GBP
€ Euro
$ USD
Body Post Trimmer - Grey
Brand: Arrowmax
Part No: SCH-AM190042
Shadow Stock: Usually ships within 2 days
The Arrowmax Body Post Trimmer in Grey (AM190042) delivers clean, consistent cuts on RC car body posts. Designed for a professional finish, it helps you achieve equal post lengths and a smooth 1 mm chamfer so your body shell glides on with ease. A sturdy aluminium body and knurled adjuster make setup quick and precise.
Key Features
- Colour: Grey (part number SCH-AM190042 / AM190042)
- Two trimming options: 6 mm or 10 mm, depending on tool orientation
- Adds a precise 1 mm chamfer to body posts
- Knurled screw for accurate blade positioning
- Aluminium body for stability and repeatability
- Neat, uniform results with minimal effort
Step-By-Step Use
- Step 1 – Fit your body shell to set height, remove it, then place the trimmer on the first body post. Select 6 mm or 10 mm by orienting the tool.
- Step 2 – Loosen the knurled screw, insert your cutter knife/scalpel, then tighten until the blade stops at the end of the slot.
- Step 3 – Remove the trimmed top together with the trimmer and repeat for the remaining posts.
- Final cut – Use the stud hole and rotate the trimmer about 360° under light pressure to create a clean 1 mm chamfer.
Important Note
If chamfering is not as expected, adjust the blade gap to approximately 0.2–0.5 mm relative to the edge of the aluminium body.
Secured by Stripe
Available in Black #AM190041, Grey #AM190042 and Purple #AM190040
Preparation
- Fit your body shell to your car and make sure that it’s placed in the correct height
- Remove the body and put it aside, you won’t need it for the post trimming procedure itself!
Body post trimming step by step
Step 1
- Place the Body Post Trimmer on your car’s first body post
- You have two options concerning the length, 6 mm and 10 mm, depending on the orientation of the tool
Step 2
- Turn the knurled screw counter-clockwise just until you can take it out
- Insert your cutter knife / scalpel
- Turn the knurled screw clockwise until the scalpel runs on block at the end of the slot
Step 3
- Now you can remove the cut top of the body post including the Body Post Trimmer
- Congratulation! You have trimmed your first body post! Repeat the procedure with the other body posts on your car!
The final cut
- Place your Body Post Trimmer with the stud hole on the body post
- Turn around the trimmer about 360° under light pressure so that you will cut a perfect 1 mm chamfer
IMPORTANT NOTE: If chamfering doesn’t work as it should, try to change the gap of your blade which should be 0.2 – 0.5 mm to the edge of the aluminium body.
Your results are
- Smooth looking, chamfered body posts without much effort and all have the same length!
Your body shell will easily glide on your car now!
Key Info:
- Brand: Arrowmax
- Part No: SCH-AM190042
- Barcode: 5051294109264
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.