Programmable sensorless brushless speed controller (ESC)
The Brushless Combo Set "Thrust BL ECO" 1:8 is primarily aimed for the owners of 1:8 Ready Set vehicles or KIT vehicles that want to make simple adjustments to increase their racer performance. The set includes the brushless high-performance motor with aluminum housing and the matching speed controller. The system is designed without sensor cable, allowing a particularly easy handling.
Complete brushless set - ready to use. Including gold-bonded plug system and t-plug battery connector.
Multiple protecting features like low voltage cut-off protection, over-heating protection and throttle signal lose protection. Easy programmed with the set button.
TECHNICAL SPECIFICATION ESC:
- Waterproof 120A ESC incl. cooler
- Standard running mode: forward/brake/reverse (programmable: forward/brake; forward/reverse)
- Standard LiPo cut-off: 3.0V/cell (programmable: non-protect. / 2.6V / 2.8V / 3.2V / 3.4V)
- Overheat protection
- Peak amps: 760A
- BEC: 6V / 3A (switch mode)
- Battery: 6-12 cells NiMH / 2-4S LiPo
- Motor limit: 2S @ 6000KV / 3S @ 4000KV / 4S @ 2600KV
- Brake force: 75% (programmable)
- Resistance: 0.0004 ohm
- Standard brake force: 50% (programmable: 25% / 75% / 100% / Disable)
- Standard drag brake: 0% (programmable: 5% / 10% / 20% / 40% / 60% / 80% / 100%)
- Standard start mode (Punch): Level 5 (programmable: Level 1/2/3/4/6/7/8/9/10)
- Motor timing: 18.75
- Size (L/W/H): 59,3x38,4x33,6 mm
- Weight: 113g
BL Motor "Thrust A8 ECO" 2300KV
Dustproof design, heat resistant wires and gold plated connectors make this motor to a masterpiece - suitable for Buggies, Truggies and Monster Trucks.
TECHNICAL SPECIFICATION MOTOR:
- 2300KV
- 4 Pole
- LiPo cells: 2-6
- Power/W: 650W
- Size Ø: 36mm
- Size length: 68mm
- Shaft Ø: 5mm (Module 1)
- Weight: 296g
Two Simple UK Delivery Options
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
We Ship Worldwide!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
No product reviews yet!
is the motor 1:8 sized?
Asked by Aidan on 4th September 2017
Yes
Answered by: Ben @ Wheelspin Models
What Lipo battery should I buy to go with the motor, I'm converting a hyper9 for some fun
Asked by Dave on 27th December 2017
We'd probably stick to 4S, so something like VZ0350 would be ideal
Answered by: Ben @ Wheelspin Models
can i run two 7.2v packs in series with this ESC?
Asked by Ash on 27th February 2018
Yes, this can handle upto 12 NiMh Cells or 4S LiPo
Answered by: Ben @ Wheelspin Models
The picture looks like it has only one cable. Can this esc run two 2s lipos or one 4s or both?
Asked by Ben Demetriou on 12th February 2019
This has one deans connection input. You can run 2 x 2S for example if you wanted by using a deans serial Y connector such as ET0707
Answered by: Ben @ Wheelspin Models
Hi, do you sell a programming card for the Absima brushless combo that is £111? And is this suitable for a 1/8 scale buggy conversion? (Hobao Hyper 7)...I don't want too spend too much. Thanks, Malc.
Asked by Malc Wilkes on 27th January 2021
Program card for these is 2110041
Answered by: Ben @ Wheelspin Models
This will need cooling (fins and fan) as well?
Asked by Col on 4th April 2021
It depends on your setup - but yes likely in a high demand setup
Answered by: Ben @ Wheelspin Models
