623F may suit your needs

Answered by: Ben @ Wheelspin Models

Hi will this fit a ftx torro I think its same or very similar to a ftx carnage thanks
Asked by Andrew Douglas on 1st January 2021

Yes same engine as Carnage so should fit with same modification

Answered by: Ben @ Wheelspin Models

Where can I find this in Spokane Washington
Asked by Clint Patrick on 2nd October 2022

We ship world wide, simply add the item to your cart and select the country from the drop down box

Answered by: Si @ Wheelspin Models

Ask a Question Write a Review