Your Cart: $0.00

Spend $134.00 more for free shipping!

View Cart and Checkout
FLX-10 3S802 Flux ESC with XT60

FLX-10 3S802 Flux ESC with XT60

Brand: HPI

Part No: HPI-160942

$71.17 RRP $74.92

In Stock: Usually ships same day

Collect Instore

The HPI FLX-10 3S802 Flux ESC with XT-60 (HPI-160942) delivers up to 80A continuous current for powerful 1/10th scale brushless performance. It pairs robust power delivery with dependable protection features to enable high speeds, big stunts, and confident control.

Complete waterproof protection lets you keep running through puddles and mud, while a large cooling fan under a protective cover helps maintain temperatures during hard driving in warm weather.

Key Features

  • 80A continuous output for strong 1/10th scale brushless setups
  • Waterproof protection for all-weather running
  • Cooling fan housed under a protective cover
  • Overheat and low voltage protection
  • 6V switching BEC, 3A continuous
  • XT60 battery connector and 4.0mm motor bullet connectors
  • Programmable using the Hobbywing LED Program Card
  • Suggested compatibility: HPI FLX10-3660-3700KV 1/10 brushless motor

Technical Specifications

  • Input voltage: 2–3S LiPo
  • Continuous current: 80A
  • Motor limit: 2S LiPo < 6000KV; 3S LiPo < 3700KV
  • BEC: 6V switching, 3A continuous
  • Battery connector: XT60
  • Motor connector: 4.0mm bullet
  • Dimensions: 46 x 36.5 x 35.5mm
  • Application: 1/10th

Battery Guidance

For best performance, use high-quality, suitably rated LiPo batteries. Using low-rated or lower quality packs may cause damage to the batteries and/or ESC and could affect warranty coverage.

Wet Use Guidance

  • Ensure other onboard electronics are water-resistant or fully enclosed before running in wet conditions.
  • ESC fans are not water-resistant: disconnect the fan before wet running and allow it to dry fully before reconnecting.
  • Lubricate exposed metal drivetrain parts (bearings, outdrives, diff shafts) before wet use.
  • Motors are not intended for submerged use.
  • After wet running, rinse off dirt and corrosive residues (e.g. saltwater) with plain water and re-lubricate metal drivetrain parts.
#160942 - FLX-10 3S802 Flux ESC with XT-60

The FLX10-3S802 Flux ESC is the perfect match for the FLX10-3660-3700KV 1/10th scale brushless motor - it's able to pump up to 80 amps of power to the motor for amazing stunts, colossal top speeds, and wheel-spinning sideways action!

Complete waterproof protection means you can take your truck equipped with the FLX10-3S802 ESC into territory that would scare off other drivers: puddles, mud, and more! A large fan sits on top of the case inside a protective cover to keep things cool when the weather's warm and you've been driving hard.

Technical Specifications:
Input Voltage: 2-3S LiPo
Continuous Current: 80A
Motor Limit: 2S LiPo <6000KV, 3S <3700KV
BEC: 6V Switching BEC, 3A Continuous Current
Battery Connector: XT60
Motor Connector: 4.0mm Bullet
Dimensions: 46x36.5x35.5mm
Application: 1/10th
Overheat Protection
Low Voltage Protection

Can be programmed using the Hobbywing LED Program Card

The FLX10-3S802 ESC & FLX10-3660-3700KV Motor requires very powerful batteries to get the most out of them - please make sure that you use the right combination! HPI highly recommend the use of high-quality LiPo batteries. Using batteries with low ratings, or the use of lower quality LiPo batteries, may cause damage to your batteries and/or speed control. Using batteries below the specified ratings may void the warranty of the speed controller and/or batteries.

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend disconnecting the fan from the ESC before driving in wet conditions and allowing it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when underwater. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.



Key Info:
  • Brand: HPI
  • Part No: HPI-160942
  • Barcode: 5050864035484
Standard Shipping

£3.95 to most of the UK

Express Shipping

£6.95 to most of the UK

Worldwide Shipping

Available at checkout

Reviews
No specific product reviews yet, why not write one?
WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

For more in depth queries, please contact us.