USD
£ GBP
€ Euro
KO EX-NEXT LDT BASIC w/MINI-Z EVO2 Double receiver
Brand: KO Propo
Part No: SCH-KO10789
$400.98
RRP $422.09
Out Of Stock
Request Stock NotificationThe KO Propo EX-NEXT LDT Basic (SCH-KO10789) is a streamlined, high-performance 2.4GHz transmitter featuring XT technology for ultra-fast response and telemetry. This Basic model reduces exterior ornamentation to keep costs down while preserving full EX-NEXT performance. It includes 2 x MINI-Z EVO2 receiver units and firmware Ver.3.00 pre-set. The Laydown Trigger (LDT) design enhances ergonomics for smooth, linear throttle and brake control, and the set supports telemetry and high-speed Advanced Mode via suggested compatibility with MR-04EVO2. Made in Japan.
What’s Included
- EX-NEXT LDT Basic 2.4GHz transmitter (Firmware Ver.3.00)
- 2 x MINI-Z EVO2 Receiver Unit for KO compatible transmitter (No.82045)
- Balance terminal extension cable (XH, 3-pin)
Key Features
- Laydown Trigger (LDT) for ergonomic, highly linear control; adjustable for smaller hands
- XT radio technology with ultra-high-speed response and telemetry
- Telemetry and 0.99 ms Advanced Mode via suggested compatibility with MINI-Z EVO2/MR-04EVO2
- Charge-in-stand capability using the included balance lead (no need to remove the battery)
- 50-model memory and 4-channel (PWM/Serial) control
- Made in Japan
Specifications
- Dimensions: 256.0 × 170.0 × 127.5 mm (excluding protrusions)
- Weight: 563 g (battery not included)
- Power supply: AAA dry battery x4, Ni-MH x4, Li-Fe 2S 6.6V*, Li-Po 2S 7.4V* (batteries sold separately)
- Current: 200 mA or less
- Channels: 4ch (PWM/Serial)
- Frequency: 2.4GHz; Radio Mode: XT
- Model memory: 50
- Compatible battery size (maximum): 88 × 18 × 32 cm
Default Settings
- RF Mode (Transmitter–Receiver): XT Telemetry
- Response (Receiver–Servo): NORMAL
Suggested Compatibility
- Receivers: KR-420XT, MINI-Z EVO2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
Notes
- Not suggested for use with LCD Xpansion Unit EXP-104 series
- Not suggested for use with FHSS or DSSS receivers (KR-418FH, KR-415FHD, KR-210S, etc.)
- Do not charge the battery with the power on
- Photos may show prototypes
Secure Payments
Secured by Stripe
Introducing the KO PROPO EX-NEXT LDT Basic with 2 x MINI-Z EVO2 Receiver.
<Includes Includes MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter>
[Specifications]
# Dimensions:256.0×170.0×127.5mm（Does not include protrusions）
# Weight: 563g（battery not included ）
# Power supply: AAA size dry battery x4,
Ni-MH battery x4,
Li-Fe battery (2cell 6.6V)*,
Li-Po battery (2cell 7.4V)*,
(Batteries are sold separately.)
# Current: 200mA or less
# Channel: 4ch (PWM/Serial)
*Maximum setting ID number of serial are different by each products.
# Frequency: 2.4GHz
# Radio Mode: XT
# Model memory 50
# Default Settings:
RF Mode (Transmitter–Receiver): XT Telemetry
Response (Receiver–Servo): NORMAL
# Compatible receiver: KR-420XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
*Do not charge the battery with the power on.
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Made in Japan
Basic Model with a Simple Configuration
This is the basic model of the "EX-NEXT" series, which features ultra-high-speed response enabled by XT technology. By minimizing exterior decoration, we have successfully reduced costs, allowing us to offer this renewed version at a more affordable price. The specifications and functions of the unit remain unchanged, so you can enjoy the high-end performance with ease.
Equipped with Lay Down Trigger (LDT)!
A new idea to lay down the operation axis of the trigger by 90 degrees. This sensation that you can squeeze and press naturally with your fingertips. Ergonomic design that does not disturb the movement of the fingers realizes a seamless and highly linear operation feeling over the entire stroke. Makes accelerator work and braking smoother and more enjoyable. "LDT" is born, which seems to improve Dora Tech for both one and two ranks. This appearance, which is also focused on the quality of operation feeling, takes you to a new dimension. Also, this is adjustable for using by children who has small hands * There are limit by Hand size.
Charge battery by connecting to stand
Balance terminal extension cable is included. You can charge the battery without removing the battery from the transmitter.
*This compatible connecttor is XH (3 pins).* Compatible Battery size (Maximum):88x18x32cm
MINI-Z compatible telemetry function & advanced mode.
This is a transmitter/receiver set that comes with the receiver unit "MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter (No.82045)" compatible with MINI-Z EVO2.
By combining it with MR-04EVO2, you can use the "telemetry function" that allows you to adjust settings from the radio, and the "advanced mode" that allows faster communication.
[New feature: 1] Bidirectional telemetry mode
Various setting values that have been previously set on a PC can be easily set from the radio by operating the buttons on the expansion unit, just as if changing the settings on the radio. Additionally, EX-NEXT's telemetry function can read machine information. Not only each setting value but also the machine's battery voltage can be read out in real time.
[New feature: 2] High-speed advanced mode
EVO2 allows you to use high-speed advanced mode (0.99ms)! Advanced mode's high-speed communication increases the density of information that can be sent to the machine. You can experience the "fine and smooth handling feeling" brought about by unprecedented high-definition and high-resolution control.
Firmware Ver.3.00 compatible with MINI-Z EVO2.
Firmware Ver.3.00 has been released to use MINI-Z EVO2 with EX-NEXT. EX-NEXT of this set is preset to Ver.3.00.
If you already have EX-NEXT
If you already have an EX-NEXT, you can update it to Ver.3.00 to make it compatible with MINI-Z EVO. Please download and use the software and files required for uploading from the link below. *A separate ICS USB Adapter HS is required for the update.
"Updater for EX-NEXT, update file"
<Includes Includes MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter>
[Specifications]
# Dimensions:256.0×170.0×127.5mm（Does not include protrusions）
# Weight: 563g（battery not included ）
# Power supply: AAA size dry battery x4,
Ni-MH battery x4,
Li-Fe battery (2cell 6.6V)*,
Li-Po battery (2cell 7.4V)*,
(Batteries are sold separately.)
# Current: 200mA or less
# Channel: 4ch (PWM/Serial)
*Maximum setting ID number of serial are different by each products.
# Frequency: 2.4GHz
# Radio Mode: XT
# Model memory 50
# Default Settings:
RF Mode (Transmitter–Receiver): XT Telemetry
Response (Receiver–Servo): NORMAL
# Compatible receiver: KR-420XT, MINI-Z EVO 2 receiver unit for KO compatible transmitter, MINI-Z EVO Receiver Unit EX-NEXT MC-8
*Do not charge the battery with the power on.
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Made in Japan
Basic Model with a Simple Configuration
This is the basic model of the "EX-NEXT" series, which features ultra-high-speed response enabled by XT technology. By minimizing exterior decoration, we have successfully reduced costs, allowing us to offer this renewed version at a more affordable price. The specifications and functions of the unit remain unchanged, so you can enjoy the high-end performance with ease.
Equipped with Lay Down Trigger (LDT)!
A new idea to lay down the operation axis of the trigger by 90 degrees. This sensation that you can squeeze and press naturally with your fingertips. Ergonomic design that does not disturb the movement of the fingers realizes a seamless and highly linear operation feeling over the entire stroke. Makes accelerator work and braking smoother and more enjoyable. "LDT" is born, which seems to improve Dora Tech for both one and two ranks. This appearance, which is also focused on the quality of operation feeling, takes you to a new dimension. Also, this is adjustable for using by children who has small hands * There are limit by Hand size.
Charge battery by connecting to stand
Balance terminal extension cable is included. You can charge the battery without removing the battery from the transmitter.
*This compatible connecttor is XH (3 pins).* Compatible Battery size (Maximum):88x18x32cm
MINI-Z compatible telemetry function & advanced mode.
This is a transmitter/receiver set that comes with the receiver unit "MINI-Z EVO 2 Receiver Unit for KO Compatible Transmitter (No.82045)" compatible with MINI-Z EVO2.
By combining it with MR-04EVO2, you can use the "telemetry function" that allows you to adjust settings from the radio, and the "advanced mode" that allows faster communication.
[New feature: 1] Bidirectional telemetry mode
Various setting values that have been previously set on a PC can be easily set from the radio by operating the buttons on the expansion unit, just as if changing the settings on the radio. Additionally, EX-NEXT's telemetry function can read machine information. Not only each setting value but also the machine's battery voltage can be read out in real time.
[New feature: 2] High-speed advanced mode
EVO2 allows you to use high-speed advanced mode (0.99ms)! Advanced mode's high-speed communication increases the density of information that can be sent to the machine. You can experience the "fine and smooth handling feeling" brought about by unprecedented high-definition and high-resolution control.
Firmware Ver.3.00 compatible with MINI-Z EVO2.
Firmware Ver.3.00 has been released to use MINI-Z EVO2 with EX-NEXT. EX-NEXT of this set is preset to Ver.3.00.
If you already have EX-NEXT
If you already have an EX-NEXT, you can update it to Ver.3.00 to make it compatible with MINI-Z EVO. Please download and use the software and files required for uploading from the link below. *A separate ICS USB Adapter HS is required for the update.
"Updater for EX-NEXT, update file"
WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.