GBP
€ Euro
$ USD
Hobbywing Xerun V10 17.5T G3R Black Motor
Brand: Hobbywing
Part No: HW30401131
THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
PLEASE SEE ITEM #HW30401141 AS A REPLACEMENT
The Hobbywing Xerun V10 17.5T G3R Black Motor (HW30401131) is engineered for extremely high-level 1/10 stock racing. Compared with the V10 G3, the G3R delivers notable gains in torque, KV and peak output while reducing electrical resistance for higher overall efficiency. A precision sensored design and balanced rotor provide excellent linearity and throttle feel on track.
A lightweight 141g can, optimised airflow around the stator, and additional machining on the end plates aid heat dissipation and efficiency. The rebuildable construction makes routine maintenance and part replacement straightforward. High-quality materials throughout – including a high-performance stator core, 200°C heat‑resistant wire and rotor, high-precision bearings and copper solder tabs – support consistent performance and durability. The motor is compliant with IFMAR, ROAR, EFRA and BRCA, and certified by RoHS, CE and FCC.
Key Features
- High precision hall sensor
- Specially designed for extremely high level racing
- Rebuildable Design
- High performance stator core
- Heat resistant wire
- Heat resistant precision rotor
- Compliant with IFMAR, ROAR, EFRA, BRCA
Performance Improvements
- Torque improved by 13.3% vs V10 G3
- KV improved by 6.5% and max output power by 8.6% vs V10 G3
- Resistance reduced by 11% and efficiency improved by 6% vs V10 G3
- Lightweight 141g design; approximately 8.6% lighter than some popular stock motors
- Enhanced can design for increased airflow and improved cooling
Temperature Monitoring
- Infra-red temperature gun
- Hobbywing LCD programmer
- Hobbywing WiFi module and smartphone (WiFi Link App)
If the motor temperature is too high, allow it to cool, then reduce timing or increase the FDR before testing again.
Spec Check
- Scale: 1/10th On-road Stock Class
- Brushed/Brushless: BL
- Sensored/Sensorless: SD
- Pole Count: 2
- KV Rating: 2750KV
- Turns: 17.5T
- LiPo Cells: 2-3S
- O.D: 35.9mm
- Length: 50.5mm
- Shaft Diameter: 3.17mm
- Shaft Length: 14mm
- Weight: 141g
- Timing: 30–60 Degrees (motor dependent)
Secured by Stripe
HOBBYWING XERUN V10 17.5T G3R BLACK MOTOR
The HobbyWing XeRun V10 G3R has been specially designed for extremely high level stock racing.
The torque of the G3R Stock motor has been improved by 13.3%, the KV & max output power improved by 6.5% and 8.6% respectively compared to the V10 G3 motor.
The G3R Stock is low resistance but high efficiency. The resistance of this G3R hase been reduced by 11% while the efficiency has been improved by 6% when compared to the V10 G3.
The built in high precision hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor. The motor can has been designed to be easy to dismantled for maintenance purposes and for the replacement of any parts that wear and is super lightweight.
The G3R motor weighs only 141g and is 8.6% lighter than some other popular stock motors on the market. The special can design allows for extra airflow around the stator core to maximize cooling and efficiency. Even more of the case has been machined from the end plates motors further help reduce heat.
The use of a high performance stator core, heat resistant wire(200degC), a heat resistant precision rotor (200degC), high precision and high strength bearings and copper solder tabs guarantee outstanding performance and super durability.
It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC
HobbyWing XeRun V10 G3 Information:
You can get information about the motor temperature via an infra-red temperature gun, the LCD programmer or the WiFi module & smart phone (with the Hobbywing WiFi Link App installed). If the motor temperature is too high, you must let the motor cool down first then reduce the timing or increase the FDR and then test again.
HobbyWing XeRun V10 G3 Features:
- High precision hall sensor
- Specially designed for extremely high level racing
- Rebuildable Design
- High performance stator core
- Heat resistant wire
- Heat resistant precision rotor
- Compliant with IFMAR, ROAR, EFRA, BRCA
Spec Check:
- Scale: 1/10th On-road Stock Class
- Brushed/Brushless: BL
- Sensored/Sensorless: SD
- Pole Count: 2
- KV Rating: 2750KV
- Turns: 17.5T
- LiPo Cells: 2-3S
- O.D: 35.9mm
- Length: 50.5mm
- Shaft Diameter: 3.17mm
- Shaft Length: 14mm
- Weight(g): 141g
- Timing: 30-60 Degrees (Motor Dependant)
Key Info:
- Brand: Hobbywing
- Part No: HW30401131
- Barcode: 6938994419642
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.