EUR
£ GBP
$ USD
KO EX-NEXT BASIC w/KR-242XT(short) Double Receiver
Brand: KO Propo
Part No: SCH-KO10781
€355.05
RRP €373.74
Out Of Stock
Request Stock NotificationThe KO Propo EX-NEXT BASIC w/KR-242XT (short) Double Receiver set brings the EX-NEXT series’ ultra-fast XT technology to a streamlined, great-value package. Retaining the high-end specifications of the range, this BASIC model focuses on core performance and ease of use, offering precise, smooth control and telemetry capability in a compact 2.4GHz, 4-channel system. Made in Japan.
Key Features
- XT system with a choice of XT Advanced Mode (ultra-high-speed response) and XT Telemetry Mode (bi-directional communication).
- High-definition, high-resolution control for a fine and smooth manoeuvring feel.
- Telemetry via “REAL TIME ICS” when a serial-compatible 4S servo is connected to the KR-242XT B/S port.
- HCS support with mode selection per channel from the transmitter.
- Normal mode available for a wide range of commercially available servos and ESCs.
Specifications
- Dimensions: 240.5 × 163.0 × 107.2 mm (excluding protrusions)
- Weight: 551 g (battery not included)
- Power Supply: 4× AAA dry cells, 4× Ni-MH; Li-Fe 2S 6.6V or Li-Po 2S 7.4V (requires optional Battery Stand Unit). Batteries sold separately.
- Current: 200 mA or less
- Channels: 4ch (PWM/Serial)
- Frequency: 2.4 GHz
- Radio Mode: XT
- Model Memory: 50
Default Settings
- RF Mode (Transmitter–Receiver): XT Telemetry
- Response (Receiver–Servo): Normal
Operating Modes & Notes
- XT Advanced Mode: Supported by the EX-NEXT unit; the included KR-242XT operates in XT Telemetry. For Advanced Mode, use a KR-420XT receiver.
- For ultra-high-speed operation, use serial-compatible “4S” or HCS-compliant RSx3/BSx3 servos. General servos may exhibit reduced travel due to the fast cycle of XT Advanced Mode.
- Normal Mode: Suitable for most servos and ESCs when connected to CH1–4. If switching from Normal to XT Advanced, servo travel may be limited to about 42 degrees; ESC operation is unaffected.
- HCS: Connect HCS-capable servos to CH1–4 on the KR-242XT; compatible servos switch automatically upon HCS signal detection.
- Not compatible with FHSS or DSSS receivers (e.g. KR-418FH, KR-415FHD, KR-210S). LCD Xpansion Unit EXP-104 series is not supported.
Suggested Compatibility
- Receivers: KR-420XT, KR-242XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
- Servos (Serial/HCS): RSx4S / BSx4S, RSx3 / BSx3 series
MINI-Z Support
- Firmware Ver.3.xx enables use with MINI-Z EVO. Combined with MR-04EVO2 and the “MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter (No.82045)”, telemetry adjustments and Advanced Mode are available.
- When using “MINI-Z Mode” with “MINI-Z EVO Receiver Unit EX-NEXT MC-8” and “MR-03”, telemetry and Advanced Mode are not available even with Ver.3.xx.
Part number SCH-KO10781. KO Propo engineering delivers fast, precise control and flexible setup for demanding RC drivers.
Secure Payments
Secured by Stripe
Introducing the KO PROPO EX-NEXT BASIC Transmitter and KR-242XT (Short Antenna) Double Receiver set.
[Specifications]
# Dimensions: 240.5 x163.0 x107.2mm (Does not include protrusions)
# Weight: 551g (battery not included)
# Power supply: AAA size dry battery x4,
Ni-MH battery x4,
Li-Fe battery (2cell 6.6V)*,
Li-Po battery (2cell 7.4V)*,
(Batteries are sold separately.)
# Current: 200mA or less
# Channel: 4ch（PWM/Serial）
# Frequency: 2.4GHz
# Radio Mode: XT
# Model memory 50
# Default Settings:
RF Mode (Transmitter–Receiver): XT Telemetry
Response (Receiver–Servo): NORMAL
# Compatible receiver: KR-420XT, KR-242XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
*If you use Li-fe, Li-po, you must use with our option unit (Battery stand Unit).
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Made in Japan
Basic Model with a Simple Configuration
This is the basic model of the "EX-NEXT" series, which features ultra-high-speed response enabled by XT technology. By minimizing exterior decoration, we have successfully reduced costs, allowing us to offer this renewed version at a more affordable price. The specifications and functions of the unit remain unchanged, so you can enjoy the high-end performance with ease.
Equipped with a new standard "XT" that achieves the fastest communication speed in the industry.
EX-NEXT features the newly implemented “XT” system, an evolution beyond the conventional “FHSS.” You can choose between “XT Advanced Mode” for ultra-high-speed response and “XT Telemetry Mode” for bi-directional communication (telemetry) support.
XT Advanced Mode
EX-NEXT has been newly developed with a complete redesign of both its control and communication systems from the ground up. It achieves industry-leading communication speed and ultra-high-resolution precision. In its fastest response mode, "XT Advanced Mode," EX-NEXT delivers approximately three times the communication speed compared to the EX-RR. This performance surpasses even the previously fastest HCS mode.
High-speed communication in the XT advanced mode improves the information density that will be sent to the receivers.
You will feel a "Fine and smooth maneuvering feeling" by unprecedented high-definition and high-resolution control when operating.
*When using the ultra-high-speed XT Advanced Mode, please combine it with either serial-compatible servo “4S” or HCS-compliant "RSx3/BSx3" series servos. Due to the extremely fast communication cycle of the XT Advanced Mode, general servos might experience limitations in their operating angles.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
XT Telemetry mode
EX-NEXT is equipped with telemetry (bi-directional communication) functionality. By connecting a serial-compatible “4S” servo to the B/S port of the KR-242XT, “REAL TIME ICS” becomes available. This allows you to adjust servo parameters directly from the transmitter without needing to retrieve the machine. Now you can achieve more refined and uncompromising setups with greater freedom than ever before.
Also, even using the XT Telemetry mode that is 2-way communication, the High-speed response is still faster thanthe EX-RR.
High speed supported by Serial servo.
Currently mainstream servo control method is performed by PWM control. PWM control method uses pulse width to send position of servos output from receiver. Serial control method uses a digital signal value to send the position of the servo output. So, communication speed of the Serial control method will be significantly faster than a PWM control method, time ofthe servo’s action from your operation input is shorter. Operating feeling will be ultra high speed like operating thecar directly.
<Compatible servos> RSx4S / BSx4S Series
*Servo is sold separately.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
Supported HCS.
EX-NEXT & KR-242XT support the use of HCS that was adopted from the RSx3, BSx3 series. Until now, it was necessary to change the receiver mode using the settingdevice, but with EX-NEXT this can be changed from the transmitter for each channel. HCS compatible servos are automatically change to HCS mode when the received signal is HCS. If you want use HCS, please connect servos to 1-4ch ofthe KR-242XT.
<Compatible Servo> RSx3 / BSx3 / RSx4S / BSx4S Series
NORMAL mode (For commercially available servos and ESCs)
You can use different kinds of servos by changing the response mode to "Normal mode". So, you can use most current servos and ESC with EX-NEXT.
In this case, please connect to 1-4ch of the receiver.
*If you change the response mode of EX-NEXT from NORMAL to XT advanced mode in the radio settings, the maximum movement degrees of servos are limit to maximum about 42 degrees and will change. So, if you use NORMAL mode were commended setting to XT telemetry mode in the radio setting. In case of using an ESC, there is no chance of using over a travel limit, so there is no problem using with XT advanced mode.
Firmware Ver.3.00 compatible with MINI-Z
Firmware Ver.3.xx is released to use MINI-Z EVO with EX-NEXT. By combining it with MR-04EVO2 and "MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter (No.82045)", you can use the "telemetry function" that allows you to adjust settings from the radio, and the "advanced mode" that allows faster communication.
If you already have EX-NEXT
If you already have EX-NEXT, you can update it to Ver. 3.xx to make it compatible with MINI-Z EVO. Please download the software and files necessary for uploading from the following links. *The ICS USB Adapter HS is required for the update.
"EX-NEXT Updater, Update file"
*"MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter (No.82045)" is not included in this set.
*When using "MINI-Z Mode" and "MINI-Z EVO Receiver Unit EX-NEXT MC-8" and "MR-03", telemetry function and advanced mode cannot be used even if EX-NEXT is updated to Ver. 3.xx.
Key Info:Part No : SCH-KO10781Barcode : 5051294201814
[Specifications]
# Dimensions: 240.5 x163.0 x107.2mm (Does not include protrusions)
# Weight: 551g (battery not included)
# Power supply: AAA size dry battery x4,
Ni-MH battery x4,
Li-Fe battery (2cell 6.6V)*,
Li-Po battery (2cell 7.4V)*,
(Batteries are sold separately.)
# Current: 200mA or less
# Channel: 4ch（PWM/Serial）
# Frequency: 2.4GHz
# Radio Mode: XT
# Model memory 50
# Default Settings:
RF Mode (Transmitter–Receiver): XT Telemetry
Response (Receiver–Servo): NORMAL
# Compatible receiver: KR-420XT, KR-242XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
*If you use Li-fe, Li-po, you must use with our option unit (Battery stand Unit).
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Made in Japan
Basic Model with a Simple Configuration
This is the basic model of the "EX-NEXT" series, which features ultra-high-speed response enabled by XT technology. By minimizing exterior decoration, we have successfully reduced costs, allowing us to offer this renewed version at a more affordable price. The specifications and functions of the unit remain unchanged, so you can enjoy the high-end performance with ease.
Equipped with a new standard "XT" that achieves the fastest communication speed in the industry.
EX-NEXT features the newly implemented “XT” system, an evolution beyond the conventional “FHSS.” You can choose between “XT Advanced Mode” for ultra-high-speed response and “XT Telemetry Mode” for bi-directional communication (telemetry) support.
XT Advanced Mode
EX-NEXT has been newly developed with a complete redesign of both its control and communication systems from the ground up. It achieves industry-leading communication speed and ultra-high-resolution precision. In its fastest response mode, "XT Advanced Mode," EX-NEXT delivers approximately three times the communication speed compared to the EX-RR. This performance surpasses even the previously fastest HCS mode.
High-speed communication in the XT advanced mode improves the information density that will be sent to the receivers.
You will feel a "Fine and smooth maneuvering feeling" by unprecedented high-definition and high-resolution control when operating.
*When using the ultra-high-speed XT Advanced Mode, please combine it with either serial-compatible servo “4S” or HCS-compliant "RSx3/BSx3" series servos. Due to the extremely fast communication cycle of the XT Advanced Mode, general servos might experience limitations in their operating angles.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
XT Telemetry mode
EX-NEXT is equipped with telemetry (bi-directional communication) functionality. By connecting a serial-compatible “4S” servo to the B/S port of the KR-242XT, “REAL TIME ICS” becomes available. This allows you to adjust servo parameters directly from the transmitter without needing to retrieve the machine. Now you can achieve more refined and uncompromising setups with greater freedom than ever before.
Also, even using the XT Telemetry mode that is 2-way communication, the High-speed response is still faster thanthe EX-RR.
High speed supported by Serial servo.
Currently mainstream servo control method is performed by PWM control. PWM control method uses pulse width to send position of servos output from receiver. Serial control method uses a digital signal value to send the position of the servo output. So, communication speed of the Serial control method will be significantly faster than a PWM control method, time ofthe servo’s action from your operation input is shorter. Operating feeling will be ultra high speed like operating thecar directly.
<Compatible servos> RSx4S / BSx4S Series
*Servo is sold separately.
*Although the EX-NEXT main unit is equipped with XT Advanced Mode, the included KR-242XT is for XT Telemetry only. To use XT Advanced Mode, please prepare a separate KR-420XT.
Supported HCS.
EX-NEXT & KR-242XT support the use of HCS that was adopted from the RSx3, BSx3 series. Until now, it was necessary to change the receiver mode using the settingdevice, but with EX-NEXT this can be changed from the transmitter for each channel. HCS compatible servos are automatically change to HCS mode when the received signal is HCS. If you want use HCS, please connect servos to 1-4ch ofthe KR-242XT.
<Compatible Servo> RSx3 / BSx3 / RSx4S / BSx4S Series
NORMAL mode (For commercially available servos and ESCs)
You can use different kinds of servos by changing the response mode to "Normal mode". So, you can use most current servos and ESC with EX-NEXT.
In this case, please connect to 1-4ch of the receiver.
*If you change the response mode of EX-NEXT from NORMAL to XT advanced mode in the radio settings, the maximum movement degrees of servos are limit to maximum about 42 degrees and will change. So, if you use NORMAL mode were commended setting to XT telemetry mode in the radio setting. In case of using an ESC, there is no chance of using over a travel limit, so there is no problem using with XT advanced mode.
Firmware Ver.3.00 compatible with MINI-Z
Firmware Ver.3.xx is released to use MINI-Z EVO with EX-NEXT. By combining it with MR-04EVO2 and "MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter (No.82045)", you can use the "telemetry function" that allows you to adjust settings from the radio, and the "advanced mode" that allows faster communication.
If you already have EX-NEXT
If you already have EX-NEXT, you can update it to Ver. 3.xx to make it compatible with MINI-Z EVO. Please download the software and files necessary for uploading from the following links. *The ICS USB Adapter HS is required for the update.
"EX-NEXT Updater, Update file"
*"MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter (No.82045)" is not included in this set.
*When using "MINI-Z Mode" and "MINI-Z EVO Receiver Unit EX-NEXT MC-8" and "MR-03", telemetry function and advanced mode cannot be used even if EX-NEXT is updated to Ver. 3.xx.
Key Info:
- Brand
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.