The latest addition to our high-end Nitro competition engine line is also the most massive. It offers torque that you’ll hardly be able to handle. The XTEC PowerCarb3 15S-2 carburettor was designed to for maximum power and easy adjustability at the same time.The cooling head’s new cooling fan
The latest addition to our high-end Nitro competition engine line is also the most massive. It offers torque that you’ll hardly be able to handle. The XTEC PowerCarb3 15S-2 carburettor was designed to for maximum power and easy adjustability at the same time.The cooling head’s new cooling fan arrangement will create improved cooling and consequently higher efficiency.
The engine fits all major 21. Engine mounts and the standard burn room guarantees easy adjustment of the engine in all conditions.
All LRP ZR.32X Spec.4 engines come equipped with a free LRP Platinum / Iridium R5 glow plug.
FEATURES
MASSIVE Big Block size - You cannot replace displacement with anything… but even more displacement!
New CoolDownMax cylinder head - Improved cooling and higher efficiency through new cooling fin arrangement
XTEC PowerCarb3 15S-2 carburettor - Thermal protected carburettor with 7.5mm, 8.5mm and 9.0mm inserts for maximum power and easy adjustability at the same time
Universal fit - Fits all major .21 engine mounts
FREE PLUG - FREE LRP Platinum / Iridium R5 glow plug included
7 + 1 Ports
Torque you can barely handle
Standard burn room - Guarantees easy adjustment of the engine in all conditions
Extra reinforced con rod - Specially adjusted for .32 engines
XTEC T6 engine housing - Especially reinforced heavy duty engine housing for toughest offroad action
TECHNICAL DATA
Cubic capacity .32 (5.24 ccm)
Bore 19.80mm
Hub 17.00mm
Power 4.59 HP
RPM 34.900 RPM
Number of ports 7 + 1
Glow Plug LRP Standard R5 (LRP35051)
Carburetor XTEC PowerCarb3 15S-2 carburettor, Aluminium 7.5mm, 8.5mm, 9.0mm
Weight 345g
Class 1/8th Offroad Buggys/Truggys
*Figures may vary depending on used fuel, muffler and tuning
- Brand: LRP
- Part No: SCH-LRP32825
- Barcode: 5051294140519
- Displacement: 5.2cc (0.32ci)
- Starter: Flywheel Start
Two Simple UK Delivery Options
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
We Ship Worldwide!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
No product reviews yet!
Hi I’m interested in this but I see it doesn’t have a fly wheel or clutch bell.
I want to put it in a savage x and use a 14t clutch bell would you be able to fit the parts to make it complete if I pay for the parts??
Asked by Peter on 27th May 2019
Yes - most engines are supplied without clutch/flywheel, etc as these items are deemed part of the car rather than the engine.
This should fit a Savage no problem.
Answered by: Ben @ Wheelspin Models
Could I fit a pullstart to this engine ?
Asked by Matt on 1st March 2020
I don’t think you can fit one directly to that model.
There is a pullstart version of that engine which we sell: LRP32821
Then there is a pullstarter replacement: LRP38556
Answered by: Ben @ Wheelspin Models
How do you start it ?
Asked by Andrew on 7th April 2020
These are flywheel start
Answered by: Ben @ Wheelspin Models
I see you can get stock of the lrp32x
I want to fit into my savage xl. Not keen on the original engine.
I see this doesn’t come with a pull start. Do you do the system to start it as well cheers
Mike
Asked by Michael Walford on 28th April 2020
This one does not have a pullstart but check out LRP32811 or LRP32821 which do
Answered by: Ben @ Wheelspin Models
Hi
Do you have lrp 32 spec 4 with pullstart not the competition
Asked by Martin on 9th June 2020
That's SCH-LRP32821
Answered by: Ben @ Wheelspin Models
Hi I am interested about this engine and I want to ask if there is a pullstart for this ,I need also a backplate?
Asked by George Michalakopoulos on 17th December 2020
If you're after a pullstart engine then I'd go for LRP32821
Answered by: Ben @ Wheelspin Models
would this be a good choice for an mp9 ?
Asked by Casey Fortune on 19th December 2020
Yes that should work well in there
Answered by: Ben @ Wheelspin Models
Hi , do you sell all the nessersery items to get this to run ie backplate clucth clutch bell flywheel etc also woudk this fit into a hyper ss truggy
Asked by Bradley Milton on 11th January 2021
Yes, those items are however dependent on your buggy.
Something like AB-2300007 should get you up and running - then just a clutch bell to suit your truck
Answered by: Ben @ Wheelspin Models
Can you recommend an exhaust for this engine?
Asked by Mat on 28th January 2021
That would depend a little on your car, but some popular options would be say PIC9589 or H86220 or LRP36255
Answered by: Ben @ Wheelspin Models
Hi I am looking to put this into an old traxxas tmax I have. I upgraded the tmax in the past and it was running a dynamite .26 I had to upgrade some of the gearbox to metal components as it was way to much for the plastic parts. Could you tell me if this one would be a good replacement for the dynamite engine as I can’t seem to find a .26 replacement anymore?
Asked by Chris on 11th February 2021
If you already have a big block kit in there, then I'd imagine this will fit.
If you have the TRX 2.5 / 3.3 style mount however - these will be too large
Answered by: Ben @ Wheelspin Models
I'm looking at buying the Lrp32 engine without a pull start, could you advise me whether I can get a rotostart to fit it please. If you have an item number/link, I'd be grateful. Thankyou.
Asked by Ben Turner on 15th March 2021
Afraid not - I don't know of a roto that would fit these.
Answered by: Ben @ Wheelspin Models
Is the flexible pipe exhaust manifold available that fits this engine?
Asked by Ben Mayhew on 14th April 2021
These are standard .21 size rear exhausts, so if you have a flexi manifold it'll likely fit this.
Answered by: Ben @ Wheelspin Models
What flywheel and clutch would I need for this
Asked by Chris Downes on 6th June 2021
These would take most standard clutch setups.
The REDMUQU0063 would be nice for example
Answered by: Ben @ Wheelspin Models
I have the hobao hyper vt 30, will this engine drop in without any mods? ie exhaust, flywheel
,clutch.
Regards Lee.
Asked by Lee Demmon on 6th April 2022
Yes this should fit and use your existing parts
Answered by: Si @ Wheelspin Models
Will this engine give better performance than my hobao hyper 30?
Asked by Lee Demmon on 6th April 2022
This is a race spec engine so would have better build quality etc, but performance depends on the tuning of the engine.
Answered by: Si @ Wheelspin Models
