LiPo batteries are the latest craze to hit the RC scene and provide approximately 20% more runtime and power than comparable NiCd/NiMh batteries.
![]() | 1 x HPI Plazma 1.5V Alkaline AA Battery (4Pcs) #HPI-101939 |
![]() | 1 x eTronix Deans Charge Lead (4mm Connectors) #ET0268 |
![]() | 2 x Voltz 4000mAh Hard Case LiPo - 7.4v 2S 50C - Deans #VZ0310 |
![]() | 1 x eTronix PowerPal EZ-4 50W LiPo Charger #ET0225 |
saving you £106.15 over RRP!
LiPo batteries are the latest craze to hit the RC scene and provide approximately 20% more runtime and power than comparable NiCd/NiMh batteries.
![]() | 1 x HPI Plazma 1.5V Alkaline AA Battery (4Pcs) #HPI-101939 |
![]() | 1 x eTronix Deans Charge Lead (4mm Connectors) #ET0268 |
![]() | 2 x Voltz 3600mah Hard Case Low Profile 3S 11.1V 40C LiPo Pack - Deans #VZ0341 |
![]() | 1 x eTronix Powerpal 3.0 AC/DC Performance Charger/Discharger - 80W 10A #ET0202 |
saving you £107.55 over RRP!
The HPI Vorza Flux blends the blistering performance weve come to expect from nitro powered vehicles with the plug and play convenience of electric power.
Powered by the awesome HPI Flux Blur ESC and Tork motor, taken from the ballistic Savage Flux HP, simply add your choice of battery packs and nail the throttle for the most intense RC experience of your life!
Supplied in Ready to Run form, the HPI Vorza Flux requires no major assembly so you can be out ripping up your backyard in minutes.
HPI Vorza Flux 2.4Ghz Features:
For more information, why not check out the HPI Vorza Flux at HPI Europe
Note, twin HPI Plazma 11.1v batteries do fit the Vorza, but may rub require slight modification to the battery tray.
This item is over £100, so qualifies for free standard UK shipping!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
Yes, this includes the Transmitter and Receiver. Just add batteries and charger.
Answered by: Ben @ Wheelspin Models
The Vorza comes with the TF-40 radio system.
Answered by: Ben @ Wheelspin Models
Yes, you could run a single 6S LiPo if you wish - you'd just need a deans loop connector to close off one port on the ESC.
Answered by: Ben @ Wheelspin Models
Yes, this is Ready to Run and includes a transmitter, receiver, etc. Just add batteries and charger.
Same for the HPI Trophy :-)
Answered by: Ben @ Wheelspin Models
Yes, this has reverse.
Answered by: Ben @ Wheelspin Models
We list all the option parts here: https://wheelspinmodels.co.uk/c/286/?cs=%7B161%3A%5B612%5D%7D
These are designed to run on 6S batteries (2 x 3S packs).
You could likely run on 2 x 2S packs, but I think a single 3S pack will be too low voltage
Answered by: Ben @ Wheelspin Models