ABM LiPo Race Battery - 6000mAh 7.6V 130C 5mm Shorty - BRCA Approved
Brand: Amy Booth Models (ABM)
Part No: ABM20002
£59.99
RRP £60.00
In Stock: Usually ships same day
The ABM LiPo Race Battery 6000mAh 7.6V 130C 5mm Shorty is a BRCA approved hardcase pack designed for reliable performance and durability. Part number ABM20002. It features 5mm discharge tubes and a 2mm balance port within a sonic-welded ABS+PC case, with compact shorty dimensions to suit a wide range of racing layouts.
Features
- Configuration: Shorty Full Size Style
- Battery pack weight: 225 ± 9g
- Length: 96mm +0/-1mm
- Width: 46.8mm +0/-1mm
- Thickness: 24.9mm +0/-1mm
- Casing material: ABS+PC
- Casing nominal thickness: 1.0mm
- Casing sealing: Sonic-welding
- Discharge point: dia. 5mm tubes (positive / negative terminals)
- Charging port: dia. 2mm tube balance
Ratings
- Nominal Voltage: 7.6V
- Nominal Capacity: 5900–6100mAh
- Nominal Impedance: 0.9–1.3 mOhm per cell
- Charging method: CC/CV mode (high quality LiPo chargers only)
- Charge cutoff voltage: 8.40V ±0.05V
- Charging current: 6.0 amps (typical)
- 2C charging possible, with special attention for accurate cut off
- Discharge cutoff voltage: 6.2V ±0.05V
- Discharge continuous: 65C
- Discharge pulse (max): 130C (less than 6 sec for each pulse)
- Discharge Temp range: -20~+60 deg-C
- Charging Temp range: 0~+45 deg-C
- Storage Temperature: -20~+45 deg-C
- Storage Humidity: 65 ±20% RH
Secure Payments
Secured by Stripe
ABM-RC LiPo Race Battery - 6000mAh 7.6V 130C 5mm - BRCA Approved Features:
- Configuration: Shorty Full Size Style
- Battery pack weight: 225 ± 9g
- Length: 96mm +0/-1mm
- Width: 46.8mm +0/-1mm
- Thickness: 24.9mm +0/-1mm
- Casing material: ABS+PC
- Casing nominal thickness: 1.0mm
- Casing sealing: Sonic-welding
- Discharge point: dia. 5mm tubes (positive / negative terminals)
- Charging port: dia. 2mm tube balance
Ratings
- Nominal Voltage: 7.6V
- Nominal Capacity: 5900-6100mAh
- Nominal Impedance: .9-1.3 mOhm per cell
- Charging method: CC/CV mode (high quality LiPo chargers only)
- Charge cutoff voltage: 8.40V ±0,05V
- Charging current: 6.0 amps(typical)
- 2C charging possible, with special attention for accurate cut off
- Discharge cutoff voltage: 6.2V ±0,05V
- Discharge continuous: 65c
- Discharge pulse (max): 130c (less than 6sec. for each pulse)
- Discharge Temp range: -20~+60 deg-C
- Charging Temp range: 0~ +45 deg-C
- Storage Temperature: -20~+45 deg-C
- Storage Humidity: 65 ±20% RH
Key Info:
- Brand: Amy Booth Models (ABM)
- Part No: ABM20002
- Voltage: 2S HV - 7.6v
- Connector: 5mm Tubes
- Case Type: Shorty Hard Case
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
All reviews are subject to moderation
Questions & Answers
Real questions from real customers. Why not ask your own?
Would this fit and work in the ftx carnage 2.0?
Kaiden / 7th December 2024
That would not be one we recommend we would suggest these C-49125-D
Steve @ Wheelspin Models
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.
MRT MPTX Transponder
ABM LiPo Race Battery - 4000mAh 7.6V 130C 5mm Shorty - BRCA Approved
Core RC Heatsink Bullet Plug Grips - 5mm
Team Associated RC10B7 Chassis Protective Sheet
Associated RC10B7D Team Kit
Team Associated 13mm Shock Rebuild Kit
Team Associated 13mm Front Shock Springs Yellow 3.8Lb/In - L44 - 6.5T - 1.2D
Futaba R404SBS-E F-4G S BUS Telemetry Receiver
Hobbywing XeRun XR10 Pro V4 G2S Speed Control - Black
Schumacher Mezzo Rear 1:10 Buggy Tyres - Yellow - Pre-Glued (2)
Hobbywing OTA Programmer
Schumacher Splinter 1:10 2WD Front Buggy Tyres - Yellow (2)
Centro C10Pro Competition 1:10 ESC
Team Associated RC10B7 Hinge Pin Set
Team Associated RC10B7 Front Anti Roll Bar Set