SKYRC D100 V2 AC/DC Dual Balance Charger / Discharger / Power Supply
Brand: Overlander
Part No: OL-3317
THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
PLEASE SEE ITEM #SCH-SK-100131 AS A REPLACEMENT
The Overlander SKYRC D100 V2 (OL-3317) is a versatile AC/DC dual balance charger, discharger and power supply designed for RC enthusiasts who need flexible, reliable battery care. Supporting a wide range of chemistries and cell counts, this RC-D100V2 combines clear, simple operation with advanced control and monitoring for confident charging at home or at the field.
Key Features
- Dual independent outputs: 2x100W on DC input; on AC input the 100W is intelligently distributed across two channels
- Integrated 100W/13.8V DC power supply mode for powering suitable DC equipment
- Voice Guide for user-friendly prompts and customisation
- Terminal Voltage Control (TVC) for fine tuning
- Re-Peak mode for NiMH/NiCd packs
- Battery meter and internal resistance meter
- PC communications for monitoring/control
- Scan-to-Go via ChargerTracker V2 app: create QR codes to load saved charging profiles
- Built-in Bluetooth for iOS and Android app connectivity
Specifications
- Input voltage: AC 100-240V; DC 11-18V
- Charge circuit power: AC input 100W; DC input 2x100W
- Discharge circuit power: 2x10W
- Charge current range: 0.1-10A
- Discharge current range: 0.1-5A
- Balancing port drain: max 200mA/cell
- Trickle charging current: 20mA-300mA & OFF
- LiPo/LiFe/LiIon/LiHV: 1-6S
- NiMH/NiCd: 1-15S
- Pb (lead acid): 2-20V
- Dimensions: 163 x 153 x 72mm
- Net weight: 975g
What’s Included
- Mains power lead
- 2 x XH balance boards
- 2 x charging cables
- 2 x XT60 charging cables
- Power cord for AC
Safety And Control
The D100 V2 incorporates automated protections including charging current limit, capacity limit, temperature threshold and processing time limit, helping safeguard your batteries. With TVC, battery meter and IR measurement available on-device, you can monitor pack condition and adjust parameters with precision.
Connectivity And App Control
Operate and log sessions via PC communications or use the built-in Bluetooth link with iOS/Android. The ChargerTracker V2 app adds Scan-to-Go QR functionality so you can store and recall charging settings consistently across your packs.
Combining dual-output flexibility, a practical 100W AC/DC architecture and comprehensive battery support, the Overlander SKYRC D100 V2 AC/DC Dual Balance Charger / Discharger / Power Supply is a dependable addition to any RC charging setup.
Secured by Stripe
The RC-D100V2, is adapted to a full range of chemistries (LiPo, LiFe, LiIon, NiMH, NiCd and PB) and comes with a comprehensive set of leads making it fully-prepared for practically any battery type. It is capable of operating as a power supply, with the maximum output of 100W to help hobbyists power their DC equipment. This charger is specially designed to cater for the higher end user, but with the aid of a simple-to-use interface and a complete set of instructions, this charger is by no means limited to experts.
Overlander SKYRC D100 V2 Features:
- Voice Guide: makes the charger more user-friendly and customizable.
- Two independent charging circuits (dual 2x100W output on DC (or with power supply) and 100W can be distributed across 2 channels on AC)
- DC Power Supply: can supply 100W/13.8V DC power, allowing hobbyists to power equipment on the field.
- Terminal voltage control
- Re-Peak mode for NiMH/NiCD batteries
- Battery meter
- Battery internal resistance meter
- PC communications
- 'Scan to go' function via ChargerTracker V2 app: create QR codes that save and load the charging setting for you batteries.
This charger is supplied with a mains power lead, 2 x XH balance boards, 2 x charging cables, 2 x XT60 charging cables and a power cord for AC.
The RC-D100V2 has been created with automated safety precautions, including a charging current limit, capacity limit, temperature threshold and processing time limit.
This charger is also compatible with both iOS and Android smart phones via a built in Bluetooth, making operation easier than ever.
Overlander SKYRC D100 V2 Specifications:
- Input Voltage AC 100-240V DC 11-18V
- Charge Circuit Power AC Input 100W DC Input 2x100W
- Discharge Circuit Power 2x10W
- Charger Current Range 0.1-10A
- Discharge Circuit Range 0.1-5A
- Current Drain for Balancing Port Max 200mA/cell
- Trickle Charging Current 20mA-300mA & OFF
- LiPo/LiFe/LiIon/LiHV Battery Cell Count 1-6S
- NiMH/NiCd Battery Cell Count 1-15S
- Pb Battery Voltage 2-20V
- Dimensions 163 x 153 x 72mm
- Net Weight 975g
Key Info:
- Brand: Overlander
- Part No: OL-3317
- Barcode: 5060470212155
- Input Voltage:
• 12V
• 240V (UK mains) - Included Connectors:
• 4mm Banana Sockets
• Deans
• XH LiPo Balancers
• XT60 - Chemistry:
• LiPo
• NiMh / NiCd
• Sealed Lead Acid
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
Excellent charger,good quality item all round,and delivery was very quick,up to your usual standard.cheers.
WRITE A REVIEW
Questions & Answers
Yes it will charge 4S
No it's not included, but you can buy it cheaply under part OL-2984
ASK A QUESTION
For more in depth queries, please contact us.









