EUR
£ GBP
$ USD
KO EX-NEXT BASIC w/KR-242XT Double Receiver
Brand: KO Propo
Part No: SCH-KO10779
€355.05
RRP €373.74
Out Of Stock
Request Stock NotificationThe KO Propo EX-NEXT BASIC w/KR-242XT Double Receiver set (SCH-KO10779) pairs the EX-NEXT BASIC pistol transmitter with the KR-242XT receiver. Built on the new XT system, EX-NEXT achieves the fastest communication speed in the industry and delivers a fine, smooth manoeuvring feel. The included KR-242XT operates in XT Telemetry Mode, while the transmitter also supports XT Advanced Mode when used with a KR-420XT receiver. Made in Japan.
Key Highlights
- XT system with selectable XT Advanced Mode or XT Telemetry Mode
- Approx. three times the communication speed of EX-RR in XT Advanced Mode
- High-definition, high-resolution control for smooth operation
- Telemetry with REAL TIME ICS via a 4S serial servo connected to the KR-242XT B/S port
- HCS supported with per-channel mode selection from the transmitter
- 50-model memory
XT Advanced Mode
EX-NEXT is redesigned from the ground up for speed and precision. In XT Advanced Mode, response surpasses even previous HCS performance. For this ultra-high-speed mode, use serial-compatible “4S” servos or HCS-compliant RSx3/BSx3 series servos; general servos may show reduced travel at this speed. Note: the bundled KR-242XT is XT Telemetry only—use a KR-420XT to enable XT Advanced Mode.
XT Telemetry Mode
XT Telemetry Mode provides two-way communication and remains faster than the EX-RR. With a serial 4S servo connected to the KR-242XT B/S port, REAL TIME ICS lets you adjust servo parameters directly from the transmitter for more refined setups.
High-Speed Serial Servo Support
Serial control sends digital position data and reacts significantly faster than conventional PWM. Suggested compatibility includes KO Propo RSx4S and BSx4S series servos (sold separately).
HCS Support
EX-NEXT and KR-242XT support HCS from the RSx3/BSx3 series. Receiver mode can be changed from the transmitter per channel. For HCS operation, connect servos to channels 1–4 on the KR-242XT; compatible servos switch to HCS automatically when an HCS signal is received.
Specifications
- Dimensions: 240.5 x 163.0 x 107.2 mm (excluding protrusions)
- Weight: 551 g (battery not included)
- Power supply: 4x AAA dry cells, 4x Ni-MH; Li-Fe 2S 6.6 V*; Li-Po 2S 7.4 V* (batteries sold separately)
- Current: 200 mA or less
- Channels: 4ch (PWM/Serial)
- Frequency: 2.4 GHz
- Radio Mode: XT
- Model Memory: 50
- Default settings: RF Mode XT Telemetry; Receiver–Servo Response NORMAL
Suggested Compatibility
- Receivers: KR-420XT, KR-242XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
Notes & Limitations
- If using Li-Fe or Li-Po, use KO Propo Battery Stand Unit*
- Not compatible with EXP-104 LCD Xpansion Units
- Not compatible with FHSS or DSSS receivers (e.g. KR-418FH, KR-415FHD, KR-210S)
- Images may show prototype items
Secure Payments
Secured by Stripe
Introducing the KO PROPO EX-NEXT BASIC Transmitter and KR-242XT Double Receiver set.
[Specifications]
# Dimensions: 240.5 x163.0 x107.2mm (Does not include protrusions)
# Weight: 551g (battery not included)
# Power supply: AAA size dry battery x4,
Ni-MH battery x4,
Li-Fe battery (2cell 6.6V)*,
Li-Po battery (2cell 7.4V)*,
(Batteries are sold separately.)
# Current: 200mA or less
# Channel: 4ch（PWM/Serial）
# Frequency: 2.4GHz
# Radio Mode: XT
# Model memory 50
# Default Settings:
RF Mode (Transmitter–Receiver): XT Telemetry
Response (Receiver–Servo): NORMAL
# Compatible receiver: KR-420XT, KR-242XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
*If you use Li-fe, Li-po, you must use with our option unit (Battery stand Unit).
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Made in Japan
Basic Model with a Simple Configuration
This is the basic model of the "EX-NEXT" series, which features ultra-high-speed response enabled by XT technology. By minimizing exterior decoration, we have successfully reduced costs, allowing us to offer this renewed version at a more affordable price. The specifications and functions of the unit remain unchanged, so you can enjoy the high-end performance with ease.
Equipped with a new standard "XT" that achieves the fastest communication speed in the industry.
EX-NEXT features the newly implemented “XT” system, an evolution beyond the conventional “FHSS.” You can choose between “XT Advanced Mode” for ultra-high-speed response and “XT Telemetry Mode” for bi-directional communication (telemetry) support.
XT Advanced Mode
EX-NEXT has been newly developed with a complete redesign of both its control and communication systems from the ground up. It achieves industry-leading communication speed and ultra-high-resolution precision. In its fastest response mode, "XT Advanced Mode," EX-NEXT delivers approximately three times the communication speed compared to the EX-RR. This performance surpasses even the previously fastest HCS mode.
High-speed communication in the XT advanced mode improves the information density that will be sent to the receivers.
You will feel a "Fine and smooth maneuvering feeling" by unprecedented high-definition and high-resolution control when operating.
*When using the ultra-high-speed XT Advanced Mode, please combine it with either serial-compatible servo “4S” or HCS-compliant "RSx3/BSx3" series servos. Due to the extremely fast communication cycle of the XT Advanced Mode, general servos might experience limitations in their operating angles.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
XT Telemetry mode
EX-NEXT is equipped with telemetry (bi-directional communication) functionality. By connecting a serial-compatible “4S” servo to the B/S port of the KR-242XT, “REAL TIME ICS” becomes available. This allows you to adjust servo parameters directly from the transmitter without needing to retrieve the machine. Now you can achieve more refined and uncompromising setups with greater freedom than ever before.
Also, even using the XT Telemetry mode that is 2-way communication, the High-speed response is still faster thanthe EX-RR.
High speed supported by Serial servo.
Currently mainstream servo control method is performed by PWM control. PWM control method uses pulse width to send position of servos output from receiver. Serial control method uses a digital signal value to send the position of the servo output. So, communication speed of the Serial control method will be significantly faster than a PWM control method, time ofthe servo’s action from your operation input is shorter. Operating feeling will be ultra high speed like operating thecar directly.
<Compatible servos> RSx4S / BSx4S Series
*Servo is sold separately.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
Supported HCS.
EX-NEXT & KR-242XT support the use of HCS that was adopted from the RSx3, BSx3 series. Until now, it was necessary to change the receiver mode using the settingdevice, but with EX-NEXT this can be changed from the transmitter for each channel. HCS compatible servos are automatically change to HCS mode when the received signal is HCS. If you want use HCS, please connect servos to 1-4ch ofthe KR-242XT.
[Specifications]
# Dimensions: 240.5 x163.0 x107.2mm (Does not include protrusions)
# Weight: 551g (battery not included)
# Power supply: AAA size dry battery x4,
Ni-MH battery x4,
Li-Fe battery (2cell 6.6V)*,
Li-Po battery (2cell 7.4V)*,
(Batteries are sold separately.)
# Current: 200mA or less
# Channel: 4ch（PWM/Serial）
# Frequency: 2.4GHz
# Radio Mode: XT
# Model memory 50
# Default Settings:
RF Mode (Transmitter–Receiver): XT Telemetry
Response (Receiver–Servo): NORMAL
# Compatible receiver: KR-420XT, KR-242XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
*If you use Li-fe, Li-po, you must use with our option unit (Battery stand Unit).
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Made in Japan
Basic Model with a Simple Configuration
This is the basic model of the "EX-NEXT" series, which features ultra-high-speed response enabled by XT technology. By minimizing exterior decoration, we have successfully reduced costs, allowing us to offer this renewed version at a more affordable price. The specifications and functions of the unit remain unchanged, so you can enjoy the high-end performance with ease.
Equipped with a new standard "XT" that achieves the fastest communication speed in the industry.
EX-NEXT features the newly implemented “XT” system, an evolution beyond the conventional “FHSS.” You can choose between “XT Advanced Mode” for ultra-high-speed response and “XT Telemetry Mode” for bi-directional communication (telemetry) support.
XT Advanced Mode
EX-NEXT has been newly developed with a complete redesign of both its control and communication systems from the ground up. It achieves industry-leading communication speed and ultra-high-resolution precision. In its fastest response mode, "XT Advanced Mode," EX-NEXT delivers approximately three times the communication speed compared to the EX-RR. This performance surpasses even the previously fastest HCS mode.
High-speed communication in the XT advanced mode improves the information density that will be sent to the receivers.
You will feel a "Fine and smooth maneuvering feeling" by unprecedented high-definition and high-resolution control when operating.
*When using the ultra-high-speed XT Advanced Mode, please combine it with either serial-compatible servo “4S” or HCS-compliant "RSx3/BSx3" series servos. Due to the extremely fast communication cycle of the XT Advanced Mode, general servos might experience limitations in their operating angles.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
XT Telemetry mode
EX-NEXT is equipped with telemetry (bi-directional communication) functionality. By connecting a serial-compatible “4S” servo to the B/S port of the KR-242XT, “REAL TIME ICS” becomes available. This allows you to adjust servo parameters directly from the transmitter without needing to retrieve the machine. Now you can achieve more refined and uncompromising setups with greater freedom than ever before.
Also, even using the XT Telemetry mode that is 2-way communication, the High-speed response is still faster thanthe EX-RR.
High speed supported by Serial servo.
Currently mainstream servo control method is performed by PWM control. PWM control method uses pulse width to send position of servos output from receiver. Serial control method uses a digital signal value to send the position of the servo output. So, communication speed of the Serial control method will be significantly faster than a PWM control method, time ofthe servo’s action from your operation input is shorter. Operating feeling will be ultra high speed like operating thecar directly.
<Compatible servos> RSx4S / BSx4S Series
*Servo is sold separately.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
Supported HCS.
EX-NEXT & KR-242XT support the use of HCS that was adopted from the RSx3, BSx3 series. Until now, it was necessary to change the receiver mode using the settingdevice, but with EX-NEXT this can be changed from the transmitter for each channel. HCS compatible servos are automatically change to HCS mode when the received signal is HCS. If you want use HCS, please connect servos to 1-4ch ofthe KR-242XT.
WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.