GBP
€ Euro
$ USD
Coming Soon
CEN Reeper SC 1:10 4WD RTR Brushless Truck
Brand: CEN
Part No: CEN9510
£341.99
RRP £359.99
Backorder: Expected 10th August 2026
Request Stock NotificationFinance options available at checkout.
Description
The CEN Racing Reeper SC 1:10 4WD RTR Brushless Truck (CEN9510) delivers tough short course styling with serious brushless power. A full matte black body arrives ready for your choice of two self-apply decal sheets (red and blue), complete with driver and navigator figures and a full-size spare tyre for added scale detail.
Key Features
- Full matte black 1/10 short course body
- Two decal sheets included (Red & Blue)
- Driver & navigator models installed
- Full size spare tyre
- Four-wheel drive
ESC
- BEAST SL G2 80A, water-proof and dust-proof
- 32-bit microprocessor for precise output
- Excellent start-up, acceleration and linearity
- Built-in capacitor module
- Low voltage cut-off for Li‑Po and NiMH
- Over-heat and throttle signal loss protection
Motor
- Powerful 3660 4000kv brushless motor
Servo
- 12 kg-cm metal gear servo (by Savox)
- 4.8V: 0.26 sec/60°, 10.0 kg-cm
- 6.0V: 0.23 sec/60°, 12.0 kg-cm
- 25T horn gear spline
Radio System
- AMP 30 pistol-grip 3-channel transmitter (G82198TX)
- Digital trimming, steering dual-rate and EPA
- Built-in fail-safe, 2.4GHz, 375 g
- Power: 4 × AA Alkaline (not included)
- Receiver: G82198RX, 2.4GHz, DC 4.8–6.0V, 1.35″ × 0.72″ × 0.53″
Body
- 1/10 short course truck body
- Injection-moulded scale body details
Chassis
- Dual Vertical Chassis (DVC) design
- Front/rear high-impact skid plate and bumper
- Full precision ball bearings
- Hex hardware and built-in high-torque servo saver
- Easy-access battery tray (139 × 48 × 26 mm)
Suspension
- Big bore, oil-filled, adjustable coil-over shocks
- Oversize shock bodies with 3.5 mm hardened steel polished shafts
- Fully adjustable suspension geometry
Drivetrain
- 4-wheel drive with aluminium centre shaft
- Full metal transmission gears
- Sealed transmission compartment
- Front, centre and rear differentials (bevel gear type)
Gear Ratio
- Spur/Pinion: M0.8 54T / M0.8 14T
- 37T ring & 13T pinion gear
Wheels & Tyres
- Short course wheels 2.2″/3.0″ with 12 mm hex
- Long-wearing short course truck tyres
Specifications
- Model: 1/10 scale 4WD Reeper Short Course Truck
- Length: 20.9 in (530 mm)
- Width: 11.42 in (290 mm)
- Wheelbase: 12.8 in (325 mm)
- Ground clearance: 8.7 in (220 mm)
- Weight: 5.73 lb (2.6 kg)
Secure Payments
Secured by Stripe
CEN Racing Reeper SC 1:10 4WD RTR Brushless Truck Manuals & Guides
Specifications
CEN RACING REEPER SC 1/10 4WD RTR BRUSHLESS TRUCK - MATTE BLACK WITH RED AND BLUE DECALSTwo decal sheets! Red & Blue decal sheets are included!Features
Key Info:
- Full Matte Black body colour.
- Two decal sheets included (Red & Blue) self-apply decal.
- Driver & navigator models installed.
- Full size spare tyre included.
- Four Wheels Drive.
ESC: BEAST SL G2 80A
- Water-Proof and Dust-Proof for All Weather.
- 32-bit Microprocessor Can Support More Powerful Processing Capability and More Accurate Motor Output.
- Excellent Start-up, Acceleration and Linearity Features.
- Built-In Capacitor Module.
- Low Voltage Cut-Off Protection forLi-Po and NiMH Battery.
- Over-Heat Protection and Throttle Signal Loss Protection.
Motor:
- Powerful 3660 4000kv Brushless Motor.
Servo:
- 12Kg-cm Metal Gear Servo (By Savox).
- 4.8V - 0.26 sec/60° 10.0 kg-cm.
- 6.0V - 0.23 sec/60° 12.0 kg-cm.
- 25T Horn Gear Spline.
Radio System:
- AMP 30 Pistol-Grip 3 Channel Transmitter.
- Digital Trimming.
- Steering Dual-Rate (ST D/R) Adjustment.
- End Point Adjustment (EPA).
- Build in Fail-safe.
- Transmitter Model: G82198TX.
- Frequencies: 2.4GHz.
- Weight: 375gm.
- Power Supply: 4 - AA Alkaline (Not Included).
Receiver Model: G82198RX
- Frequency: 2.4GHz.
- Power Supply: DC 4.8 ~ 6.0V.
- Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).
Body:
- 1/10 Short Course Truck Body.
- Injection Molding Scale Body Details.
Chassis:
- Dual Vertical Chassis Design (DVC).
- F/R Hight Impact Skid plate and Bumper.
- Full Precision Ball Bearing Supported.
- Fully Equipped with Allen Hex Screw.
- Build-in High Torque Servo Saver.
- Easy Access Battery Tray.
- Battery Tray Size 139 x 48 x 26mm.
Suspension:
- Big Bore Oil Filled Adjustable Coil Over Shocks.
- Over Size Shock Body with 3.5mm Hardened Steel Polished Shaft.
- Fully Adjustable Suspensions Geometry.
Drivetrain:
- 4 Wheels Drives.
- Full Metal Transmission Gears.
- Alum Center Shaft Drivetrain.
- Sealed Transmission Compartment.
- Front, Center, and Rear Differential.
- Bevel Gear Type Differential.
Gear Ratio:
- Spur / Pinion Gear M0.8 54T/M0.8 14T.
- 37T Ring & 13T Pinion Gear.
Wheel/Tyres:
- Short Course Truck Wheels 2.2”/3.0” With 12mm Hex.
- Long Wearing Short Course Truck Tyres.
Model: 1/10 Scale 4 wheels Drive Reeper Short Course Truck
Length: 20.9 inches (530mm)
Width: 11.42 inches (290mm)
Wheelbase: 12.8 inches (325mm)
Ground Clearance: 8.7inches (220mm)
Weight: 5.73lb (2.6 kg)
Key Info:
- Brand: CEN
- Part No: CEN9510
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Write a Review
All reviews are subject to moderation
Questions & Answers
No questions yet, why not ask one?
Ask a Question
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.