Fusion NX86 AC/DC NiMH Charger

No sorry this is a Nimh only charger.

Yes, that would take around 1.5-2hours to charge

Charge that at 3 Amps

This will work with the NiMh batteries in the Kanyon, but not the LiPo in the mini

Yes, this should be fine with the 7.2v NiMH batteries you'll be using in your Hornet :-)

Yes, that would work fine with a 5000mah NiMh battery

So we'd charge that at 3.5A and it will take around 45-50 mins to charge.

Yes, it'll charge it no problem - but you would need an adapter such as DYNC0070

1.2 Amp charge rate

That depends what batteries you have in there...

If they are for example 2000mah batteries, this would charge in around 50 minutes at the 2 Amp setting.

Yes, it includes a Traxxas charge lead.

Set it to 3.5 Amps and it should charge in around 50 mins.

Yes, this includes a Tamiya charge lead.

Set it to 2 Amps an a 2000mah battery would charge in just under 1 hour.

This is a fast charger, and once charged it will switch to trickle charge.  As with any charger however, we wouldn't recommend leaving it unattended.

On a NiMh battery you wouldn't want to charge at more than 1C (so say 5 Amps for your 5000mah battery).

This charger can charge at 5 Amps maximum, so would take around 45-60 mins to fully charge your 5000mah battery.

Yes this comes with the Tamiya style connector and will work fine with the FTX batteries.

Yes, it could charge a 5500mah battery in around 1 hour at 5 Amps.

We'd recommend no more than 2 Amps for your 1800mah battery.

The Euro version has a euro plug.

You will want the normal version if you are in the UK.

If your battery has a Tamiya connector it will plug directly into this charger.

It would take around 45 mins to charge an 1800 battery at the 2 Amp setting.

Yes, this would charge that no problem.

Yes, we keep this item instore