GBP
€ Euro
$ USD
RPM Front Bearing Carriers For The Traxxas Slash, Rustler, Stampede, Bandit (Upgrades TRX3736) - Black
Brand: RPM
Part No: RPM80372
In Stock: Usually ships same day
RPM80372 front bearing carriers are an oversized upgrade that replaces Traxxas #3736 on popular 2WD platforms. Moulded in black, they accept larger 5x11x4mm bearings to increase load capacity and extend service intervals compared with the stock 5x8mm items.
Key Features
- Suggested compatibility: Traxxas 2WD Slash, Nitro Slash, Electric Rustler, Electric Stampede, and Bandit
- Replaces stock Traxxas #3736
- 5x11x4mm size bearings not included
- Available in Black and Blue (this part is Black)
Overview
RPM oversized bearing carriers are designed to address worn bushings and weak 5x8mm bearings. Moving to 5x11mm bearings provides higher load ratings and significantly increases the time between maintenance periods. The reinforced RPM design is exceptionally strong; RPM even state they won’t ever break. For a matched front and rear setup, pair these with RPM #80382 Rear Bearing Carriers.
Tech Notes
- Four 5x11x4mm bearings are required for each kit (not included).
Specifications
- Colour: Black
- Hop-Ups & Optional: Bearing Carriers
- Material: Plastic
Secured by Stripe
Key Features
- Fits the 2WD Slash, Nitro Slash, Electric Rustler and Electric Stampede
- Replaces stock Traxxas #3736
- 5x11x4mm size bearings not included
- Available in Black and Blue
Overview
RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time between maintenance periods. In addition, our bearing carriers are so strong; we guarantee that they won't ever break! Molded in black. When used in conjunction with our #80382 Rear Bearing Carriers, you'll never have to worry about worn-out bushings or blown wheel bearings again!
Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit).
RPM Front Bearing Carriers For The Traxxas Slash, Rustler, Stampede, Bandit (Upgrades TRX-3736) Specfications:
- Color: Black
- Hop-Ups & Optional: Bearing Carriers
- Material: Plastic
Key Info:
- Brand: RPM
- Part No: RPM80372
- Barcode: 672415803721
- Fitment: Option Part
Additional Categories:
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.
RPM Rear Bearing Carriers For The Traxxas Slash, Rustler, Stampede, Bandit (Upgrades TRX3752) - Black
RPM Upgrade Caster Blocks For Traxxas Electric Stampede, Rustler, Slash 2WD And NItro Slash - Black (Replaces TRX3632)
RPM Front Wishbone Arms - Fit Traxxas Slash, Rustler, Stampede (Upgrades - TRX3631) - Black
RPM Front Bulkhead For Traxxas 2WD Cars (Replaces TRX2530A) - Black
RPM Traxxas Slash Rear Arms - Black
RPM Rear Bumper For Traxxas Slash 2WD - Black
RPM Wide Front Bumper - Traxxas Rustler, Stampede, Sport And Bandit - Black
RPM Rear Wishbone Arms - Fit Traxxas 2WD Rustler and Stampede (Upgrades - TRX3655) - Black
Traxxas Suspension screw pin set steel (hex drive) (requires part 2640 for a complete suspension pin set) (Rustler Stampede Bandit)
Traxxas Suspension pins 44mm (2) w/ E-clips
Traxxas Steel Suspension Pins 2.5x31mm
Traxxas Caster blocks (L R) (30-degree)
Traxxas Axles (front) (2)
Traxxas Servo saver
Traxxas 12mm Hex Wheel Hubs (2)/ stub axle pins (2)