EUR
£ GBP
$ USD
HPI SRL-706 3-in1 ESC/RX/LED Controller
Brand: HPI
Part No: HPI-160832
Shadow Stock: Usually ships within 4-5 days
The HPI SRL-706 3-in1 ESC/RX/LED Controller (part number HPI-160832) combines a receiver, brushed ESC and light controller in one compact unit for 1/18th-scale RC vehicles. It delivers clean control and lighting functions for small touring cars, trucks and rock crawlers, with the convenience of a single module. Suggested compatibility: 1/18th touring cars, trucks and rock crawlers using brushed motors.
With water-resistant construction, the SRL-706 is ready for running on damp surfaces, light rain or snow. It pairs with the HPI TF-706 transmitter for simple setup, driving modes and LED control.
Key Features
- Works with TF-706 transmitter
- Built-in LED controller with 5 light modes selectable from the transmitter
- Adjustable parameters using TF-706 DIP switches
- Two running modes: F/B/R (normal) and F/R (rock crawler)
- Two battery modes: LiPo or NiMH
- Adjustable drag brake
- Water-resistant design
Specifications
- Operating voltage: 2S LiPo or 5–7 cell NiMH
- BEC output: 6V/1A
- Continuous/peak current: 10A/50A
- Dimensions: 33 x 30 x 12 mm (excluding capacitor)
- Weight: 11 g
Before running in wet conditions, ensure all onboard electronics are suitably protected. If your ESC uses a cooling fan, disconnect it before wet use and allow it to dry fully afterwards. Avoid submerging motors, rinse off dirt or salt with clean water after use, and re-lubricate exposed drivetrain parts.
Secured by Stripe
The SRL-706 3-in1 ESC/RX/LED Controller is a combined receiver, speed controller, and light controller for RC vehicles up to 1/18th scale! Whether you've got a touring car, truck, or rock crawler this is the ideal unit to control the power for any 1/18th vehicle equipped with a brushed motor.
The SRL-706 is also water-resistant, making it ideal for anyone who enjoys playing on the beach, in snow or even through mud!
SRL-706 Features:
- Works with TF-706 transmitter
- Built in LED controller: 5 Light modes selectable from the
transmitter
- Adjustable parameters using the TF-706 DIP switches
- 2 Running Modes: F/B/R (normal running) , F/R (Rock Crawler)
- 2 Battery Modes: LiPo or NiMH
- Adjustable Drag Brake
- Operating Voltage: 2S LiPo / 5-7Cell NiMH
- BEC Output: 6V/1A
- Continuous/Peak Current: 10A/50A
- Dimensions: 33x30x12mm (Excluding capacitor)
- Weight: 11g
NOTE: Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
Download PDF instructions for #160832 (18.8 MB)
Key Info:
- Brand: HPI
- Part No: HPI-160832
- Barcode: 5050864034685
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.