USD
£ GBP
€ Euro
Hobbywing EZRUN MAX8 V3 150A ESC - Traxxas Connector
Brand: Hobbywing
Part No: HW30103201
THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
PLEASE SEE ITEM #HW30103200 AS A REPLACEMENT
The Hobbywing EZRUN MAX8 V3 150A ESC - Traxxas Connector (HW30103201) is a robust, waterproof brushless speed controller for 1/8 scale trucks and buggies. Built on reliable hardware with advanced protection software, it delivers strong punch and stable output for aggressive launches, wheelies and high-speed runs, while safeguarding itself against overload.
Designed to minimise upkeep, the MAX8 features an anti-shock cooling fan and an electronic power switch that is waterproof, dust-proof and shock-resistant. A powerful, switchable BEC (6V/7.4V) supports standard and high-voltage servos for precise control. With flexible parameter adjustment, you can tailor start-up behaviour from smooth and soft to hard-hitting.
Key Features
- High reliability and durability with advanced protection algorithms
- Flexible tuning for smooth or aggressive start-up and throttle response
- Fully waterproof and dust-proof construction for all-weather running
- Electronic switch with long service life and shock-resistant design
- Switchable BEC output (6V/7.4V) for standard and HV servos
- Anti-shock fan and near maintenance-free operation
- Plug-and-play setup with Traxxas (TRX) input connector
- WiFi module supported for convenient programming
Specification
- Scale: 1/8
- Motor Type: Brushless (sensorless)
- Waterproof: Yes
- Continuous/Peak Current: 150A / 950A
- Battery Input: 3–6S LiPo or 9–18 cell NiMH
- BEC Output: Switch mode, 6V/7.4V, 6A
- Input Connector: Traxxas plug (TRX)
- Input Wires: 10AWG – Red 200mm x1, Red 150mm x1, Black 150mm x1
- Output Wires: 10AWG – Black 200mm x3
- Motor Connectors: 6.5mm female gold connectors (pre-soldered to PCB)
- Cooling Fan: 30 x 30 x 10mm, 5–7.4V
- Program Port: Fan/Program port; WiFi module supported
- Size: 59.8 x 48.0 x 36.8mm
- Weight: 174g
Suggested Compatibility
- Traxxas E‑REVO
- Traxxas E‑MAXX
- HPI Savage
- Thunder Tiger E‑MAT
- Other 1/8 scale trucks and buggies (as applicable)
Secured by Stripe
HOBBYWING EZRUN MAX8-V3-TRX PLUG SPEED CONTROL
The MAX8 ESC provides the optimal upgrade solution for many popular 1/8th scale monster trucks like TRAXXAS E-REVO & E-MAXX, HPI SAVAGE, and THUNDER TIGER E-MAT. It’s also applicable to other trucks and buggies. The whole ESC except the cooling fan is basically maintenance free. Besides, the fan has also adopted the special anti-shock design, reduced damage brought by frequent jumps of the vehicle, greatly reduced maintenance work to the fan.
Reliable hardware combined with advanced software allows the ESC to not only provide extremely high output but also protect itself timely from damages caused by overload. It significantly reduces the possibility of getting damaged by heavy load and improves the reliability and durability.
The ESC has strong outbreak and stable output, so vehicle can do different moves without a problem, no matter aggressive start-up and wheelie, 720-degree flip (note 1), high speed running on straight tracks or flying over slopes. It always provide the power more than sufficient. Besides, driver can adjust relevant parameters for smooth and soft start-up.
The world’s 1st 1/8th scale ESC adopted the super built-in BEC with the max. output current of up to 15A and switchable output voltage (6V/7.4V). It can drive different servos, high voltage servos at ease and bring amazing control feel to drivers. The electronic switch with the lifespan of over 50000 times of switching on & off features a completely waterproof, dust-proof and shock-resistant design, completely solved problems like stuck reed and rust contact points caused by dust and moisture, switching off automatically caused by violent dash (like landing after flying over slopes) conventional mechanical switches often have.
Outstanding waterproof and dust-proof capability makes the MAX8 applicable to all weather conditions, no matter the track is covered with dust, gravel, snow or puddles.
HobbyWing EzRun MAX8 V3 Features:
- High Reliability & Durability
- Great Flexibility & Versatility
- Advanced and Secure Electronic Switch
- Applicable to All Weather Conditions
- Super Built-in BEC
- Plug and Play
- Almost Maintenance Free
Spec Check:
- Scale: 1/8th
- Brushed/Brushless:BL
- Sensored/Sensorless: SL
- Waterproof: Yes
- Cont./Peak Current: 150A/950A
- Input: 3-6S LiPo/9-18 Cells NiMH
- BEC Output: Switch Mode:6V/7.4V,6A
- Input Wires: Red-10AWG-200mm*1/Red-10AWG-150mm*1/Black-10AWG-150mm*1
- Output Wires: Black-10AWG-200mm*3
- Input Connectors: T Plug/Traxxas Plug
- Output Connecotors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)
- Fan Size: 30.0x30.0x10.0mm
- Fan Voltage Range: 5-7.4V
- WiFi Module: Supported
- Program Port: FAN/Program Port
- Size: 59.8x48.0x36.8mm
- Weight: 174g
Key Info:
- Brand: Hobbywing
- Part No: HW30103201
- Barcode: 6938994405362
- Motor Type: Brushless
- LiPo Compatible: Yes
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.