Your Cart: £0.00

Spend £100.00 more for free shipping!

View Cart and Checkout
E Flite 30 AMP Pro Switching BEC Brushless ESC (Coated) (V2)

E Flite 30 AMP Pro Switching BEC Brushless ESC (Coated) (V2)

Brand: E Flite

Part No: EFLA1030BC

£53.99 RRP £59.99
Pre-Order

The E-flite 30-Amp Pro Switch-mode BEC Brushless ESC (Coated) (V2), part number EFLA1030BC, is a high-quality sensorless controller with an integrated 5V switch‑mode BEC. Delivering up to 30A continuous current (with proper cooling) and 35A burst, it powers your receiver and servos without a separate battery to keep installations light and simple.

A robust 3.5A BEC supports most 3‑axis stabilisation systems and can drive up to seven analogue or six digital standard‑size servos. Safe power‑arm mode prevents accidental starts, while extensive programmability covers braking, throttle range, soft start for helis and aeroplanes, timing, and low‑voltage cutoff options. Pre‑wired EC3 battery input and 3.5mm gold bullet motor connectors speed up installation.

Key Features

  • Up to 30A continuous current with proper airflow; 35A burst for 15 seconds
  • 3.5A continuous, 5V switch‑mode BEC circuit
  • Stronger BEC for support of most 3‑axis stabilisation systems
  • Drives up to 7 analogue or 6 digital standard‑size servos
  • Programmable motor braking
  • Safe power‑arm mode helps prevent accidental starts
  • Programmable low‑voltage cutoff: 3S Li‑Po (9.2V), 4S Li‑Po (12V) or 74% of starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and aeroplanes
  • Auto motor shutdown if signal is lost or interference is detected
  • Programmable timing with 5 user‑selectable ranges for a wide variety of brushless motors
  • Pre‑wired connectors: E‑flite EC3 on battery input; 3.5mm gold bullet connectors on motor leads

Specifications

  • Continuous Maximum Current: 30A (proper cooling required)
  • Momentary Peak Current: 35A (15 sec)
  • Input Voltage: 3–6S Li‑Po or 9–18 Ni‑MH/Ni‑Cd
  • Input Connector: 16 AWG leads with E‑flite EC3 connector
  • Output Connectors: 16 AWG leads with 3.5mm gold bullet connectors
  • Length: 51.0mm (2.00 in)
  • Width: 28.0mm (1.10 in)
  • Height: 8.70mm (0.35 in)
  • Weight: 31.0 g (1.10 oz)
  • Wire Gauge: 16 AWG

The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
E Flite 30 Amp Pro Switching BEC Brushless ESC (Coated) (V2) Features:

  • Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
  • 3.5A continuous current, 5V Switch-Mode BEC Circuit
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-size servos with the BEC
  • 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
  • Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads


E Flite 30 Amp Pro Switching BEC Brushless ESC (Coated) (V2) Specifications:

  • Continuous Maximum Current: 30A (proper cooling required)
  • Input Voltage: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
  • Input Connector Types: 16 AWG leads with E-flite EC3 Connector
  • Output Connector Types: 16 AWG leads with 3.5mm Gold Bullet Connectors
  • Momentary Peak Current: 35A (15 sec)
  • Length: 51.0mm (2.00 in)
  • Width: 28.0mm (1.10 in)
  • Height: 8.70mm (0.35 in)
  • Weight: 31.0 g (1.10 oz)
  • Wire Gauge: 16 AWG


Key Info:
  • Brand: E Flite
  • Part No: EFLA1030BC
  • Barcode: 605482079201
  • Fitment: Standard Part
Standard Shipping

£3.95 to most of the UK

Express Shipping

£6.95 to most of the UK

Worldwide Shipping

Available at checkout

Reviews
No specific product reviews yet, why not write one?
WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

For more in depth queries, please contact us.