GBP
€ Euro
$ USD
Force .36 5.9cc Car/Truck Nitro Engine With Pullstart (36R01)
Brand: Force
Part No: 4476547
SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
Why not contact our team to see if an alternative is available?
The Force .36 (5.9cc) car/truck nitro engine with pullstart (36R01) delivers large-displacement performance for 1/8-scale applications. Featuring an ABC construction and rear exhaust layout, this unit is designed as a strong upgrade or replacement powerplant. Part number 4476547.
Force is a long-established nitro engine manufacturer whose power units appear in many well-known RC brands. This .36 engine uses standard clutch setup and mounting locations to simplify installation across a wide range of 1/8-scale vehicles.
Specifications
- Displacement (C.C.): 5.89
- Bore: 21 mm
- Stroke: 17 mm
- Output: 3.76 ps
- Practical RPM Range: 6,500–35,000
- Type: 36 ABC, rear exhaust, pull start
- Weight: 456 g
Suggested Compatibility
Based on the manufacturer information, this engine has suggested compatibility with the following 1/8-scale models and platforms:
- Many 1/8-scale nitro cars
- Hyper 7
- Hyper 8
- HPI Savage .21 / .25 / SS / 4.6 / X
- Hong Nor X1 CR / CRT
- Schumacher Fusion
- Schumacher Menace
- Schumacher Havoc
- Schumacher Swift
- Thunder Tiger EB4
- Thunder Tiger MTA-4
- Associated MGT
Some vehicles may require alternative engine mounts.
Secured by Stripe
Force is a far eastern Nitro Engine manufacturer that supplies Nitro engines to many a well know RC brand. Got a HPI vehicle? Is the engine an "F", well the "F" stand for Force...
This is superb value, No other Nitro engine of this size is available at this price. Superb quality internals and compatibility with current roto starts and pull starts make Force the only choice.
Using standard clutch set up and mounting locations make this a drop in fit for the HPI Savage Nitro versions.
Suitable for...
- Pretty much any 1/8th Nitro car!
- Hyper 7
- Hyper 8
- HPI Savage .21 .25 SS 4.6 X
- Hong Nor X1 CR / CRT
- Schumacher Fusion
- Schumacher Menace
- Schumacher Havoc
- Schumacher Swift
- Thunder Tiger EB4
- Thunder Tiger MTA/4
- Associated MGT
Force .36/5.9cc Features:
- Bore - 21mm
- C.C. - 5.89
- Output - 3.76ps
- Practical RPM range - 6500~35000
- Stroke - 17mm
- Type - 36 ABC, rear exhaust, pull start,
- Weight - 456g
Some vehicles may require alternative engine mounts though it is 100% straight fit in the HPI Savage.
Key Info:
- Brand: Force
- Part No: 4476547
- Barcode: 5051121134841
- Displacement: 5.9cc (0.36ci)
- Starter: Pull Start
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
Questions & Answers
That is 12mm hex and it does not come with a glow plug usually.
Yes that will fit , we have not fitted one to that so cannot say which mounts would work but more than likely you will be able to use your standard ones.
A rough factory setting for most engines is
3.5 turns from closed on the main needle
flush with the housing on the second needle
Then about a 1mm gap in the carb for the idle
No, this would not fit any engine .21 or above is a big block engine and would not fit. you would need a small block engine so anything from .12 to .18 size
It's been a while since I've seen one of those, but I checked with Losi who advise your .32 2-stroke should have standard big block mounting dimensions - so ye, this should fit
That does depend a little on what you're fitting it into? However pretty much any standard clutch should fit. Some nice options would be say TLR342014 or TLR9101 or REDMUQU0063
Now resolved
Last batch of these we had came with a 12mm OWB
I'm 99% sure it's a no on that. Any standard exhaust gasket and collet will fit though
Yes that should work fine with OS number 8 plugs
It's very, very similar....
ASK A QUESTION
For more in depth queries, please contact us.